Sollte es jemals Mediaguard unterstützen?

Unterforum zur Enigma2 Firmware<br>Da es sich hierbei nicht um eine Firmware der Firma Topfield handelt, schliessen wir jeden Support und die Verantwortung für Defekte aus, die durch die Anwendung dieser Firmware entstehen können.
HadrianHolland
Topfazubi
Topfazubi
Beiträge: 40
Registriert: Mo 1. Dez 2008, 15:57
Receivertyp: TF 7710 HDPVR 23331
Receiverfirmware: 7.00.33 (23131)
Wohnort: Arnheim (Niederlaende)
Kontaktdaten:

Sollte es jemals Mediaguard unterstützen?

#1

Beitrag von HadrianHolland » Sa 3. Okt 2009, 13:47

(Dieser Text wurde übersetzt mit Google Translate.)
English below!

Seit Beginn der Enigma auf Topfield, war ich sehr enthusiastisch über die Entwicklungen, die im Gange waren. TDT gab mehr Updates als Topfield und effektiv gelöst werden mehr Fehler.
Doch eine Sache habe ich noch nicht von ihnen scheinen (und ich bedauere, dass) ist MediaGuard (oder Seca2 / 3) zu unterstützen. Und das ist schade. Ich bin gespannt, umstellen, aber ohne die niederländischen Programme gäbe es nicht viel Grund für den Wechsel. Gibt es also jemanden von TDT, oder jemanden, der sie näher kennt, die mir sagen kann, ob es irgendwelche Pläne überhaupt MediaGuard (Seca2 / 3) in der Zukunft unterstützen werden? Wenn nicht, muß ich bedaure, dass ich Interesse wird in diesem Projekt Enigma2 verlieren, wie spannend es sein mag. TDT gute Arbeit leistet, aber es wird nicht noch einen Sinn für mich, leider.
----
Should there ever be Mediaguard support?

Since the beginning of Enigma on Topfield, I was quite enthousiastic about the developments that were going on. TDT gave more updates than Topfield, and solved more bugs effectively.
However, one thing I still have not seem from them (and I really regret that) is MediaGuard (or SECA2/3) support. And that's too bad. I am eager to switch over, but without the Dutch channels there wouldn't be much reason for switching. So, is there anyone from TDT, or someone who knows them closer, that can tell me if there are any plans at all to support MediaGuard (SECA2/3) in the future? If not, I must regret that I will lose interest in this Enigma2 project, how exciting it may be. TDT is doing good work, but it won't be of any use for me, regrettably.
Entschuldigung wenn sie mich nicht verstehen.
If you really don't understand, please use another language.

Benutzeravatar
Maliboy
LkLbBuMiBdss
SiFalsswoemifTpHW

<div title=Logoistiker, kindlicher Liebhaber bunter Blumen und Mod in Black, der sich seinen Status im Forum am liebsten selbst setzten will, obwohl er manchmal im falschen Thread postet HabenWoller>LkLbBuMiBdss<br>SiFalsswoemifTpHW</div>
Beiträge: 30572
Registriert: So 11. Dez 2005, 12:41
Wohnort: Bad Neuenahr-Ahrweiler
Receivertyp: VU+ Ultimo 4k
Wohnort: Bad Neuenahr-Ahrweiler
Kontaktdaten:

AW: Sollte es jemals Mediaguard unterstützen?

#2

Beitrag von Maliboy » So 4. Okt 2009, 08:49

I don't understand, what you mean. Is there no working CI Modul for Mediaguard/Seca?
Ich you mean, that Mediaguard/seca Support will be embedded, so I must say you: This will be illigal and not discuss in this forum!
Tschau,
Kai

SONY KD-49X8505B - KDG CI+ SC: G09 (DigitalFree, Privat HD)
ULTIMO 4k (mit Vti Image)
Bald in Rente: CRP2401CI+ - ACL V1.16: D02 (DigitalFree, Privat HD, Sky) TAPs:
AutoStart: SmartEPG, SmartFiler, CallMonitor, FastSkip, TMSTelnetD,

SONY KDL-40W3000 ACL 1.16: D02 (DigitalFree, Privat HD)
Kabelanschluß: Vodafone/KDG (NE4)

HadrianHolland
Topfazubi
Topfazubi
Beiträge: 40
Registriert: Mo 1. Dez 2008, 15:57
Receivertyp: TF 7710 HDPVR 23331
Receiverfirmware: 7.00.33 (23131)
Wohnort: Arnheim (Niederlaende)
Kontaktdaten:

AW: Sollte es jemals Mediaguard unterstützen?

#3

Beitrag von HadrianHolland » So 4. Okt 2009, 16:54

[quote="Maliboy"]I don't understand, what you mean. Is there no working CI Modul for Mediaguard/Seca?
Ich you mean, that Mediaguard/seca Support will be embedded, so I must say you: This will be illigal and not discuss in this forum![/quote]

(Übersetzung unter)
There are multiple CAMs for MediaGuard: AstonCAM, PowercamPro and CanalDigitaal/TVV modules. I have the Aston CAM and I'm having a bid on a PowerCam on Marktplaats (Dutch eBay site).
The problem is that TDT says that CI-modules are supported (though only in the upper slot). My experience is that I can't watch the scrambled channels from CanalDigitaal. I have the full rights (I usually watch them with Topfield's firmware), it's just that the AstonCam isn't working on Engigma. It has nothing to do with illegal requests.
I just wonder if TDT will ever investigate why this doesn't work. I already sent log files to them, but after that it became silent...

----
Es gibt mehrere CAMs für MediaGuard: AstonCAM, PowercamPro und CanalDigitaal / TVV-Module. Ich habe das Aston CAM und ich habe ein Angebot für ein PowerCam auf Marktplaats (Niederländisch eBay-Website).
Das Problem ist, dass TDT sagt, dass CI-Module unterstützt werden (allerdings nur in den oberen Steckplatz). Meine Erfahrung ist, dass ich nicht die verschlüsselten Kanäle von CanalDigitaal beobachten kann. Ich habe die vollen Rechte (Ich beobachte sie mit Firmware Topfield's), es ist nur, dass die AstonCam nicht funktioniert auf Engigma. Es hat nichts mit illegalen Zugriffe zu tun.
Ich frage mich nur, wenn TDT will untersuchen, warum dies nicht funktioniert. I already sent Log-Dateien, um sie, aber danach wurde es still ...
Entschuldigung wenn sie mich nicht verstehen.
If you really don't understand, please use another language.

Benutzeravatar
Maliboy
LkLbBuMiBdss
SiFalsswoemifTpHW

<div title=Logoistiker, kindlicher Liebhaber bunter Blumen und Mod in Black, der sich seinen Status im Forum am liebsten selbst setzten will, obwohl er manchmal im falschen Thread postet HabenWoller>LkLbBuMiBdss<br>SiFalsswoemifTpHW</div>
Beiträge: 30572
Registriert: So 11. Dez 2005, 12:41
Wohnort: Bad Neuenahr-Ahrweiler
Receivertyp: VU+ Ultimo 4k
Wohnort: Bad Neuenahr-Ahrweiler
Kontaktdaten:

AW: Sollte es jemals Mediaguard unterstützen?

#4

Beitrag von Maliboy » So 4. Okt 2009, 17:18

OK, that means the question in the headline is wrong. The correct question is: 'When will the AstonCAM will work with Enigma'.

The problem is: Here we only discuss over enigma for the TOPFIELD. I don't know if one of the developer looks in this forum too. I/we hope it, but we doesn't know.
Tschau,
Kai

SONY KD-49X8505B - KDG CI+ SC: G09 (DigitalFree, Privat HD)
ULTIMO 4k (mit Vti Image)
Bald in Rente: CRP2401CI+ - ACL V1.16: D02 (DigitalFree, Privat HD, Sky) TAPs:
AutoStart: SmartEPG, SmartFiler, CallMonitor, FastSkip, TMSTelnetD,

SONY KDL-40W3000 ACL 1.16: D02 (DigitalFree, Privat HD)
Kabelanschluß: Vodafone/KDG (NE4)

Antworten

Zurück zu „Enigma2“