TTD Forum

Hello
Sorry if somebody had already discussed this topics but i do not read German and after several hours of search I've preferred to open a new topic
I have a SRP-2100 receiver and i trying to use it again after few years of storage. Unfortunately the present transponder frequencies set up for Eutelsat 5W do not correspond to new frequencies used by the satellite operator for my package (BISTV).
I would like to modify the transponder frequencies for Eutelsat 5W to fit new frequencies.
I've downloaded software Set Top but do not supported SRP-2100, software Vega is for only old Windows OS.
I don't know what to do now! Is there anybody who could give some direction?
Thank you for your help.

Set the frequencies with your remote control using the keys 0 to 9.

Viele Grüße
Homer

You could also use the TAP ChannelListSaver to edit Transponder Lists on your PC.

[quote="Homer"]Set the frequencies with your remote control using the keys 0 to 9.

Viele Grüße
Homer[/quote]

Hello
Sorry for this late answer. Thank you for your help.
I tried to find a menu which allow me to change frequencies but on my SRP-2100 but no way to modify transponder frequencies values by remote control keys.
Thank you for your help.
Best regards.
Laurent Kervaut

Yes there is.
Go to the channel search menu. Select manual search. Change to the frequency field. DON'T PRESS OK, but simply start typing the frequency using the number keys of the remote control. Adjust the remaining settings according to the desired transponder. Start search.

Homer hat geschrieben:Set the frequencies with your remote control using the keys 0 to 9.

Viele Grüße
Homer

Anthea hat geschrieben:Yes there is.
Go to the channel search menu. Select manual search. Change to the frequency field. DON'T PRESS OK, but simply start typing the frequency using the number keys of the remote control. Adjust the remaining settings according to the desired transponder. Start search.

Hello
I've finally find out the procedure with your help. Thank you very much.