TMSCommander

[okiwankenoki]

Hello John,

I have a little feature request:
Can you change the TMSCommander menus also to german language?

Gerti detected the language automatically in the TMS and set the correct language.

Can you do the same for us?

I can help you for the german translation



Yours Olaf

[deangelj]

Hi Olaf - sure, I know how to check the language. Yes, if you can please send me the translations for the messages I will add the German support.

cheers,
John

[TV-Junkie]

Armer TV-Junkie.

[okiwankenoki]

Hi Olaf - sure, I know how to check the language. Yes, if you can please send me the translations for the messages I will add the German support.

cheers,
John

Hello John,

here my german translation


Thank you for integration!

Yours Olaf

[deangelj]

Updated TMSCommander to 0.8 - changes include:

- add general language support (German/English language file included) - thanks to Olaf/Firebird
- Firebird's mods to disable taps

Need to copy the TMSCommander.lng file to the same folder as the .TAP.

cheers,
john

[FireBird]

[quote="deangelj"]Need to copy the TMSCommander.lng file to the same folder as the .TAP.[/quote]
But could also be ProgramFiles or ProgramFiles/Settings.

[okiwankenoki]

Updated TMSCommander to 0.8 - changes include:

- add general language support (German/English language file included) - thanks to Olaf/Firebird
- Firebird's mods to disable taps

Need to copy the TMSCommander.lng file to the same folder as the .TAP.

cheers,
john

Hello deangelj,

You are the best

please correct this point:
old
de_024= Mehr Informationen (derzeit Anzeige der unterstützen Funktionen)

new
de_024= Mehr Informationen (derzeit Anzeige der unterstützten Funktionen)

After changing this I cannot see the last brace in the menu

I see
Mehr Informationen (derzeit Anzeige der unterstützen Funktionen

correct is:
Mehr Informationen (derzeit Anzeige der unterstützen Funktionen)

please have a look to this...

Have nice days, and a lot of easter eggs

Yours Olaf

[Fritzcat]

But could also be ProgramFiles or ProgramFiles/Settings.

Please add : ProgramFiles/Settings/TMSCommander

[TV-Junkie]

yepp

[FireBird]

Please add : ProgramFiles/Settings/TMSCommander

Did you try it?

Mehr Informationen (derzeit Anzeige der unterstützen Funktionen

This is a limitation of the FBLib which limits the waste of memory. I'll increase the maximum string size a bit, so that it'll fit.

[Töppi]

With the version 0.8 all TAPs are displayed with white textcolor, even if there are supportet or not.
This was a nice feature. Did you remove it, or is it a little bug?

[FireBird]

This is a feature because now you can disable every TAP, even if it is not TMSCommander aware. Disabling means that it doesn't receive any events, so you can check which TAP e.g. steals key events.

[deangelj]

And you can tell which TAPs support which features by scrolling to that TAP and you will get the appropriate buttons. If you don't get a MENU or STOP button then that TAP doesn't support it. You can also press Info (each time gives you different info) to see what each TAP supports.

[Töppi]

I found the buttons, but it was nice to see which TAP supports TMSCommander directly...
The grey lines were deactivatet, right?
than I got the problem......

[Melmak]

Hi deangelj,
thank you for this Tap!

[Sirius]

Hi deangelj,

very nice TAP!!

But I have one Problem:
Sometimes when I turned off the TMS it starts after some seconds again by himself!
Today i found out this is always when I deactivate a TAP with TMSCommander0.8 and then turned the TMS off. (before reactivating it)
Is this not allowed, or a known bug?

(in german):
Manchmal wenn ich den TMS ausschalte startet er nach wenigen Sekunden erneut von alleine!
Heute habe ich festgestellt, dass es immer dann passiert wenn ich ein TAP mit TMSCommander0.8 deaktiviere und danach den TMS ausschalte. (ohne es vorher zu reaktivieren)
Ist diese Vorgehensweise nicht zulässig, oder ist es ein bekannter Bug?

[deangelj]

Hello Sirius,

I have tried to repro this but cannot. Is it always the same TAP that you de-activate?

[Sirius]

Hello deangelj,

Yesterday it was a combination of several TAPs which I deactivated. So I thought the problem is generally with every TAP.
Today I tested all my used TAPs individually, and you are right, the problem occurs only with some specific TAPs.

Here my result:

ScreenCapture_OSD_TMS3.2 => no problem
Quickplay2.95i => no problem
iBox1.3a => no problem
FastSkip_TMS0.95.1 => no problem
JAG's EPG => => no problem EDIT: => TMS starts after Shutdown
TMSDisplay1.5 => TMS starts after Shutdown
TMSRemote1.3 => TMS starts after Shutdown
CallMonitor1.2 => TMS starts after Shutdown

[FireBird]

Ist das die Reihenfolge, wie vom TMSCDR ausgegeben? Wo befindet sich TMSCDR in der Liste?

[Sirius]

TMSCommander zeigt mir folgende Liste: (wie in Sig.)

ScreenCapture_OSD_TMS3.2
Quickplay2.95i
iBox1.3a
FastSkip_TMS0.95.1
TMSCommander0.8
JAG's EPG
TMSDisplay1.5
TMSRemote1.3
CallMonitor1.2

Hatte auch mal ohne XStart im AutoStart getestet, also keine TAPs beim Start geladen.

Dann nur TMSCommander und CallMonitor gestartet.
Im TMSCommander den CallMonitor deaktiviert, mit Exit Menu verlassen.
Dann Power Off => TMS starts after Shutdown

Bei allen Tests habe ich gewartet bis XStart beendet war.