WebControl

TAPs für die SRP- und CRP-Serie
Benutzeravatar
Miss Sophie
Feurige Götterbotin
Feurige Götterbotin
Beiträge: 576
Registriert: Di 20. Apr 2010, 15:21
Receivertyp: SRP 2410 + TFIR
Receiverfirmware: aktuellste
Wohnort: Süddeutschland und Wien

AW: WebControl

#61

Beitrag von Miss Sophie » So 27. Jul 2014, 13:58

Getting the information via TTD: 4.1 is used... and also installed on the PC...
Cheers,
Miss Sophie


TAPs: FastSkip / SmartEPG / SmartFiler / NiceDisplay / TMSRemote / RebuildNAV / BackupSettings / ScreenSaver
TAPs im Standby: TTD / lost&found / RestoreSettings / HDDInfo / NASMount

PC: TFTool / TMSRemote / RecConverter / Vega

Wohnzimmer: SRP2410, Sony 46HX905, Sony BDP-S470, Denon DVD-2930, Denon AVR-4306, Nubert AW-1000, 4 x Nubert WS-12, Nubert CS-72, Harmony One

Benutzeravatar
Miss Sophie
Feurige Götterbotin
Feurige Götterbotin
Beiträge: 576
Registriert: Di 20. Apr 2010, 15:21
Receivertyp: SRP 2410 + TFIR
Receiverfirmware: aktuellste
Wohnort: Süddeutschland und Wien

AW: WebControl

#62

Beitrag von Miss Sophie » So 27. Jul 2014, 14:03

I tried it directly on the telly: the config screen came up but quickly disappears after showing at about a quarter of a second.
Cheers,
Miss Sophie


TAPs: FastSkip / SmartEPG / SmartFiler / NiceDisplay / TMSRemote / RebuildNAV / BackupSettings / ScreenSaver
TAPs im Standby: TTD / lost&found / RestoreSettings / HDDInfo / NASMount

PC: TFTool / TMSRemote / RecConverter / Vega

Wohnzimmer: SRP2410, Sony 46HX905, Sony BDP-S470, Denon DVD-2930, Denon AVR-4306, Nubert AW-1000, 4 x Nubert WS-12, Nubert CS-72, Harmony One

Benutzeravatar
TV-Junkie
Alteingesessener
Alteingesessener
Beiträge: 28022
Registriert: Sa 16. Jun 2007, 19:10
Receivertyp: VU+ Duo4K, Ultimo4K und Uno4KSE
Receiverfirmware: VTI 15.xx ausser der Uno 4K SE
Wohnort: Düsseldorf

AW: WebControl

#63

Beitrag von TV-Junkie » So 27. Jul 2014, 16:43

Wegen der Version, da schaue ich gleich nochmal :)
Wegen dem markieren, geil, was ich alles kann :lol: mal im Ernst, ich habe die STRG Taste festgehalten und die Aufnahmen markiert :)
Gruß Ha-Jü
----------------------------------------------------------------------------------------------
Zum Tippspiel BuLi 2019/2020 hier entlang
Und wer Lust auf tippen beim DFB Pokal hat, darf sich hier austoben
Viel Spaß

Sat-Anlage: Astro CAS 90 mit Kathrein UAS 584 LNB (20Jahre alt und noch immer Top in Schuss :D ), Jultec JPS0506-8T Unicable Multischalter sowie UM/VF West Kabelanschluß
Installierte Plugins:OScam (incl OScam-Butler), LV4, SmartEPG VU+, ansonsten nix, was VTI nicht schon selbst mitbringt :)

Benutzeravatar
TV-Junkie
Alteingesessener
Alteingesessener
Beiträge: 28022
Registriert: Sa 16. Jun 2007, 19:10
Receivertyp: VU+ Duo4K, Ultimo4K und Uno4KSE
Receiverfirmware: VTI 15.xx ausser der Uno 4K SE
Wohnort: Düsseldorf

AW: WebControl

#64

Beitrag von TV-Junkie » So 27. Jul 2014, 19:20

jkIT, hast recht, habe eben auf die Version geupdatet :)
Gruß Ha-Jü
----------------------------------------------------------------------------------------------
Zum Tippspiel BuLi 2019/2020 hier entlang
Und wer Lust auf tippen beim DFB Pokal hat, darf sich hier austoben
Viel Spaß

Sat-Anlage: Astro CAS 90 mit Kathrein UAS 584 LNB (20Jahre alt und noch immer Top in Schuss :D ), Jultec JPS0506-8T Unicable Multischalter sowie UM/VF West Kabelanschluß
Installierte Plugins:OScam (incl OScam-Butler), LV4, SmartEPG VU+, ansonsten nix, was VTI nicht schon selbst mitbringt :)

Benutzeravatar
FireBird
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Beiträge: 28745
Registriert: Fr 9. Dez 2005, 09:59
Receivertyp: SRP-2401CI+ TFIR
vu+ Duo 4k
Wohnort: Wien

AW: WebControl

#65

Beitrag von FireBird » So 27. Jul 2014, 20:35

[quote="Miss Sophie"]I tried it directly on the telly: the config screen came up but quickly disappears after showing at about a quarter of a second.[/quote]
Do you have the SmartEPG clock enabled?

Benutzeravatar
jkIT
TFtool-Guru
TFtool-Guru
Beiträge: 3182
Registriert: Sa 10. Dez 2005, 18:26
Receivertyp: TF4000 & TF5000MP & SRP-2410
Kontaktdaten:

AW: WebControl

#66

Beitrag von jkIT » Di 29. Jul 2014, 10:10

TV-Junkie hat geschrieben:Wegen dem markieren, geil, was ich alles kann :lol: mal im Ernst, ich habe die STRG Taste festgehalten und die Aufnahmen markiert :)

Besser gesagt, was der Firefox alles kann :D
Wieder was gelernt. Aber egal, was der FF da so schön markiert, ausgewertet wird es nicht.
Gruß jkIT

CRP-2401; SRP-2410 (aD); TF5000MP (aD); TF4000PVR (aD); TFtool, aTMSremote (Autor)

Yog-Sototh
Topfversteher
Topfversteher
Beiträge: 348
Registriert: So 6. Jan 2008, 19:51
Receivertyp: Topf 2401CI+ Eco und Srp 2410
Receiverfirmware: Topf 2401CI+ Eco - SystemID 22570, Loader v1.03, GeräteVersion v1.0.1.

AW: WebControl

#67

Beitrag von Yog-Sototh » Di 29. Jul 2014, 11:39

Hallo
ich habe das TAP zum Ausprobieren mal via TAP-to-date instaliert.
Insgesamt war das Verhalten des Topfs danach komisch. Oben im Bildschirm liefen sämtliche Senderbezeichnungen durch. Dann Neustart.
Dann liefen die Senderbezeichnungen wieder durch und wieder Neustart.
Ich habe das ganze dann mit 0 unterbrochen und das TAP wieder deinstaliert.

Hatte das schonmal jemand und was hab ich falsch gemacht?
VU+ Uno 4K SE mit VTI 15.0 und SmartEPG VU+
VU+ Zero DVB-S2 mit VTI 15.0 und SmartEPG VU+

****

alt und immer noch am Start
LG 75SK8100 & Topf 2410, PS5 & 4, Xbox Series X & One und noch Synology NAS

Panasonic Plasma P55 VTW60 & Topf SRP 2401CI+ Eco incl. Bukos Lüfterkit und 2,5 Zoll Festplatte und Sky V14 & Synology NAS

Taps: AutoPin, BackgroundCopy, Infplus, RebuildNAV, SmartDecr.,SmartEPG_TMS, SmartFiler TMS,TapToDate,TimerDiags, NAS-Mount XBlockfTopfieldFiler

Benutzeravatar
FireBird
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Beiträge: 28745
Registriert: Fr 9. Dez 2005, 09:59
Receivertyp: SRP-2401CI+ TFIR
vu+ Duo 4k
Wohnort: Wien

AW: WebControl

#68

Beitrag von FireBird » Di 29. Jul 2014, 11:44

Ich hatte zwar am Ende des ersten Durchlaufs auch einen Reboot, danach hat es aber funktioniert. Starte es testweise einmal manuell und nicht über den AutoStart.

Benutzeravatar
schasskistn
Nicht-Guru (A)
Nicht-Guru (A)
Beiträge: 281
Registriert: Fr 9. Dez 2005, 11:23
Receivertyp: SRP2401CI+ als Hauptkiste
TF5500PVR, supporte noch einen 5000MP
Receiverfirmware: HD: 10.9.2013
SD: September 05
Wohnort: Austria, ADW - nähe Salzburg
Kontaktdaten:

AW: WebControl

#69

Beitrag von schasskistn » Di 29. Jul 2014, 12:48

Bei mir ebenfalls beim ersten Durchlauf einen Reboot, der zweite beherzte Start war dann i.O. :)

I experienced the same as FireBird, after the initial Channel/Logo Build my 2401 rebooted. After that, I had no issues (it rebuilt the logo files again).

Immer wild unterwegs in RFID/NFC/Mobile Payment für Festivals, Stadien und Clubs. Es gibt kaum was besseres als Party für die Arbeit :D
http://www.enemyinside.com
>> thrash >> death >> metal >> austria >>


für das Wohnzimmer: SRP2401CI+, 1TB, SmartEPG, TMSRemote, RemoteSwitch, SmartDecrypter und natürlich TapToDate
5500 im Keller; 5000er als Ersatzteilspender

DeltaMikeCharlie
WebController
WebController
Beiträge: 469
Registriert: Di 7. Mai 2013, 05:11
Wohnort: Australia

AW: WebControl

#70

Beitrag von DeltaMikeCharlie » Di 29. Jul 2014, 13:23

[quote="Yog-Sototh"]Hallo
ich habe das TAP zum Ausprobieren mal via TAP-to-date instaliert.
Insgesamt war das Verhalten des Topfs danach komisch. Oben im Bildschirm liefen sämtliche Senderbezeichnungen durch. Dann Neustart.
Dann liefen die Senderbezeichnungen wieder durch und wieder Neustart.
Ich habe das ganze dann mit 0 unterbrochen und das TAP wieder deinstaliert.

Hatte das schonmal jemand und was hab ich falsch gemacht?[/quote]

Try loading WebControl-Config manually and pressing the blue key to rebuild the logos. Does the PVR reboot?

Benutzeravatar
mini49
gefährdete Rätselquelle
gefährdete Rätselquelle
Beiträge: 1976
Registriert: Do 9. Jun 2011, 21:06
Receivertyp: SRP-2401CI+
VU+DUO4KSE
Receiverfirmware: Jan 15 2020
Wohnort: Raum Amstetten, NÖ

AW: WebControl

#71

Beitrag von mini49 » Mi 30. Jul 2014, 20:35

Hallo,

I have the same problem as Yog-Sototh. There is no difference if I create the logos with the Config-TAP or with the WebControl-TAP itself. It works for nearly 3 minutes and then the SRP reboots with check files & folders. See log at 20:02:53 and 20:05:48. The problem is reproducable. In my case it crashes always at Radio Horeb. I use 2 satellites (Astra + Hotbird) with 2021 TV and 439 radio stations. Are there some debug-otions I might be able to help with?

Thanks for your work
mini49
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Zuletzt geändert von mini49 am Mi 30. Jul 2014, 21:04, insgesamt 1-mal geändert.
2x quattro LNB für Astra + Hotbird
Triax TMU983c vor Hirschmann CKR9160ND - umgestiegen auf Unicable mit 2x3 SAT-Tunern
10x VU+DUO 4K SE mit 8x DVB-S2X FBC Twin Tuner, 7x DVB-T2 Dual Tuner, 1x DVB-C FBC Tuner, 1-2 TB SSD
Image: VTI 15.0.02 Skin: Atile HD + Atlle HD pro
Plugins: vuTransferChannels | VU+Remote | AutoCutVFD | Automatic Full Backup | Automove | backsNcovers | CheckFreeSpace | Dateimanager-VTi | GithubPluginUpdater | Kiosk | InfoBarTunerState | MultiQuickButton | OpenWebif | Oscam + OscamButler | ORFSAT1Teletext | PiconManager | Serienrecorder | ServiceScanUpdates | SmartEPGvu+ | TMDb | VPS | VWeather3

Benutzeravatar
mini49
gefährdete Rätselquelle
gefährdete Rätselquelle
Beiträge: 1976
Registriert: Do 9. Jun 2011, 21:06
Receivertyp: SRP-2401CI+
VU+DUO4KSE
Receiverfirmware: Jan 15 2020
Wohnort: Raum Amstetten, NÖ

AW: WebControl

#72

Beitrag von mini49 » Mi 30. Jul 2014, 20:42

[quote="Miss Sophie"]I tried it directly on the telly: the config screen came up but quickly disappears after showing at about a quarter of a second.[/quote]


[quote="FireBird"]Do you have the SmartEPG clock enabled?[/quote]

Same problem here, SmartEPG clock is enabled! Pressing OK brings the config screen up again.

mini49
Zuletzt geändert von mini49 am Mi 30. Jul 2014, 21:03, insgesamt 1-mal geändert.
2x quattro LNB für Astra + Hotbird
Triax TMU983c vor Hirschmann CKR9160ND - umgestiegen auf Unicable mit 2x3 SAT-Tunern
10x VU+DUO 4K SE mit 8x DVB-S2X FBC Twin Tuner, 7x DVB-T2 Dual Tuner, 1x DVB-C FBC Tuner, 1-2 TB SSD
Image: VTI 15.0.02 Skin: Atile HD + Atlle HD pro
Plugins: vuTransferChannels | VU+Remote | AutoCutVFD | Automatic Full Backup | Automove | backsNcovers | CheckFreeSpace | Dateimanager-VTi | GithubPluginUpdater | Kiosk | InfoBarTunerState | MultiQuickButton | OpenWebif | Oscam + OscamButler | ORFSAT1Teletext | PiconManager | Serienrecorder | ServiceScanUpdates | SmartEPGvu+ | TMDb | VPS | VWeather3

DeltaMikeCharlie
WebController
WebController
Beiträge: 469
Registriert: Di 7. Mai 2013, 05:11
Wohnort: Australia

AW: WebControl

#73

Beitrag von DeltaMikeCharlie » Mi 30. Jul 2014, 22:00

When the logos are automatically built, WebControl actually loads WebControl-Config in batch mode. It rebuilds the logos and exits.

Can you tell me if the following files are created on the PVR in /ProgramFiles/Settings/WebControl/public_html? The best way to check would be via ftp. Also what size is each file.
  • service-logos.log
  • service-logos.png
  • service-logos.css
  • service-logos.txt
With regards to the "Radio Horeb" logo, I assume that it works fine in SmartEPG. You can try manually overriding the SE logo with a PNG.

Here are instructions in how to generate the logo PNG.

http://deltamikecharlie.yolasite.com/re ... tup-EN.pdf
http://deltamikecharlie.yolasite.com/re ... tup-DE.pdf

If you are still having problems, there are 3 ways that you could try to stop the logos from being automatically built in v1.10:
  1. Move WebControl-Config to another folder.
  2. Rename WebControl-Config to something else.
  3. Manually create "service-logos.log", "service-logos.png", "service-logos.css" and "service-logos.txt" on the PVR in "public_html" as zero byte files. This will fool WebControl into not building the logos, but may impact the functionality of the front end.
You could also uninstall v1.10 and install v1.01 from TAPtoDate. The auto-logos feature was new to v1.10.

I plan to disable the auto-logos feature in the next release, it was meant to speed up the configuration process for new users. Unfortunately, it has had unforeseen consequences for some users.

You also have 2500+ channels. I will also look into the possibility that WebControl-Config has a memory management problem with that many channels.

Benutzeravatar
mini49
gefährdete Rätselquelle
gefährdete Rätselquelle
Beiträge: 1976
Registriert: Do 9. Jun 2011, 21:06
Receivertyp: SRP-2401CI+
VU+DUO4KSE
Receiverfirmware: Jan 15 2020
Wohnort: Raum Amstetten, NÖ

AW: WebControl

#74

Beitrag von mini49 » Mi 30. Jul 2014, 22:24

Here ist the requested Information:

service-logos.log size 1,02MB

service-logos.png doesn't exist

service-logos.css size 210KB

service-logos.txt size 77KB
2x quattro LNB für Astra + Hotbird
Triax TMU983c vor Hirschmann CKR9160ND - umgestiegen auf Unicable mit 2x3 SAT-Tunern
10x VU+DUO 4K SE mit 8x DVB-S2X FBC Twin Tuner, 7x DVB-T2 Dual Tuner, 1x DVB-C FBC Tuner, 1-2 TB SSD
Image: VTI 15.0.02 Skin: Atile HD + Atlle HD pro
Plugins: vuTransferChannels | VU+Remote | AutoCutVFD | Automatic Full Backup | Automove | backsNcovers | CheckFreeSpace | Dateimanager-VTi | GithubPluginUpdater | Kiosk | InfoBarTunerState | MultiQuickButton | OpenWebif | Oscam + OscamButler | ORFSAT1Teletext | PiconManager | Serienrecorder | ServiceScanUpdates | SmartEPGvu+ | TMDb | VPS | VWeather3

DeltaMikeCharlie
WebController
WebController
Beiträge: 469
Registriert: Di 7. Mai 2013, 05:11
Wohnort: Australia

AW: WebControl

#75

Beitrag von DeltaMikeCharlie » Mi 30. Jul 2014, 22:28

The problem is the absence of service-logos.png. Can you please post a copy of your service-logos.log? It will tell me the last logo successfully built.

Benutzeravatar
mini49
gefährdete Rätselquelle
gefährdete Rätselquelle
Beiträge: 1976
Registriert: Do 9. Jun 2011, 21:06
Receivertyp: SRP-2401CI+
VU+DUO4KSE
Receiverfirmware: Jan 15 2020
Wohnort: Raum Amstetten, NÖ

AW: WebControl

#76

Beitrag von mini49 » Mi 30. Jul 2014, 22:49

I've added service-logos.log below

Thanks for your engagement
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
2x quattro LNB für Astra + Hotbird
Triax TMU983c vor Hirschmann CKR9160ND - umgestiegen auf Unicable mit 2x3 SAT-Tunern
10x VU+DUO 4K SE mit 8x DVB-S2X FBC Twin Tuner, 7x DVB-T2 Dual Tuner, 1x DVB-C FBC Tuner, 1-2 TB SSD
Image: VTI 15.0.02 Skin: Atile HD + Atlle HD pro
Plugins: vuTransferChannels | VU+Remote | AutoCutVFD | Automatic Full Backup | Automove | backsNcovers | CheckFreeSpace | Dateimanager-VTi | GithubPluginUpdater | Kiosk | InfoBarTunerState | MultiQuickButton | OpenWebif | Oscam + OscamButler | ORFSAT1Teletext | PiconManager | Serienrecorder | ServiceScanUpdates | SmartEPGvu+ | TMDb | VPS | VWeather3

Benutzeravatar
mini49
gefährdete Rätselquelle
gefährdete Rätselquelle
Beiträge: 1976
Registriert: Do 9. Jun 2011, 21:06
Receivertyp: SRP-2401CI+
VU+DUO4KSE
Receiverfirmware: Jan 15 2020
Wohnort: Raum Amstetten, NÖ

AW: WebControl

#77

Beitrag von mini49 » Mi 30. Jul 2014, 22:57

[quote="DeltaMikeCharlie"]The problem is the absence of service-logos.png. Can you please post a copy of your service-logos.log? It will tell me the last logo successfully built.[/quote]

I think it might be the best at the moment if I leave my configuration unchanged so I could do some testing for you if you would need it.

mini49
2x quattro LNB für Astra + Hotbird
Triax TMU983c vor Hirschmann CKR9160ND - umgestiegen auf Unicable mit 2x3 SAT-Tunern
10x VU+DUO 4K SE mit 8x DVB-S2X FBC Twin Tuner, 7x DVB-T2 Dual Tuner, 1x DVB-C FBC Tuner, 1-2 TB SSD
Image: VTI 15.0.02 Skin: Atile HD + Atlle HD pro
Plugins: vuTransferChannels | VU+Remote | AutoCutVFD | Automatic Full Backup | Automove | backsNcovers | CheckFreeSpace | Dateimanager-VTi | GithubPluginUpdater | Kiosk | InfoBarTunerState | MultiQuickButton | OpenWebif | Oscam + OscamButler | ORFSAT1Teletext | PiconManager | Serienrecorder | ServiceScanUpdates | SmartEPGvu+ | TMDb | VPS | VWeather3

DeltaMikeCharlie
WebController
WebController
Beiträge: 469
Registriert: Di 7. Mai 2013, 05:11
Wohnort: Australia

AW: WebControl

#78

Beitrag von DeltaMikeCharlie » Mi 30. Jul 2014, 23:17

Thanks for providing the log file, it was a big help.

I don't think that "Radio Horeb" is the problem. It was the last logo found, but there are a lot of channels searched after this one that do not have logos.

The log shows 2021 TV channels being processed and then 439 Radio channels being processed. This matches the numbers in your earlier post.

My guess is that there is a fault with the process that finally creates service-logos.png.

I will try to recreate the problem here today. Unfortunately, I only have 30 DVB-T channels so I will have to try a few things (like repeating my list 83 times) to try and force the error. If I can't force the error, I will try to produce a version of WebControl-Config with additional logging for you to use.

If you have WebControl in your AutoStart folder, please move it back into ProgramFiles so that WebControl does not interrupt your PVR. Otherwise, yes, it would be good if you could leave the current configuration for troubleshooting purposes.

Benutzeravatar
mini49
gefährdete Rätselquelle
gefährdete Rätselquelle
Beiträge: 1976
Registriert: Do 9. Jun 2011, 21:06
Receivertyp: SRP-2401CI+
VU+DUO4KSE
Receiverfirmware: Jan 15 2020
Wohnort: Raum Amstetten, NÖ

AW: WebControl

#79

Beitrag von mini49 » Mi 30. Jul 2014, 23:31

Thanks for the quick answer. I`ve eliminated WebControl from Autostart and start it manually to reproduce the problem. I´ve also done some testing with and without other TAPs. The problem is always the same. As a last point I see the creation of the Radio Horeb logo and then after a few seconds the crash happens. At least the problem ist stable and occurs every time I start WebControl.

You are always welcome in sending special debugging versions to me.

Greetings from Austria
mini49
2x quattro LNB für Astra + Hotbird
Triax TMU983c vor Hirschmann CKR9160ND - umgestiegen auf Unicable mit 2x3 SAT-Tunern
10x VU+DUO 4K SE mit 8x DVB-S2X FBC Twin Tuner, 7x DVB-T2 Dual Tuner, 1x DVB-C FBC Tuner, 1-2 TB SSD
Image: VTI 15.0.02 Skin: Atile HD + Atlle HD pro
Plugins: vuTransferChannels | VU+Remote | AutoCutVFD | Automatic Full Backup | Automove | backsNcovers | CheckFreeSpace | Dateimanager-VTi | GithubPluginUpdater | Kiosk | InfoBarTunerState | MultiQuickButton | OpenWebif | Oscam + OscamButler | ORFSAT1Teletext | PiconManager | Serienrecorder | ServiceScanUpdates | SmartEPGvu+ | TMDb | VPS | VWeather3

DeltaMikeCharlie
WebController
WebController
Beiträge: 469
Registriert: Di 7. Mai 2013, 05:11
Wohnort: Australia

AW: WebControl

#80

Beitrag von DeltaMikeCharlie » Do 31. Jul 2014, 05:02

I was able to recreate the problem on my PVR and I could reliably make my PVR crash when rebuilding logos. The problem is that you have too many channels, resulting in the potential to have too many logos. Emulating 2060 channels, my PVR was OK, with 2061 it rebooted.

Your system has 2021 TV channels + 439 Radio Channels + 4 system logos = 2464 potential logos. Rounded up to 20 logos per line, this was a maximum 2480 logos in a grid of 20 x 124 logos within your logos file even though you only actually have 822 logos found on your system.

I use an external library to create the "service-logos.png" file and it would seem that this external library has a limitation on the size of the PNG that it can produce. WebControl-Config rebooted when I passed control to this external library.

I have made 4 changes:
  1. Some additional diagnostics in "service-logos.log".
  2. I now check the actual number of logos found and only save enough PNG to cover that number rounded up to 20 logos per row.
  3. I check to see if the actual number of logos is > 2000 and if that is true, I only save the first 2000 logos found.
  4. I have added a setting into WebControl.ini that will always prevent logos from being automatically generated. Just add "noautologos=1" to the INI file and WebControl-Config will only try and build logos from the GUI, never automatically.
I have done the best to test this on my PVR, but with only 31 logos found out of 38 channels, I can only do so much testing.

You can find an updated copy of WebControl-Config here. You will need to install it on your PVR manually via FTP. It is version 1.11-Dev1 and has some minor changes ready for the next release. As far as I can remember, it should be backwards compatible with v1.10. Please let me know if you have any further troubles.

Anybody who has problems with WebControl-Config rebooting when creating logos should try this version.

Antworten

Zurück zu „SRP/CRP TAP-Bereich“