TTD Forum

Hallo!
Nach meinem erfolgreichem Firmware-Update stelle ich ein Thema mit RebulidNAV fest, kann mir bitte jemand bei folgendem weiterhelfen?
Bei jedem Start des Topfes scannt RebuildNAV immer wieder die gleichen Dateien, hier die logs/inis zu einer Aufnahme:
RebuildNAV.ini

Code: Alles auswählen

OsdX=50
OsdY=50
BarColor=ffffff00
TextColor=ffffffff
InfoKey=65559
RecCopy=1
KeepOrigin=0
AutoDescrambleTimeStart=0100
AutoDescrambleTimeEnd=0500
IgnoreCryptedPacketsStartms=5000
IgnoreCryptedPacketsms=500
ClearCopyIcon=0
ClearBlueIcon=0
RemoveOrphanedFiles=0
ScanOnlyTopDir=0
ADFCEnabled=1
ADFCMaxTries=2
ADFCMaxTimeDiff=60
ADTimerModeAuto=0
RecStripEnabled=0
RecStripStripTeletext=0
RecStripStripEPG=0
RecStripKeepSubtitles=0
Transparency=255

RebuildNAV.log

Code: Alles auswählen

2018-02-10 10:30:26 Launching RebuildNAV V7.0b
2018-02-10 10:30:26 SysID=22121(SRP-2410), Firmware=0x0111
2018-02-10 10:30:26 RecCopy mode enabled.
2018-02-10 10:30:26 AutoDescrambleTimeStart = 0100
2018-02-10 10:30:27 AutoDescrambleTimeEnd   = 0500
2018-02-10 10:30:27 ADFC enabled.
2018-02-10 10:30:27 OSD will be suppressed
2018-02-10 10:30:35 27 files found, 0 files marked for RbN processing.
2018-02-10 10:30:35 Failed to set the AD timer
2018-02-10 10:30:35 -------------------------------
2018-02-10 10:54:23 Launching RebuildNAV V7.0b
2018-02-10 10:54:23 SysID=22121(SRP-2410), Firmware=0x0111
2018-02-10 10:54:23 RecCopy mode enabled.
2018-02-10 10:54:23 AutoDescrambleTimeStart = 0100
2018-02-10 10:54:23 AutoDescrambleTimeEnd   = 0500
2018-02-10 10:54:23 ADFC enabled.
2018-02-10 10:54:23 OSD will be suppressed
2018-02-10 10:54:31 27 files found, 0 files marked for RbN processing.
2018-02-10 10:54:31 Failed to set the AD timer
2018-02-10 10:54:31 -------------------------------
2018-02-10 11:10:02 Launching RebuildNAV V7.0b
2018-02-10 11:10:02 SysID=22121(SRP-2410), Firmware=0x0111
2018-02-10 11:10:02 RecCopy mode enabled.
2018-02-10 11:10:02 AutoDescrambleTimeStart = 0100
2018-02-10 11:10:02 AutoDescrambleTimeEnd   = 0500
2018-02-10 11:10:02 ADFC enabled.
2018-02-10 11:10:02 OSD will be suppressed
2018-02-10 11:10:03 28 files found, 1 file marked for RbN processing.
2018-02-10 11:10:03 Scanne '01 /mnt/hd/DataFiles/Nachrichten.rec'
2018-02-10 11:10:03   ...192=yes, HD=yes
2018-02-10 11:10:03   ...generating HD NAV
2018-02-10 11:10:03   ...found video stream at PID 0x04ff
2018-02-10 11:10:03   ...Size=803.4 MB
2018-02-10 11:11:00 Shutdown request from user or firmware. Terminating
2018-02-10 11:11:00 RBN thread will be stopped
2018-02-10 11:13:50 Launching RebuildNAV V7.0b
2018-02-10 11:13:50 SysID=22121(SRP-2410), Firmware=0x0111
2018-02-10 11:13:50 RecCopy mode enabled.
2018-02-10 11:13:50 AutoDescrambleTimeStart = 0100
2018-02-10 11:13:50 AutoDescrambleTimeEnd   = 0500
2018-02-10 11:13:50 ADFC enabled.
2018-02-10 11:13:50 OSD will be suppressed
2018-02-10 11:13:59 28 files found, 1 file marked for RbN processing.
2018-02-10 11:13:59 Scanne '01 /mnt/hd/DataFiles/Nachrichten.rec'
2018-02-10 11:13:59   ...192=yes, HD=yes
2018-02-10 11:13:59   ...generating HD NAV
2018-02-10 11:13:59   ...found video stream at PID 0x04ff
2018-02-10 11:13:59   ...Size=803.4 MB
2018-02-10 11:15:44   ...new nav has less records than the old one (22473). Keeping the old nav.
2018-02-10 11:15:44   ...Play time: 00:14:59.840s
2018-02-10 11:15:44   ...Processed packets: 3563724, 652.5 MB, 372 MB/min, Ratio=8.6x
2018-02-10 11:15:44   ...Unprocessed packets: 823793, 150.8 MB
2018-02-10 11:15:44 Failed to set the AD timer
2018-02-10 11:15:49 -------------------------------
2018-02-10 11:36:23 Launching RebuildNAV V7.0b
2018-02-10 11:36:23 SysID=22121(SRP-2410), Firmware=0x0111
2018-02-10 11:36:23 RecCopy mode enabled.
2018-02-10 11:36:23 AutoDescrambleTimeStart = 0100
2018-02-10 11:36:23 AutoDescrambleTimeEnd   = 0500
2018-02-10 11:36:23 ADFC enabled.
2018-02-10 11:36:24 OSD will be suppressed
2018-02-10 11:36:32 28 files found, 1 file marked for RbN processing.
2018-02-10 11:36:32 Scanne '01 /mnt/hd/DataFiles/Nachrichten.rec'
2018-02-10 11:36:32   ...192=yes, HD=yes
2018-02-10 11:36:32   ...generating HD NAV
2018-02-10 11:36:32   ...found video stream at PID 0x04ff
2018-02-10 11:36:32   ...Size=803.4 MB
2018-02-10 11:37:57   ...new nav has less records than the old one (22473). Keeping the old nav.
2018-02-10 11:37:58   ...Play time: 00:14:59.840s
2018-02-10 11:37:58   ...Processed packets: 3563724, 652.5 MB, 460 MB/min, Ratio=10.6x
2018-02-10 11:37:58   ...Unprocessed packets: 823793, 150.8 MB
2018-02-10 11:37:58 Failed to set the AD timer
2018-02-10 11:38:03 -------------------------------

SmartEPG_TMS.log

Code: Alles auswählen

2018-02-10 10:30:27 ===================================================
2018-02-10 10:30:27 SmartEPG_TMS  V7.3a
2018-02-10 10:30:27 SysID=22121(SRP-2410), Firmware=TF-TEST 1.11.77 (Mar  5 2014) (0x0111), Rec=.rec
2018-02-10 10:30:27 TimeZone = 60 min 
2018-02-10 10:30:27 System type: TMS DVBs
2018-02-10 10:30:27 RemoteType: 2100
2018-02-10 10:30:31 EventDBCache: '/mnt/hd/ProgramFiles/Settings/SmartEPG_TMS/EPGDB/EDBC_LiveEPG.tmp' created successfully
2018-02-10 10:30:31 CamState: APPL_STATE_Ci = 0x19
2018-02-10 10:30:31 CamState: using CI mode
2018-02-10 10:30:31 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2018-02-10 10:30:33 ScanTimerMonitor: ScanTimer has been set to 2018-02-11 05:29
2018-02-10 10:30:33 LogoManager: 8 cache records have been loaded
2018-02-10 10:30:33 IQT: Load IQTuner Settings
2018-02-10 10:30:33 Startreason: User
2018-02-10 10:30:33 Tuner 2 connection type is "Loop through"
2018-02-10 10:30:34 Check if channel lists of Tuner 1 and Tuner 2 are matching
2018-02-10 10:30:34 Checking channel list for 840 TV-Channels
2018-02-10 10:30:34 Checking channel list for 178 Radio-Channels
2018-02-10 10:30:34 Channel lists of Tuner 1 and Tuner 2 are matching
2018-02-10 10:30:34 Searching for RebuildNAV/RecCopy
2018-02-10 10:30:34 RbN found at '/ProgramFiles/AutoStart/RebuildNAV.tap'
2018-02-10 10:30:44 Check for conflict TAPs
2018-02-10 10:31:32 sizeof(TYPE_EvtInfo) seems to be 68 bytes
2018-02-10 10:32:36 SearchDB: number of search entries is 0
2018-02-10 10:32:36 SearchDB: number of search entries is 0
2018-02-10 10:33:11 TimerDB: new timer '01 'Nachrichten' (2018-02-10 11:00/10') (R=0b91, V=0000)' has been added to the DB
2018-02-10 10:33:11 AutoDescramble: failed to resolve the AD timer structures
2018-02-10 10:33:11 TimerDB: programmed '00 'Nachrichten' (2018-02-10 11:00/10') (R=0b91, V=0000)' at tuner 1 on station 'n-tv HD', slot 0
2018-02-10 10:33:12 ScanTimer: last successful scan  @ 2018-02-10 05:44
2018-02-10 10:33:12 ScanTimer: next start slot       @ 2018-02-11 05:30
2018-02-10 10:33:12 TimerDB: deleting DB timer '01 'SmartEPG' (2018-02-11 05:30/2') (R=fedc, V=0000)'
2018-02-10 10:33:12 ScanTimer: slot needs to be      @ 30 minutes
2018-02-10 10:33:12 ScanTimer: timer has been set to @ 2018-02-11 05:30
2018-02-10 10:33:12 FlashTimerDebug: difference found @ 'Exit'
2018-02-10 10:33:13 Timers changed, force new check for starting timers
2018-02-10 10:33:26 TimerDB: programmed '00 'Nachrichten' (2018-02-10 11:00/10') (R=0b91, V=0000)' at tuner 1 on station 'n-tv HD', slot 0
2018-02-10 10:33:26 ScanTimer: last successful scan  @ 2018-02-10 05:44
2018-02-10 10:33:26 ScanTimer: next start slot       @ 2018-02-11 05:30
2018-02-10 10:33:26 TimerDB: deleting DB timer '01 'SmartEPG' (2018-02-11 05:30/2') (R=fedc, V=0000)'
2018-02-10 10:33:26 ScanTimer: slot needs to be      @ 30 minutes
2018-02-10 10:33:26 ScanTimer: timer has been set to @ 2018-02-11 05:30
2018-02-10 10:33:26 FlashTimerDebug: difference found @ 'Exit'
2018-02-10 10:33:38 ScanTimer: last successful scan  @ 2018-02-10 05:44
2018-02-10 10:33:38 ScanTimer: next start slot       @ 2018-02-11 05:30
2018-02-10 10:33:38 TimerDB: deleting DB timer '01 'SmartEPG' (2018-02-11 05:30/2') (R=fedc, V=0000)'
2018-02-10 10:33:38 ScanTimer: slot needs to be      @ 30 minutes
2018-02-10 10:33:38 ScanTimer: timer has been set to @ 2018-02-11 05:30
2018-02-10 10:33:38 EventDBCache: '/mnt/hd/ProgramFiles/Settings/SmartEPG_TMS/EPGDB/EDBC_LiveEPG.tmp' has been destroyed
2018-02-10 10:33:38 SE shutdown finished
2018-02-10 10:54:23 ===================================================
2018-02-10 10:54:23 SmartEPG_TMS  V7.3a
2018-02-10 10:54:23 SysID=22121(SRP-2410), Firmware=TF-TEST 1.11.77 (Mar  5 2014) (0x0111), Rec=.rec
2018-02-10 10:54:23 TimeZone = 60 min 
2018-02-10 10:54:23 System type: TMS DVBs
2018-02-10 10:54:23 RemoteType: 2100
2018-02-10 10:54:27 EventDBCache: '/mnt/hd/ProgramFiles/Settings/SmartEPG_TMS/EPGDB/EDBC_LiveEPG.tmp' created successfully
2018-02-10 10:54:27 LiveEPG: channel change. Timeout = 60s
2018-02-10 10:54:27 CamState: APPL_STATE_Ci = 0x19
2018-02-10 10:54:27 CamState: using CI mode
2018-02-10 10:54:27 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2018-02-10 10:54:29 ScanTimerMonitor: ScanTimer has been set to 2018-02-11 05:29
2018-02-10 10:54:29 LogoManager: 8 cache records have been loaded
2018-02-10 10:54:29 IQT: Load IQTuner Settings
2018-02-10 10:54:29 Startreason: Timer
2018-02-10 10:54:29 Tuner 2 connection type is "Loop through"
2018-02-10 10:54:29 Check if channel lists of Tuner 1 and Tuner 2 are matching
2018-02-10 10:54:29 Checking channel list for 840 TV-Channels
2018-02-10 10:54:29 Checking channel list for 178 Radio-Channels
2018-02-10 10:54:29 Channel lists of Tuner 1 and Tuner 2 are matching
2018-02-10 10:54:29 Searching for RebuildNAV/RecCopy
2018-02-10 10:54:30 RbN found at '/ProgramFiles/AutoStart/RebuildNAV.tap'
2018-02-10 10:54:30 --------------------
2018-02-10 10:54:30 Modify Timer 0 to Tuner 4
2018-02-10 10:54:30 Name: Nachrichten.rec
2018-02-10 10:54:30 Channel: n-tv HD
2018-02-10 10:54:30 StartTime: 10:55
2018-02-10 10:54:30 EndTime: 11:10
2018-02-10 10:54:30 Timer 0 is scheduled within 1 minute
2018-02-10 10:54:30 -------------------------------------------------------------------------------
2018-02-10 10:54:30 Processing timer 0
2018-02-10 10:54:30 Channel: n-tv HD (11)
2018-02-10 10:54:30 Name: Nachrichten.rec
2018-02-10 10:54:30 Type: TV
2018-02-10 10:54:30 Reservation Type: Recording (R)
2018-02-10 10:54:30 Frequency: 10832MHz
2018-02-10 10:54:30 Level: HL
2018-02-10 10:54:30 --------------------
2018-02-10 10:54:30 LiveTuner: 1
2018-02-10 10:54:30 LiveChannel: n-tv HD (11)
2018-02-10 10:54:30 LiveType: TV
2018-02-10 10:54:30 LiveService: Crypted
2018-02-10 10:54:30 LiveFreq: 10832MHz / LiveIDx: 1
2018-02-10 10:54:30 LiveLevel: HL
2018-02-10 10:54:30 --------------------
2018-02-10 10:54:30 TOneFreq: 00000MHz / TOneIDx: 0
2018-02-10 10:54:30 TTwoFreq: 00000MHz / TTwoIDx: 0
2018-02-10 10:54:30 RecFreq:  10832MHz / RecIDx:  1
2018-02-10 10:54:30 RecLevel: HL
2018-02-10 10:54:30 Livechannel changed to TV-Channel n-tv HD (11) on Tuner 1
2018-02-10 10:54:30 (Case 2): Modify Timer to Tuner 1 (Live Tuner)
2018-02-10 10:54:30 Timermodification successfully completed
2018-02-10 10:54:30 -------------------------------------------------------------------------------
2018-02-10 10:54:40 Check for conflict TAPs
2018-02-10 10:55:00 FlashTimerDebug: difference found @ 'Entry'
2018-02-10 10:55:01 TimerDB: infCache size calculated as 1412 bytes
2018-02-10 10:55:01 Recording of "Nachrichten.rec" started
2018-02-10 10:55:01 Check for crypt flag: Recording is started descrambled
2018-02-10 10:55:01 Descrambled recording by parameter activated for recording slot 1
2018-02-10 10:55:16 Descrambled recording by parameter is running descrambled
2018-02-10 10:55:33 sizeof(TYPE_EvtInfo) seems to be 68 bytes
2018-02-10 10:56:41 SearchDB: number of search entries is 0
2018-02-10 10:56:41 SearchDB: number of search entries is 0
2018-02-10 11:03:02 SearchDB: number of search entries is 0
2018-02-10 11:03:02 SearchDB: number of search entries is 0
2018-02-10 11:09:21 SearchDB: number of search entries is 0
2018-02-10 11:09:21 SearchDB: number of search entries is 0
2018-02-10 11:10:01 TimerDB: removed old timer '00 'Nachrichten' (2018-02-10 11:00/10') (R=0b91, V=0000)'
2018-02-10 11:10:01 Recording of "Nachrichten.rec" stopped
2018-02-10 11:10:01 Descrambled recording by parameter on slot 1 stopped
2018-02-10 11:10:01 Check if recording Nachrichten.rec is descrambled
2018-02-10 11:10:02 AutoDescramble: failed to resolve the AD timer structures
2018-02-10 11:10:02 ScanTimer: last successful scan  @ 2018-02-10 05:44
2018-02-10 11:10:02 ScanTimer: next start slot       @ 2018-02-11 05:30
2018-02-10 11:10:02 TimerDB: deleting DB timer '00 'SmartEPG' (2018-02-11 05:30/2') (R=fedc, V=0000)'
2018-02-10 11:10:02 ScanTimer: slot needs to be      @ 30 minutes
2018-02-10 11:10:02 ScanTimer: timer has been set to @ 2018-02-11 05:30
2018-02-10 11:10:02 Recording is from scrambled channel
2018-02-10 11:10:02 Recording is marked as: Descrambled
2018-02-10 11:10:02 RecCopy will be started
2018-02-10 11:10:02 Move into Folder /ProgramFiles/AutoStart
2018-02-10 11:10:02 Starting RebuildNAV.tap
2018-02-10 11:10:02 End of a recording detected
2018-02-10 11:11:00 ScanTimer: last successful scan  @ 2018-02-10 05:44
2018-02-10 11:11:00 ScanTimer: next start slot       @ 2018-02-11 05:30
2018-02-10 11:11:00 TimerDB: deleting DB timer '00 'SmartEPG' (2018-02-11 05:30/2') (R=fedc, V=0000)'
2018-02-10 11:11:00 ScanTimer: slot needs to be      @ 30 minutes
2018-02-10 11:11:00 ScanTimer: timer has been set to @ 2018-02-11 05:30
2018-02-10 11:11:00 EventDBCache: '/mnt/hd/ProgramFiles/Settings/SmartEPG_TMS/EPGDB/EDBC_LiveEPG.tmp' has been destroyed
2018-02-10 11:11:01 SE shutdown finished
2018-02-10 11:13:51 ===================================================
2018-02-10 11:13:51 SmartEPG_TMS  V7.3a
2018-02-10 11:13:51 SysID=22121(SRP-2410), Firmware=TF-TEST 1.11.77 (Mar  5 2014) (0x0111), Rec=.rec
2018-02-10 11:13:51 TimeZone = 60 min 
2018-02-10 11:13:51 System type: TMS DVBs
2018-02-10 11:13:51 RemoteType: 2100
2018-02-10 11:13:55 EventDBCache: '/mnt/hd/ProgramFiles/Settings/SmartEPG_TMS/EPGDB/EDBC_LiveEPG.tmp' created successfully
2018-02-10 11:13:55 CamState: APPL_STATE_Ci = 0x19
2018-02-10 11:13:55 CamState: using CI mode
2018-02-10 11:13:55 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2018-02-10 11:13:57 ScanTimerMonitor: ScanTimer has been set to 2018-02-11 05:29
2018-02-10 11:13:57 LogoManager: 8 cache records have been loaded
2018-02-10 11:13:57 IQT: Load IQTuner Settings
2018-02-10 11:13:57 Startreason: User
2018-02-10 11:13:57 Tuner 2 connection type is "Loop through"
2018-02-10 11:13:58 Check if channel lists of Tuner 1 and Tuner 2 are matching
2018-02-10 11:13:58 Checking channel list for 840 TV-Channels
2018-02-10 11:13:58 Checking channel list for 178 Radio-Channels
2018-02-10 11:13:58 Channel lists of Tuner 1 and Tuner 2 are matching
2018-02-10 11:13:58 Searching for RebuildNAV/RecCopy
2018-02-10 11:13:58 RbN found at '/ProgramFiles/AutoStart/RebuildNAV.tap'
2018-02-10 11:14:08 Check for conflict TAPs
2018-02-10 11:16:48 sizeof(TYPE_EvtInfo) seems to be 68 bytes
2018-02-10 11:17:56 SearchDB: number of search entries is 0
2018-02-10 11:17:56 SearchDB: number of search entries is 0
2018-02-10 11:19:57 ScanTimer: last successful scan  @ 2018-02-10 05:44
2018-02-10 11:19:57 ScanTimer: next start slot       @ 2018-02-11 05:30
2018-02-10 11:19:57 TimerDB: deleting DB timer '00 'SmartEPG' (2018-02-11 05:30/2') (R=fedc, V=0000)'
2018-02-10 11:19:57 ScanTimer: slot needs to be      @ 30 minutes
2018-02-10 11:19:57 ScanTimer: timer has been set to @ 2018-02-11 05:30
2018-02-10 11:19:57 EventDBCache: '/mnt/hd/ProgramFiles/Settings/SmartEPG_TMS/EPGDB/EDBC_LiveEPG.tmp' has been destroyed
2018-02-10 11:19:57 SE shutdown finished
2018-02-10 11:36:24 ===================================================
2018-02-10 11:36:24 SmartEPG_TMS  V7.3a
2018-02-10 11:36:24 SysID=22121(SRP-2410), Firmware=TF-TEST 1.11.77 (Mar  5 2014) (0x0111), Rec=.rec
2018-02-10 11:36:24 TimeZone = 60 min 
2018-02-10 11:36:24 System type: TMS DVBs
2018-02-10 11:36:24 RemoteType: 2100
2018-02-10 11:36:28 EventDBCache: '/mnt/hd/ProgramFiles/Settings/SmartEPG_TMS/EPGDB/EDBC_LiveEPG.tmp' created successfully
2018-02-10 11:36:28 CamState: APPL_STATE_Ci = 0x19
2018-02-10 11:36:28 CamState: using CI mode
2018-02-10 11:36:28 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2018-02-10 11:36:30 ScanTimerMonitor: ScanTimer has been set to 2018-02-11 05:29
2018-02-10 11:36:30 LogoManager: 8 cache records have been loaded
2018-02-10 11:36:30 IQT: Load IQTuner Settings
2018-02-10 11:36:30 Startreason: User
2018-02-10 11:36:30 Tuner 2 connection type is "Loop through"
2018-02-10 11:36:31 Check if channel lists of Tuner 1 and Tuner 2 are matching
2018-02-10 11:36:31 Checking channel list for 840 TV-Channels
2018-02-10 11:36:31 Checking channel list for 178 Radio-Channels
2018-02-10 11:36:31 Channel lists of Tuner 1 and Tuner 2 are matching
2018-02-10 11:36:31 Searching for RebuildNAV/RecCopy
2018-02-10 11:36:31 RbN found at '/ProgramFiles/AutoStart/RebuildNAV.tap'
2018-02-10 11:36:41 Check for conflict TAPs
2018-02-10 11:39:03 sizeof(TYPE_EvtInfo) seems to be 68 bytes

Ein Hinweis könnten die beiden Einträge sein?
RebuildNAV.log

Code: Alles auswählen

Failed to set the AD timer

SmartEPG_TMS.log

Code: Alles auswählen

AutoDescramble: failed to resolve the AD timer structures

Kann ich das fixen?

Vielen Dank!

es dürfte noch einen bug geben, daß wenn die alte nav länger ist als die neue, das file nicht als abgearbeitet markiert wird:

2018-02-10 11:15:44 ...new nav has less records than the old one (22473). Keeping the old nav.

firebird hat das aber schon in der pipeline

twilight

Kann er als Workaround die nav(s) nicht löschen ? Damit das gescanne aufhört

das, oder die files in ein unterverzeichnis verschieben und untervezeichnisse vo scan ausnehmen.

es hat ja einen grund warum solche navs nicht gelöscht/ersetzt werden: wenn die alten größer als die neuen sind, steht eventuell doch was drin was noch nicht erforscht wurde...

twilight

Oder so halt

bin zurück auf die Version 6, so gehts auch

allerdings fiel mir auf, das verschlüsselte Aufnahmen in den AD-Ordner verschoben werden, aber kein Timer für die Entschlüsselung angelegt wird. Lt log wurde das auch bestätigt

Code: Alles auswählen

Failed to set the AD timer

hab nun Smartdecrypter installiert und von Firmware aus smartdecrypter umgestellt, so gehts!

besten Dank für eure Hilfe!
cu,
matthias

das war auch der korrekte weg...du hast offensichtlich eine firmware installiert die den ad timer nicht mehr unterstützt.

solltest aber noch kontrollieren ob die firmware eigene entschlüsselung deaktiviert ist

twilight

TTD Forum

RebuildNAV scannt immer wieder Aufnahmen

RebuildNAV scannt immer wieder Aufnahmen

Re: RebuildNAV scannt immer wieder Aufnahmen

Re: RebuildNAV scannt immer wieder Aufnahmen

Re: RebuildNAV scannt immer wieder Aufnahmen

Re: RebuildNAV scannt immer wieder Aufnahmen

Re: RebuildNAV scannt immer wieder Aufnahmen

Re: RebuildNAV scannt immer wieder Aufnahmen