Topf wird kommisch nach Festplatte wechsel

Allgemeines und Neues zum Thema CRP-2401CI+
3rensho
Topfazubi
Topfazubi
Beiträge: 43
Registriert: Di 29. Jan 2013, 17:25

Topf wird kommisch nach Festplatte wechsel

#1

Beitrag von 3rensho » Mi 4. Apr 2018, 09:29

Mein Topf ist seit lange einwandfrei gelaufen. Neulich habe ich die Meldung "harddisk not found" erhalten. Habe alle kabel kontrolliert und war in ordnung. Habe eine neue 1TB Platte installiert und formatiert. Jetzt spielt er kommisch und zwar reagiert nur langsam zu Fernbedienung und die Taps laufen nicht richtig. Nach internet Forschung habe ich entdeckt dass in der Zwischenzeit die Topfield Firma ist kaput gegangen and ich habe zum gluck diese Forum entdeckt. Ich habe heute morgen die neuste firmware von 2014 neu installiert und das hat mit dem langsam reagierienzeit geholfen. Hier habe ich gelesen dass ich soll die neue TaptoDate installieren. Habe via telnet die alte gelöscht und die neue von hier mit Filezilla installiert und gestartet. Ich kriege eine neue Tapliste und TaptoDate steht als "new". Versuche zu installieren aber sehe nur "Download Failed". Dann schaue ich in telnet session und sehe -

# 2018-04-04 08:53:01 TAPtoDate Setup: Launching TAPtoDate Setup V2.1
2018-04-04 08:53:01 TAPtoDate Setup: SysID=42031, Firmware=0x0104
2018-04-04 08:53:01 TAPtoDate Setup: No parameter provided, using IT_Install
2018-04-04 08:53:01 TAPtoDate Setup: IT_Install step 0
2018-04-04 08:53:01 TAPtoDate Setup: IT_Install step 1
2018-04-04 08:53:02 TAPtoDate Setup: IT_Install step 2
2018-04-04 08:53:06 TAPtoDate Setup: Selected AutoStartMode = 1
2018-04-04 08:53:06 TAPtoDate Setup: IT_Install step 3
2018-04-04 08:53:06 TAPtoDate: TAP 0x8e0a4236 is not running
2018-04-04 08:53:06 TAPtoDate Setup: IT_Install step 4
2018-04-04 08:53:06 TAPtoDate Setup: IT_Install step 5
2018-04-04 08:53:07 TAPtoDate Setup: IT_Install step 6
2018-04-04 08:53:07 TAPtoDate Setup: Installing TAP to /ProgramFiles/AutoStart/TAPtoDate.tap
2018-04-04 08:53:07 TAPtoDate Setup: IT_Install step 7
2018-04-04 08:53:07 TAPtoDate Setup: IT_Install step 8
2018-04-04 08:53:07 TAPtoDate: Launching TAPtoDate V2.1
2018-04-04 08:53:07 TAPtoDate: SysID=42031, Firmware=0x0104
2018-04-04 08:53:07 TAPtoDate: Dir=/ProgramFiles/AutoStart, Uptime=389717
2018-04-04 08:53:07 TAPtoDate: ST_Init
2018-04-04 08:53:08 TAPtoDate: Startup delay = 10 seconds
2018-04-04 08:53:08 TAPtoDate: eth0 Link encap:Ethernet HWaddr 00:0E:9E:05:47:21
2018-04-04 08:53:08 TAPtoDate: inet addr:192.168.1.110 Bcast:192.168.1.255 Mask:255.255.255.0
2018-04-04 08:53:08 TAPtoDate: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
2018-04-04 08:53:08 TAPtoDate: RX packets:16458 errors:0 dropped:0 overruns:0 frame:0
2018-04-04 08:53:08 TAPtoDate: TX packets:8301 errors:0 dropped:0 overruns:0 carrier:0
2018-04-04 08:53:08 TAPtoDate: collisions:0 txqueuelen:1000
2018-04-04 08:53:08 TAPtoDate: Interrupt:16
2018-04-04 08:53:08 TAPtoDate:
2018-04-04 08:53:08 TAPtoDate: nameserver 8.8.8.8
2018-04-04 08:53:08 TAPtoDate: nameserver 8.8.4.4
2018-04-04 08:53:08 TAPtoDate: MS_Inactive
2018-04-04 08:53:11 TAPtoDate Setup: IT_Install step 9
2018-04-04 08:53:11 TAPtoDate: ST_QueryServer
2018-04-04 08:53:11 TAPtoDate: Download thread started
2018-04-04 08:53:11 TAPtoDate: Download queue 0 = 'http://ttd.tms-taps.net/taptodate.php?type=get'
2018-04-04 08:53:11 TAPtoDate: ST_WaitMasterList
2018-04-04 08:53:27 TAPtoDate: Download queue 0 finished after 1523 ticks. ExitCode = 'Network failure' (400)
2018-04-04 08:53:27 TAPtoDate: Download thread stopped
2018-04-04 08:53:32 TAPtoDate: File size of '37630001.ttd' is zero
2018-04-04 08:53:32 TAPtoDate: Download thread started
2018-04-04 08:53:32 TAPtoDate: Download queue 0 = 'http://werbung.miga-spielzeug.de/Toeppi ... 630001.ttd'
2018-04-04 08:53:32 TAPtoDate: Reason: TTDLoad() failed, file may be damaged
2018-04-04 08:53:34 TAPtoDate: ST_WaitTTDs
2018-04-04 08:53:48 TAPtoDate: Download queue 0 finished after 1557 ticks. ExitCode = 'Network failure' (400)
2018-04-04 08:53:48 TAPtoDate: Download thread stopped
2018-04-04 08:53:48 TAPtoDate: ST_CheckVisibility
2018-04-04 08:53:48 TAPtoDate: TOB: TAPtoDate.tap has been updated (8e0a4236) (1522831440 vs. 1522831980)
2018-04-04 08:53:48 TAPtoDate: TOB: TAPtoDate.tap (8e0a4236) changed AutoStart mode to on
2018-04-04 08:53:54 TAPtoDate: File size of '37630001.ttd' is zero
2018-04-04 08:53:55 TAPtoDate: 513 TAP versions in TAPCache
2018-04-04 08:53:55 TAPtoDate: MS_Overview
2018-04-04 08:53:56 TAPtoDate: ST_Idle
2018-04-04 08:54:03 TAPtoDate: MS_VersionList: 'TAPtoDate'
2018-04-04 08:54:04 TAPtoDate: MS_Tasks
2018-04-04 08:54:08 TAPtoDate: IT_InstallSelf step 0
2018-04-04 08:54:08 TAPtoDate: Download thread started
2018-04-04 08:54:08 TAPtoDate: Download queue 0 = 'http://www.topfield.cc/files/Firebird/T ... 174847.tgz'
2018-04-04 08:54:08 TAPtoDate: IT_InstallSelf step 1
2018-04-04 08:54:23 TAPtoDate: Download queue 0 finished after 1516 ticks. ExitCode = 'Network failure' (400)
2018-04-04 08:54:23 TAPtoDate: Download thread stopped
2018-04-04 08:54:23 TAPtoDate: Sending ERROR message
2018-04-04 08:54:23 TAPtoDate: Download thread started
2018-04-04 08:54:23 TAPtoDate: Download queue 0 = 'http://ttd.tms-taps.net/taptodate.php?t ... 36&error=1'
2018-04-04 08:54:25 TAPtoDate: MS_VersionList: 'TAPtoDate'
2018-04-04 08:54:34 TAPtoDate: MS_Overview
2018-04-04 08:54:35 TAPtoDate: MS_Inactive

Die "Network failure" Meldung. Kann jemand mir vieleicht sagen was schief gelaufen ist?? im moment bin ich clueless. Danke im Voraus.

Benutzeravatar
FireBird
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Beiträge: 28750
Registriert: Fr 9. Dez 2005, 09:59
Receivertyp: SRP-2401CI+ TFIR
vu+ Duo 4k
Wohnort: Wien

Re: Topf wird kommisch nach Festplatte wechsel

#2

Beitrag von FireBird » Mi 4. Apr 2018, 11:31

Probiere bitte einmal den hier erwähnten Installer.

3rensho
Topfazubi
Topfazubi
Beiträge: 43
Registriert: Di 29. Jan 2013, 17:25

Re: Topf wird kommisch nach Festplatte wechsel

#3

Beitrag von 3rensho » Mi 4. Apr 2018, 12:51

FireBird, vielen Dank für Dein Antwort. Ich habe mein Topf wieder eingeschaltet und gleichzeitig eine telnet verbindung gemacht. Erstaunlicherweise habe ich beobachtet das TapToDate hat wieder installiert und diesmal richtig, d.h. kein Network Errors. Nachher sehe ich viele neue Versionen von TAPs. Vielen Dank nochmals.

Antworten

Zurück zu „CRP-2401CI+ Allgemeines“