Hi,
Since the 21 january, CanalSat France have made some modification in their conditionnal access table (12 to 28 entries), this disable the successfull recording for an crypted channel while viewing another (on the same transpondeur or another using the 2 tuners)
The Topfield doesnt record all informations needed for the future decryption.
I have TF6000PVR, but I known many owner of TF5000, TF4000, TF6000 and TF7700HD PVR series who have the same problem.
I think that the hiden goal is to push the location of their proprietary receivers.
All Topfield PVR have problem in France
All Topfield PVR have problem in France
Zuletzt geändert von DaDag am Sa 9. Feb 2008, 03:33, insgesamt 1-mal geändert.
AW: All Topfield PVR have problem in France
[quote=""DaDag""]Hi,
I think that the hiden goal is to push the location of their proprietary receivers.[/quote]
Hi, I do not understand your last sentence, can you rephrase please...
Did you directly forward the problem to TF Korea?
wolke7
I think that the hiden goal is to push the location of their proprietary receivers.[/quote]
Hi, I do not understand your last sentence, can you rephrase please...
Did you directly forward the problem to TF Korea?
wolke7
- Bonni
- Guru in perpetuum
- Beiträge: 8201
- Registriert: Fr 9. Dez 2005, 18:37
- Wohnort: Hamm (Westf.)
- Receivertyp: TF5000 / TF5000CI / SRP-2401 CI+ eco
- Receiverfirmware: 03.01.2007PH / ? / TF-BPCE 1.03.00
- Wohnort: Hamm (Westf.)
AW: All Topfield PVR have problem in France
[quote=""wolke7""]Hi, I do not understand your last sentence, can you rephrase please...[/quote]
It means:
"Sie wollen, dass man Ihre proprietären Receiver benutzt anstatt Topfield o.ä.".
Although I've never heard that Topfield evaluates CAT. I think it's a problem of the CI module. Which one is it?
And I would first - if at all - contact the Topfield Support in Cologne instead of Korea.
It means:
"Sie wollen, dass man Ihre proprietären Receiver benutzt anstatt Topfield o.ä.".
Although I've never heard that Topfield evaluates CAT. I think it's a problem of the CI module. Which one is it?
And I would first - if at all - contact the Topfield Support in Cologne instead of Korea.
Gruß Bonni
90cm-Schüssel + 2 Quattro LNB + TELEKA SAM 2294N Multiswitch 9:4 (seit 08/1998!)
TF5000PVR (seit 09/2003) mit USB Accelerator, ImproBox, PowerRestore, iTiNa - läuft wie am ersten Tag!
TF5000CI (seit 06/2005)
SRP-2401 CI+ Eco (10/2017-06/2020) mit SmartEPG_TMS, TAPtoDate, WebControl, etc.
VU+ Ultimo 4k (seit 05/2020) mit SmartEPGvu+ und AutoTimer
90cm-Schüssel + 2 Quattro LNB + TELEKA SAM 2294N Multiswitch 9:4 (seit 08/1998!)
TF5000PVR (seit 09/2003) mit USB Accelerator, ImproBox, PowerRestore, iTiNa - läuft wie am ersten Tag!
TF5000CI (seit 06/2005)
SRP-2401 CI+ Eco (10/2017-06/2020) mit SmartEPG_TMS, TAPtoDate, WebControl, etc.
VU+ Ultimo 4k (seit 05/2020) mit SmartEPGvu+ und AutoTimer
- Gerti
- Nicht mehr bei Topfield-Europe
- Beiträge: 15740
- Registriert: Fr 9. Dez 2005, 00:16
- Receivertyp: Vu+ Uno 4k
- Wohnort: Hürth
- Kontaktdaten:
AW: All Topfield PVR have problem in France
Hi!
We know about the problem, but we didn't get any cards from the french TV Stations or even an answer to our requests to check this.
Best regards,
Michael
We know about the problem, but we didn't get any cards from the french TV Stations or even an answer to our requests to check this.
Best regards,
Michael
AW: All Topfield PVR have problem in France
Problem solved since 10 days for all PVR in some new beta firmwares directly from Korea, now all (12+) ECM PID are recorded, before only 4 recorded because an strange ECM duplicated for the same Prov-ID as card.
No card is needed for this, juste capture full transport stream from satellite and comparing CA_descriptor with a simple channel record.
No card is needed for this, juste capture full transport stream from satellite and comparing CA_descriptor with a simple channel record.
Zuletzt geändert von DaDag am Mo 10. Mär 2008, 01:36, insgesamt 1-mal geändert.