Have a problem in the LNB configuration meny after loading to the receiver firmware or new lists. On the line where you can choose between loop through or direct there is an other choice when I just look for the first time after loading firmware or new channel lists. It always is named "sort". When using arrows left or right the direct or loop through choice appears and then you never see the choice "sort" again before you eventually are loading a new firmware or anything. What is that? Never noticed that before and thats why I want to try resetting the Topfield to see if that will be affected.
At the same time this has appeared it is not possible to make the tuner 2 work with a V-Box because nomatter what index you have on a satellite it will always be indexed by the Topfield to 4 or 5 or 7. First time you save = 4, next time same satellite = 5 or 7.
Even if it in the satelliteconfiguration in Vega or SetEdit are indexed as 18.
Anyone have an idea of what is wrong? It wont help reload the firmware though I have tried that.
Thanks in advance
