Firmware SRP-2100 (04.04.2014)

Allgemeines und Neues zum Thema SRP-2100
Benutzeravatar
FireBird
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Beiträge: 28745
Registriert: Fr 9. Dez 2005, 09:59
Receivertyp: SRP-2401CI+ TFIR
vu+ Duo 4k
Wohnort: Wien

AW: Firmware SRP-2100 (04.04.2014)

#741

Beitrag von FireBird » Do 12. Mai 2016, 12:33

Sorry but this German translation doesn't make any sense.

Benutzeravatar
Twilight
Zauberküchencheflehrling mit extra Butter
Zauberküchencheflehrling mit extra Butter
Beiträge: 64737
Registriert: Fr 9. Dez 2005, 09:17
Receivertyp: 1 x SRP 2100(TMS) TFIR und .1 x SRP 2410 M
Wohnort: Wien Umgebung

AW: Firmware SRP-2100 (04.04.2014)

#742

Beitrag von Twilight » Do 12. Mai 2016, 13:00

:rotfl: why you don't you ask in english?

twilight

geodoc
Vielfrager
Vielfrager
Beiträge: 14
Registriert: Do 1. Dez 2011, 11:04

AW: Firmware SRP-2100 (04.04.2014)

#743

Beitrag von geodoc » Do 12. Mai 2016, 23:27

Ich habe HxD hex Editor ein ID-22010 ein 22110 Dank übergeben Ich habe HxD hex Editor ein ID-22010 ein 22110 Dank übergeben

geodoc
Vielfrager
Vielfrager
Beiträge: 14
Registriert: Do 1. Dez 2011, 11:04

AW: Firmware SRP-2100 (04.04.2014)

#744

Beitrag von geodoc » Do 12. Mai 2016, 23:34

Updates does not work because I have an ID 22110 and I have no reception for channels in Belgium despite several request without response to Topfield I can use TMS and it trailed in a cupboard I guess that there must be a firmware that could rectify the problem but which I'm limited with the version for the 22110 I HxD hex editor like to pass an ID a 22010, 22110 Fine thanks

Benutzeravatar
Sirius
Vollzeit-Guru
Vollzeit-Guru
Beiträge: 2429
Registriert: So 8. Apr 2007, 10:05
Receivertyp: SRP-2100(TMS) / TF5500
Receiverfirmware: 08.Apr.2014 / 22.Dez.2011 PHUD
Wohnort: Hessen

AW: Firmware SRP-2100 (04.04.2014)

#745

Beitrag von Sirius » Sa 14. Mai 2016, 11:23

FireBird hat geschrieben:It is possible but you also need to recalculate the checksum of the header of the file, which makes it not trivial. If you know how to handle a hex editor and post the first 10 bytes of the .tfd file, I can post these 10 bytes for the 22110.

Is this the information you asked for?
The System-ID seemed to be in byte 5. + 6 (04 +05)., but which bytes are for the checksum?

Code: Alles auswählen

00 08 8A 55 [color=Green]55 FA[/color] 00 64 01 31  => SRP-2100_[color=Green]22010[/color]-2014Apr10.tfd
00 08 8A 55 [color=Green]55 FA[/color] 00 64 01 31  => SRP-2100_[color=Green]22010[/color]-04042014.tfd
00 08 8B 15 [color=Green]55 FA[/color] 00 64 01 32  => SRP-2100_[color=Green]22010[/color]-v115_2013.08.13_WithPRE.tfd
00 08 42 14 [color=Green]55 FA[/color] 00 64 01 2E  => SRP-2100_[color=Green]22010[/color]-2012Mar23.tfd


00 08 7A 64 [color=Red]56 5E[/color] 00 64 01 16  => SRP-2100([color=Red]EU_22110[/color])-2012Apr17_v1.07.01_Dev.tfd
00 08 AB 65 [color=Red]56 5E[/color] 00 64 00 EA  => SRP-2100_[color=Red]22110[/color]-2009Apr17.tfd
Zuletzt geändert von Sirius am Sa 14. Mai 2016, 12:05, insgesamt 3-mal geändert.

SRP-2100(TMS) seit 12.12.2009 ... Firmware: 08.Apr.2014 (1.16.00) | WD20EURS | Harmony ONE
XStartTAP_TMS ==> TimerDiags | AcadeRC | TMSRemote | QuickPlay | FastSkip | TMSCommander | SmartEPG | SmartFiler | TMSDisplay | CallMonitor | RSSRP

Benutzeravatar
FireBird
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Beiträge: 28745
Registriert: Fr 9. Dez 2005, 09:59
Receivertyp: SRP-2401CI+ TFIR
vu+ Duo 4k
Wohnort: Wien

AW: Firmware SRP-2100 (04.04.2014)

#746

Beitrag von FireBird » Sa 14. Mai 2016, 11:32

Bytes 2 and 3 are the checksum of bytes 4 to 10. Go to that page, switch "Input type" to hex, enter bytes 4 to 10, click “Calculate CRC” and CRC-16 will be the result you’re after.

Benutzeravatar
Sirius
Vollzeit-Guru
Vollzeit-Guru
Beiträge: 2429
Registriert: So 8. Apr 2007, 10:05
Receivertyp: SRP-2100(TMS) / TF5500
Receiverfirmware: 08.Apr.2014 / 22.Dez.2011 PHUD
Wohnort: Hessen

AW: Firmware SRP-2100 (04.04.2014)

#747

Beitrag von Sirius » Sa 14. Mai 2016, 11:53

Thanks FireBird :hello:

your solution is that geodoc should test this modification:

Code: Alles auswählen

00 08 [color=Blue]60 24[/color] [color=Red]56 5E[/color] 00 64 01 31  => SRP-2100_22010 [color=Red]modified to 22110[/color]-2014Apr10.tfd

SRP-2100(TMS) seit 12.12.2009 ... Firmware: 08.Apr.2014 (1.16.00) | WD20EURS | Harmony ONE
XStartTAP_TMS ==> TimerDiags | AcadeRC | TMSRemote | QuickPlay | FastSkip | TMSCommander | SmartEPG | SmartFiler | TMSDisplay | CallMonitor | RSSRP

Benutzeravatar
FireBird
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Beiträge: 28745
Registriert: Fr 9. Dez 2005, 09:59
Receivertyp: SRP-2401CI+ TFIR
vu+ Duo 4k
Wohnort: Wien

AW: Firmware SRP-2100 (04.04.2014)

#748

Beitrag von FireBird » Sa 14. Mai 2016, 13:51

Yepp, that's looking good.

geodoc
Vielfrager
Vielfrager
Beiträge: 14
Registriert: Do 1. Dez 2011, 11:04

AW: Firmware SRP-2100 (04.04.2014)

#749

Beitrag von geodoc » So 15. Mai 2016, 16:00

00 08 6000 3F 6E 4A FE F1 F3 C8 8D D3 59 3C C6 D7 D9 87 C8
00 08 6010 E7 C4 AB B9 D7 28 2F 8E FD F0 DA 8A 6A 9C 71 FE
00 08 6020 C1 CC E5 5C FF A5 33 9B 5C C2 C8 0F 22 EF 9A 15
00 08 6030 46 D8 99 DA B1 F0 39 75 C6 D3 9B FF 15 3A 16 F7

Here is what I have in the lines should add the line

Benutzeravatar
Sirius
Vollzeit-Guru
Vollzeit-Guru
Beiträge: 2429
Registriert: So 8. Apr 2007, 10:05
Receivertyp: SRP-2100(TMS) / TF5500
Receiverfirmware: 08.Apr.2014 / 22.Dez.2011 PHUD
Wohnort: Hessen

AW: Firmware SRP-2100 (04.04.2014)

#750

Beitrag von Sirius » So 15. Mai 2016, 17:46

I did not understand your last post, your hex codes makes no sense.
For example in first line "3F 6E" is not a right System-ID for SRP-2100.


geodoc just do this:

1. Download the latest Firmware for SRP-2100 (ID 22010) April 2014
=> Download here

2. Open the Firmware (.tfd) file in a hex editor (f.e. HEX-Editor MX V6.x)

3. Edit the 4 bytes (blue and red marked) in the first line in the editor and save the changes.

Code: Alles auswählen

00 08 [color=Blue]60 24[/color] [color=Red]56 5E[/color] 00 64 01 31  => SRP-2100_22010 [color=Red]modified to 22110[/color]-2014Apr10.tfd
4. Update the Toppy by USB (your SRP-2100 with System-ID 22110 should now accept this new file)
Zuletzt geändert von Sirius am So 15. Mai 2016, 17:54, insgesamt 8-mal geändert.

SRP-2100(TMS) seit 12.12.2009 ... Firmware: 08.Apr.2014 (1.16.00) | WD20EURS | Harmony ONE
XStartTAP_TMS ==> TimerDiags | AcadeRC | TMSRemote | QuickPlay | FastSkip | TMSCommander | SmartEPG | SmartFiler | TMSDisplay | CallMonitor | RSSRP

geodoc
Vielfrager
Vielfrager
Beiträge: 14
Registriert: Do 1. Dez 2011, 11:04

AW: Firmware SRP-2100 (04.04.2014)

#751

Beitrag von geodoc » Mo 16. Mai 2016, 16:10

The amendment has run the Frimware is accept but it tells me CRC CHECK ERROR

geodoc
Vielfrager
Vielfrager
Beiträge: 14
Registriert: Do 1. Dez 2011, 11:04

AW: Firmware SRP-2100 (04.04.2014)

#752

Beitrag von geodoc » Mo 16. Mai 2016, 19:20

Well thanks it works remains a reconnect on the satellite and put the card in the decoder I can be the surprise that Belgian strings and French by TELESAT still works thanks

geodoc
Vielfrager
Vielfrager
Beiträge: 14
Registriert: Do 1. Dez 2011, 11:04

AW: Firmware SRP-2100 (04.04.2014)

#753

Beitrag von geodoc » Do 19. Mai 2016, 18:44

After putting on the road and research stations the problem of the sound that was not save on ASTRA channels working properly but the problem is still relevant on Hotbird free channels OK but channels such as TF1 A2 FR3 etc. are impossible to look at what are only squares and in addition I have the lyrics reading that appears at the bottom of the image.
If anyone with an idea can be the CAM?
I had hope with this new Firmware to finally use the Topfield.

Benutzeravatar
Sirius
Vollzeit-Guru
Vollzeit-Guru
Beiträge: 2429
Registriert: So 8. Apr 2007, 10:05
Receivertyp: SRP-2100(TMS) / TF5500
Receiverfirmware: 08.Apr.2014 / 22.Dez.2011 PHUD
Wohnort: Hessen

AW: Firmware SRP-2100 (04.04.2014)

#754

Beitrag von Sirius » Do 19. Mai 2016, 19:55

[quote="geodoc"] ... I have the lyrics reading that appears at the bottom of the image.[/quote]
Maybe this can help you:

Disable "first subtitle language" and "Hard of Hearing" in Menu Settings / Language.

SRP-2100(TMS) seit 12.12.2009 ... Firmware: 08.Apr.2014 (1.16.00) | WD20EURS | Harmony ONE
XStartTAP_TMS ==> TimerDiags | AcadeRC | TMSRemote | QuickPlay | FastSkip | TMSCommander | SmartEPG | SmartFiler | TMSDisplay | CallMonitor | RSSRP

tasman_shn
Mein erster Beitrag
Mein erster Beitrag
Beiträge: 1
Registriert: Sa 21. Mai 2016, 13:28

AW: Firmware SRP-2100 (04.04.2014)

#755

Beitrag von tasman_shn » Sa 21. Mai 2016, 19:28

prusony hat geschrieben:Thank you very much for your reply!
I solved problem:
Just with HEX-redactor added in damaged dump sector of right dump ***.tfd ,
then programming FLASH-chip through BEEPROG,
then soldered chip into place - tuner said "LOAD........E-2",
then load firmware from USB-flash.
Now everything OK! TF work!
Thanks again!
If someone's going this situation - try this dump: http://rghost.ru/6cHhdbYRM


I also have same problem. The problems appear when I tried to upgrade firmware using TMS Emergency Procedure.

After the upgrade is completed (END appears on the front panel) then I restart Topfiled TMS SRP 2100. Now the display on the front panel just LOADING The power button on the front panel does not work. O button no response (no lights on)

Is there another way to fix this receiver ?
Zuletzt geändert von tasman_shn am So 22. Mai 2016, 02:29, insgesamt 1-mal geändert.

Benutzeravatar
matradix
Topfmeister
Topfmeister
Beiträge: 581
Registriert: Di 21. Nov 2006, 10:02
Receivertyp: SRP 2100 EUP
Receiverfirmware: 8.4.2014
Wohnort: Rottweil, BaWü

AW: Firmware SRP-2100 (04.04.2014)

#756

Beitrag von matradix » Sa 20. Aug 2016, 10:29

Sorry falls ich etwas in dem langen Thread übersehen habe. Auch sind manche Links hier Tod.

Ich suche die neueste Firmware für den 2100. Kann mir da jemand weiterhelfen und mir mitteilen wo die zu finden ist, oder mir zusenden? Danke

Gesendet von meinem SM-N910F mit Tapatalk
TMS TAPs:
im Autostart:
SmartEPG, Automove, NiceDisplay, dbfit, ResetCam, TMSRemote, discrete_on_5k, FSkip, (SmartFiler_TMS), BackupSettings, RebuildNAV, SmartBackup, SmartDecrypter

Hardware: TMS mit WD20EURS, Samsung LCD 40", Yamaha RX-V771, Windows Home Server 2011 mit Ubuntu Server als VM, Harmony Ultimate

Astra 19.2

Benutzeravatar
macfan
Ex-iTiNa-Promoter
Ex-iTiNa-Promoter
Beiträge: 24968
Registriert: Fr 9. Dez 2005, 10:16
Receivertyp: 2 x TF 2401 CI+, 2100, 5200 C, VU+ Ultimo 4K
Receiverfirmware: SRP-Serie: die neueste, 5k: Jan 07 PTU, VU+ VTi 15.0
Wohnort: Dortmund

AW: Firmware SRP-2100 (04.04.2014)

#757

Beitrag von macfan » Sa 20. Aug 2016, 10:36

matradix hat geschrieben:Sorry falls ich etwas in dem langen Thread übersehen habe.

Stimmt, der Link ist nur 6 Beiträge höher in #750. ;)

Gruß, Horst

Benutzeravatar
matradix
Topfmeister
Topfmeister
Beiträge: 581
Registriert: Di 21. Nov 2006, 10:02
Receivertyp: SRP 2100 EUP
Receiverfirmware: 8.4.2014
Wohnort: Rottweil, BaWü

AW: Firmware SRP-2100 (04.04.2014)

#758

Beitrag von matradix » Sa 20. Aug 2016, 11:02

Danke Horst! ;)
Dies ist die neueste? Auch inoffizielle hier im Forum berücksichtigt?
Im Eingangspost wird von Firmware vom 13.8.2013 als neueste geschrieben.
TMS TAPs:
im Autostart:
SmartEPG, Automove, NiceDisplay, dbfit, ResetCam, TMSRemote, discrete_on_5k, FSkip, (SmartFiler_TMS), BackupSettings, RebuildNAV, SmartBackup, SmartDecrypter

Hardware: TMS mit WD20EURS, Samsung LCD 40", Yamaha RX-V771, Windows Home Server 2011 mit Ubuntu Server als VM, Harmony Ultimate

Astra 19.2

Benutzeravatar
wohliks
Elko-Papst
Elko-Papst
Beiträge: 4452
Registriert: Fr 9. Dez 2005, 15:36
Receivertyp: 2x VU+Duo4KSE; (no HD+)
Wohnort: Nordhessen

AW: Firmware SRP-2100 (04.04.2014)

#759

Beitrag von wohliks » Sa 20. Aug 2016, 11:13

[quote="matradix"]Dies ist die neueste? Auch inoffizielle hier im Forum berücksichtigt?
Im Eingangspost wird von Firmware vom 13.8.2013 als neueste geschrieben.[/quote]
Andersrum gefragt: Hat Dein 2100 irgendein Problem, das Du mit einer anderen als der von macfan vorgeschlagenen Firmware zu lösen hoffst?

Mein 2100 läuft unter der Firmware aus #750 (also Apr 2014) einwandfrei...
Gruß Bernhard

2x VU+ Duo 4k SE - kein HD+ - SmartEPG
60 cm Astra (FTA only), hama LYPSI Quad LNB, Schwaiger SEW 4358 5/8-Multiswitch
FB: Logitech Harmony 650 & 600

Benutzeravatar
macfan
Ex-iTiNa-Promoter
Ex-iTiNa-Promoter
Beiträge: 24968
Registriert: Fr 9. Dez 2005, 10:16
Receivertyp: 2 x TF 2401 CI+, 2100, 5200 C, VU+ Ultimo 4K
Receiverfirmware: SRP-Serie: die neueste, 5k: Jan 07 PTU, VU+ VTi 15.0
Wohnort: Dortmund

AW: Firmware SRP-2100 (04.04.2014)

#760

Beitrag von macfan » Sa 20. Aug 2016, 11:15

[quote="matradix"]Dies ist die neueste? Auch inoffizielle hier im Forum berücksichtigt?[/quote]
Das ist immer schwer zu durchschauen. Welches Datum hat denn die Firmware aus #450? Die aktuellste, die ich auf meiner Festplatte habe, ist vom 4.4.2014.

Gruß, Horst

Antworten

Zurück zu „SRP-2100 (TMS) Allgemeines Forum“