Topfield Firmware Patcher

[obsolet]

Nach oben schieb angesichts aktueller Ereignisse

Wie wärs wenn man diesen Thread pinnen würde

[nilssohn]

[quote=""obsolet""]Nach oben schieb angesichts aktueller Ereignisse[/quote]
Sinnvoll, danke! Aber wie hast Du das gemacht?

Viele Grüße

nilssohn

Edit: Ach so, ja. Indem Du einen Beitrag geschrieben hast.

[thensch]

[quote=""FireBird""]DeadBeefs USB Accelerator [ U] Beschleunigt USB-Transfers vom Topf zum PC.[/quote]Ich würde sagen, damit wird aus unserer PEST Firmware die SETUP Firmware.

[asrael]

[quote=""thensch""]Ich würde sagen, damit wird aus unserer PEST Firmware die SETUP Firmware. [/quote]

Ich bin für PUSTE.

Oder noch besser: STEPUP. Kommt zwar das P doppelt drin vor, aber hat doch eine schöne Aussage. Man muss den PowerRestore-Patch dann halt zweimal patchen, schadet ja nicht :

Mit freundlichen Grüßen

asrael

[nilssohn]

[quote=""thensch""]Ich würde sagen, damit wird aus unserer PEST Firmware die SETUP Firmware. [/quote]
[quote=""asrael""]Ich bin für PUSTE.[/quote]
Ihr amüsiert Euch, während wir Kabeltopfnutzer mangels Kompatibilität weiter auf das "E" in Euren Wortschöpfungen warten müssen...

Viele Grüße

nilssohn

[asrael]

[quote=""nilssohn""]Ihr amüsiert Euch, während wir Kabeltopfnutzer mangels Kompatibilität weiter auf das "E" in Euren Wortschöpfungen warten müssen...

Viele Grüße

nilssohn[/quote]

Kauf Dir doch eins (ein E, nicht ein Satelliten-Gerät).

Mit freundlichen Grüßen

asrael

[nilssohn]

[quote=""asrael""]Kauf Dir doch eins (ein E, nicht ein Satelliten-Gerät). [/quote]
Sag bloß, Du kannst so was ... besorgen? So ... nebenbei? Also gewissermaßen: Unter der Hand? st:

Viele Grüße

nilssohn

[asrael]

[quote=""nilssohn""]Sag bloß, Du kannst so was ... besorgen? So ... nebenbei? Also gewissermaßen: Unter der Hand? st:

Viele Grüße

nilssohn[/quote]

Ach, Sesamstraße. Und ich dachte an Maren Gilzer.

Mit freundlichen Grüßen

asrael

[nilssohn]

[quote=""asrael""]Ach, Sesamstraße. Und ich dachte an Maren Gilzer.[/quote]
Oh. Na ja, ich dachte an Drogen. Dann haben wir uns wohl missverstanden. Nichts für ungut. Verpfeif mich nicht! st:

Viele Grüße

nilssohn

[nilssohn]

Bevor's hier wieder ontopic wird: Ich könnte mein FW-Profil ja in PUST_eL ändern. Um zumindest formal mit Euch mithalten zu können.

Viele Grüße

nilssohn

[mvordeme]

Jetzt bin ich ja schwer versucht, doch auf die neue Firmware zu gehen, um den HDD-Patch durch den EPG-Patch ersetzen zu können.

[Harvey]

Für die Kabelfirmware (zumindest für die letzte mir bekannte vom 06.12.05) lohnt kein EPG-Patch.

Die FW verbrät 512kB für Titel und Kurzbeschreibung sowie weitere 512kB für die erweiterten Infos.
Mit Patch würde man keinen Speicher sparen, sonder mehr verbrauchen (256kB und 1024kB).

[nilssohn]

[quote=""Harvey""]Für die Kabelfirmware (zumindest für die letzte mir bekannte vom 06.12.05) lohnt kein EPG-Patch.

Die FW verbrät 512kB für Titel und Kurzbeschreibung sowie weitere 512kB für die erweiterten Infos.
Mit Patch würde man keinen Speicher sparen, sonder mehr verbrauchen (256kB und 1024kB).[/quote]
Ok, danke für die Info.

Viele Grüße

nilssohn

[hammer1975]

Hi!

I have just found the Firebird CableReady patch on Tapworld for the Finish TF5100c (12406). In Sweden we have a similar network system called "Boxer approved" which make the receiver install/remove/numbering channels automatically. For many users this function doesn't work very well and you cannot edit/remove/reorder channels in the receiver to your liking.

I'm wondering if this patch could be adapted to the TF57000PVRt firmware?

Best regards, Magnus
Sweden

Topfield TF5700PVRt (System ID: 2426)

[tapworld]

[quote=""hammer1975""]
I have just found the Firebird CableReady patch on Tapworld for the Finish TF5100c (12406). [/quote]

I just heard that FireBird has been a little concerned what Topfield likes about this patch.

If box has fulfilled all requirements from our CableReady specification, CableReady logo can be used with that box. This logo is supposed to add sales. I suppose that Topfield does not care what users are doing with their PVRs after PVR is sold. So I would say that they do not care about the patch.

Of course they could have coded their product better because channels could still be removed or reordered for example with favorites, but topfield's favorite support is not so good. So this patch only bypasses some poorly coded features same way as for example PowerRestore patch does.

[tapworld]

[quote=""hammer1975""]
I'm wondering if this patch could be adapted to the TF57000PVRt firmware?
[/quote]

Is this your system really made for terrestrial model? What if user lives next to Finland's border and gets also Finish channels? Cannot he or she remove Finnish channels? What happens if both, Swedish and Finnish channels have same LCNs? Finnish channel number 1 is on first place and Swedish channel number 1 is on ... lets say on channel 901? I could imagine that would be a little headache to you.

[hammer1975]

[quote=""tapworld""]Is this your system really made for terrestrial model? What if user lives next to Finland's border and gets also Finish channels? Cannot he or she remove Finnish channels? What happens if both, Swedish and Finnish channels have same LCNs? Finnish channel number 1 is on first place and Swedish channel number 1 is on ... lets say on channel 901? I could imagine that would be a little headache to you.[/quote]

Yes it's a DVB-T model and I would imagine that there would be problems if you lived close to the border as there is no way of deleting or editing the channel list. As you say the favorite function that Topfield has developed is quite useless compared to other manufacturers.

I'm wondering if the importer Kjaerulf has used the finish 5100PVRt as base for the swedish 5700PVRt as the specs seem very similar (both has inbuilt Conax). Can you edit/delete the channel list on your 5100PVRt?

Best regards, Magnus

[tapworld]

[quote=""hammer1975""]Can you edit/delete the channel list on your 5100PVRt?
[/quote]

Yes I can.

Was your model HDMI? If not, test for example our 2.83 FW (13406 is for tf5100t):
http://www.tapworld.net/fw/2.83/2.83_kaikki_mallit.zip
Just change the ID.

(I hope this 2.83 really allows you to delete/rearrange channels, at least older FWs allowed this)

Newest 2.95 FW is having bad slowliness on some users when moving on menus or using TAPs, thats why I suggest this 2.83 FW.

2.83 FW for HDMI model can be found from our forums ( http://www.tapworld.net/forum ) but it is harder to find because it has not been shared ever. It was the original FW in HDMI model so users have taken it out from PVR directly.

[hammer1975]

[quote=""tapworld""]Yes I can.

Was your model HDMI? If not, test for example our 2.83 FW (13406 is for tf5100t):
http://www.tapworld.net/fw/2.83/2.83_kaikki_mallit.zip
Just change the ID.

(I hope this 2.83 really allows you to delete/rearrange channels, at least older FWs allowed this)

Newest 2.95 FW is having bad slowliness on some users when moving on menus or using TAPs, thats why I suggest this 2.83 FW.

2.83 FW for HDMI model can be found from our forums ( http://www.tapworld.net/forum ) but it is harder to find because it has not been shared ever. It was the original FW in HDMI model so users have taken it out from PVR directly.[/quote]

I have the non HDMI version. I have been thinking of loading the finish FW before but I just haven't had the time. Which program do you recommend to do the system id patch? I tried Firebirds "Vega Pack" but it doesn't seem to want to communicate with my Topfield, it can't even read (backup) the present firmware.

Best regards, Magnus

[tapworld]

[quote=""hammer1975""]I have the non HDMI version. I have been thinking of loading the finish FW before but I just haven't had the time. Which program do you recommend to do the system id patch? I tried Firebirds "Vega Pack" but it doesn't seem to want to communicate with my Topfield, it can't even read (backup) the present firmware.
[/quote]

Try TFDPack-GUI
http://www.tapworld.net/content/view/105/47/

(or TFDPack without GUI: http://www.tapworld.net/content/view/104/44/ )