Neue Synaptics Touchpad Treiber 12.1.0.0 (Alle Win-Versionen)

[B4B]

Version 15.2.20 vom 31.März 2011
Download http://www.station-drivers.com/page/Synaptics.htm

[B4B]

Version 15.3.45.0 vom 09.Februar 2012 (alle Windowsversionen außer Windows 9x/Me). Bei dem Download auf 32-/64Bit achten).

Download http://www.station-drivers.com/page/Synaptics.htm

[B4B]

Version 16.0.2.0 vom 23.März 2012 (alle Windowsversionen außer Windows 9x/Me). Bei dem Download auf 32-/64Bit achten).

Download http://www.station-drivers.com/page/Synaptics.htm

[B4B]

Version 16.0.2.0 vom 23.März 2012 (alle Windowsversionen außer Windows 9x/Me). Bei dem Download auf 32-/64Bit achten).

Download http://www.station-drivers.com/page/Synaptics.htm

Version 16.1.6.0 http://www.station-drivers.com/page/Synaptics.htm
Funktioniert! Die Versionen darunter (ausschließlich 16.0.2.0) nicht.

[B4B]

Version 16.1.6.2 (18.Mai 2012)
Funktioniert!
Download

[B4B]

Version 16.1.8.0 vom 25.Mai 2012

Download

Anmerkung:

Sollte die "normale" Setup.exe nicht funktionieren (Synaptics-Gerät nicht gefunden!) in den Ordner "WinWDF" gehen, den x64- bzw. x32 Ordner öffnen und die "dpinst.exe" ausführen. Dann funktionierts.

[B4B]

Version 16.2.1.3 vom 13.Juni 2012 Nur Windows 7 64Bit
Die "dpinst.exe" ausführen.

Download http://www.station-drivers.com/page/Synaptics.htm

[B4B]

Windows 2000/XP/Vista/7/8

Version 16.2.16.2 vom 27.September 2012 (auf 32+64Bit achten)

Download http://www.station-drivers.com/page/Synaptics.htm

(BTW: Realtek Wlan+Lan gibt es hier http://www.station-drivers.com/page/realtek_lan.htm -->schaut in euren Gerätemanager)

(Atheros+Zidas hier http://www.station-drivers.com/page/atheros.htm)

[B4B]

Version 16.2.21 vom 26.Oktober 2012 auch für Windows 8

http://www.station-drivers.com/page/Synaptics.htm

Changelog:

Synaptics Pointing Device Driver Release Notes
Version 16.2.21
October 25, 2012

----------------------------------------------------------------------------
Overview
----------------------------------------------------------------------------
This document describes changes to the Synaptics TouchPad Driver
for Windows XP, Vista, Win7 and Linux. Only external releases have been documented.
Other releases were for internal use, beta tests, or for specific customer
requests. These are not documented here.

----------------------------------------------------------------------------
Version 16.2.21 10/25/2012 (WinXP/Vista/Win7/Linux)
----------------------------------------------------------------------------

Bug Fixes

-Add new string "Smart Check" to the resouce file.
-Presentation on RMI through HID
-Convert to vs2012: SynTPCpl. overwrite MFC SetModidies and GetParentSheet
functions
-[ADC] Put the SMBStatusNames back. Take out the cast for he NotifyFct --
declare it properly.
-Add a new plugin action for launching appList in win8
-Add support of sending keys in kernel
-Duplicate section in Inf file is a bug
-1. modified 4F left/right swipe in IE for win7 (merged from branch) 2.
Merged default scrolling direction change
-Created new INF file for testing ForcePad InterTouch.
-Enabled the Cancel button after Apply button is clicked.
-To display physical button on tray icon when button swapped. Current
design is to display the reported button state.
-Modified the binding of Drag control is enabled to the status of Activate
checkbox.
-Adjust button sizes according to cusotmer's request.
-Updated Control Panel code to swap clickpad button zones when the user
changes the left/right handedness of their system when in ClickSmart mode
in the same way that it was already being done for Omni mode.
-Add PnPID 1E9B 1E9C in OEMConsumer.inc
-Customer report a bug that kernel horizontal scrolling will be abnormal
during boot up. The root cause is driver saving scrolling direction in
ucFlag, but delaypacket will not save that flag together.
-Added our EMIT capabilities in DEBUG mode
-Create SYN2A0F, all settings are same as SYN2A0D.
-Add a PnPID for HID/I2C device.
-Changed setting to show 4FingerFlick demo video
-Adjust StartingZone/Edge Tap filter zone sizes again
-Added new help string for reverse scrolling.
-Removed SynRMIHID.sys when unsinstall
-Avoid loading GUI at boot time.
-Change settings to fix 1F-scrollig can't be triggered problem on SYN1212
-Narrow the EdgeSwipe size for SYN1052/SYN1054
-Expanding the Tiny motion region to suppress motion when finger in button
zone and highZ.
-Remove "double tapping to enable/disable TP" function on 2013 platform
(1E85, 1E86, 1E87, 1E88, 1E89, 1E90, 1E91,1E92, 1E93, 1E94, 1E95, 1E96,
1E97, 1E98, 1E99, 1E9A, 1E9B, 1E9C)
-Fix yellow bang on HID TLC2 device when unplug.
-We should inject the finger down position according the cursor position
when wrapping aroud, otherwise the injected finger will not falls inside
the window area.
-OEM request to have a App list that should force use touch-injection
other app use moden touchpad setting
-Enabled TP rotate according to screen orientation.
-Add a new plugin action for launching appList in win8

[B4B]

Version 16.3.9.0 vom 10.Januar 2013

Man kann gleich die 64Bit Version oben rechts nehmen, sind 32+64Bit drin.
Sollte die normale Setup.exe nicht funktionieren (Synaptics-Gerät nicht gefunden) die dpinst.exe ausführen.

http://www.station-drivers.com/page/Synaptics.htm

[B4B]

Neue Version 16.3.15.1 v. 25.Februar 2013

Download http://www.synaptics.com/resources/drivers/

[Wolfman]

[B4B]

Version 16.5.2.0 v. 04.April 2013

Download http://www.station-drivers.com/page/Synaptics.htm

[B4B]

Version 16.5.33 vom 23.April 2013

Download http://www.station-drivers.com/page/Synaptics.htm

[B4B]

Version 17.0.19.0 vom 17.Oktober 2013

Download Herstellerseite http://www.synaptics.com/resources/drivers

[Wolfman]