WebControl

[roger.stijfs]

@DMC

In the zip, the total translated languagefile-nl.txt for Search EPG module.

st:

[DeltaMikeCharlie]

Thanks Roger.

[HD_Topfgucker]

@DMC
I have done some more tests with the new version.
So I have tested the external communication via internet with the dolphin browser.
In this version there is a problem with the access via username and password.
Without authentication the access works well.
@ roger
Can you do some tests with external access?
Does it work ?

Sorry, but my english is not perfect.

with kind regards from Thüringen

[roger.stijfs]

@HD Topfgucker,

I'm working on that test you requested.
Englisch, Deutsch oder Niederlandisch ist alles zu verstehen.
Französisch geht gar nicht bei mir.

[DeltaMikeCharlie]

[quote="HD_Topfgucker"]So I have tested the external communication via internet with the dolphin browser. In this version there is a problem with the access via username and password.[/quote]

I have tested WebControl with Dolphin in the past, but not recently. Which version of Dolphin are you using?

[quote="HD_Topfgucker"]Sorry, but my english is not perfect.[/quote]

Your English skills are a lot better than my German skills!

[HD_Topfgucker]

@DMC
I use dolphin browser V11.4.15. In the last version it works fine.
Today evening I 'll do a test with mozilla and also IE. Then I give you some new information's.

greetings to Australia

[roger.stijfs]

Hi,
My testresults are:

For lokal acces, with and without username/password, with Chrome and FireFox with VLC addon on Win 8.1 Laptop (LAN and WiFi test) and with Chrome and FireFox on Samsung Tab4: All WebControl functions OK with all browsers. (Streaming with Firefox-VLC addon, on Tablet with VLC).

For external acces from Tongeren (National): Using a Win7 x64 desktop pc (Lan only) with Chrome and firefox with VLC addon, and the same Samsung Tab4 as above: Identical results. (Portforwarding in router set to 8800 for EPG Search).

For external acces from Maastricht (International): Using an other Win7 x64 desktop pc (Lan only) with Chrome and firefox with VLC addon, and the same Samsung Tab4 as above: Identical results. (Portforwarding in router set to 8800 for EPG Search).

Microsoft's Internet Explorer works also without anny error.

So, I can only say: Bravo.

[DeltaMikeCharlie]

[quote="HD_Topfgucker"]I use dolphin browser V11.4.15.[/quote]
I could only find Dolphin 11.3.2 to test on my Android x86 4.4 VM and I did not encounter any authentication errors.

Have you tried testing within your network to see if the problem is related to the browser or related to your router?

If you set WebControl authentication to 'all', and then try from within your home, this could help identify a problem. (06-Authentifizierung = Immer)

Also, you could consider enabling logging and check in the log file for any obvious error messages regarding authentication. (03-Log-Stufe = Detailliert)

[HD_Topfgucker]

Hi,
I have tested also a little bit. With Google Chrome it works fine. Also with mozilla firefox. Both browsers works under android lollipop well. IE under Win7 works nice.
I think the problem is the new update from dolphin browser under android lollipop.
The latest running version is no longer available on the playstore.
How can I get a downgrade?
I think the best solution is to switch the browser to chrome.
In the past I preferred dolphin.
Thanks for your support.

[roger.stijfs]

Hi,

[quote="HD_Topfgucker"]Hi,
...
I think the best solution is to switch the browser to chrome.
...
[/quote]

I use both, Chrome and FireFox.

[roger.stijfs]

Hi,

Please, explain the function: Intelligent Record? (In Create Timer Module)

I tested the function in a timer.
The result was "??" in timerlist. Normaly the timer shoud be One Day or Weekdays or something.

[matmike]

New, interesting problem using Chrome: I can't push the buttons on the remote control in the TMS Remote module using the mouse. But it works wothout problems using the touchscreen.
Anyone else with this problem?

Greetings,
Matthias

[DeltaMikeCharlie]

[quote="roger.stijfs"]Please, explain the function: Intelligent Record?[/quote]
"Intelligent Record" is supposed to create timers based on keywords. It only works for EXACT matches in the title. In Australia, it is not very popular because broadcasters often append text to the title: "The Big Bang Theory (Including Lotto at 7:48)". This will not match "The Big Bang Theory".

It is a valid timer type, so WebControl respects that. If you had an Australian PVR that supports external analogue sources, the timer edit window also would show the analogue sources as pseudo-channels.

[jkIT]

[quote="matmike"]New, interesting problem using Chrome: I can't push the buttons on the remote control in the TMS Remote module using the mouse. But it works wothout problems using the touchscreen.
Anyone else with this problem?

Greetings,
Matthias[/quote]
Yes, everyone else with a touchscreen AND a mouse.
The problem was, that if I support both methods, it will result in double-clicks on a lot of devices, because they emulate a mouse, when you touch, but additionally firing touch-events.
As workaround, the webapp is testing, wheather the device has touch support. If so, the touch-events are used, else the mouse-events.
I will search for a better solution, but I haven't found "the one" yet.

[matmike]

Thank you for the explanation, that seems to be really complicated.
Would there be a chance to configure the behaviour within WebControl? Maybe most of the people use only one of the ways for input and you could chose which one suits you best.

[jkIT]

Thank you for the explanation, that seems to be really complicated.
Would there be a chance to configure the behaviour within WebControl? Maybe most of the people use only one of the ways for input and you could chose which one suits you best.

I would prefer a solution without configuration.

As workaround, you can hack the source as a "manual configuration":

/ProgramFiles/Settings/WebControl/public_html/modules/tmsremote/tmsremote.js
Change line 158ff to:

Code: Alles auswählen

var startevent = 'mousedown';
var stopevent = 'mouseup';
var moveevent = 'mousemove';

[roger.stijfs]

Hi,

DMC, thanks for the answer. Now I know, and every one else.

Greatings.

[macfan]

Since I start WebControl using the XStart-TAP, I get no connection. XStart starts WebControl after 160 seconds.

The typical error has this form:

Code: Alles auswählen

2015-07-19 21:12:02 About to 'bind' listening socket 79 on port 8000.

2015-07-19 21:12:02 Failed to bind to listening socket.  errno=125.

If I start WebControl manually, it works. I can mail the complete log, if you want.

Gruß, Horst

[DeltaMikeCharlie]

[quote="macfan"]Since I start WebControl using the XStart-TAP, I get no connection.[/quote]
Well, some sources state that errno 125 means "Operation Cancelled" and others state "Address already in use". Normally, it's good to have choices, but not this time.

Perhaps I may be guilty of confirmation bias, but I think that "Address already in use" is the most likely choice in this case.

Q1. Are there any other processes on the PVR listening to port 8000?

If you have access to the command line, try "busybox netstat -l -p".

Q2. Did you remove WC from AutoStart when you installed XStart?

Q3. If you change WC to use another port, does the error still happen?

The network initialisation function is called at startup and also when the configuration changes.

Q4. If you load WC-Config and press "Save", do you receive the same error?

Q5. Do you have an old version of TMA1 somewhere that may have been accidentally started?

I don't use XStart, but I can try to do some experimentation over the next few days.

It is interesting that WC works OK when you start it manually. I assume that XStart uses HDD_TAP_Start(), so I might also experiment with that too.

Q6. Can you please tell me which version of XStart you are using?

Q7. Can you please send me a copy of your XStart.ini via PM?

[DeltaMikeCharlie]

I just read your post in the XStartTap_TMS thread.

If you are still using the INI file that you posted there, you have WebControl listed twice:

Code: Alles auswählen

# Boot profiles
#D=number of default profile
#T=timeout to wait in messagebox for response before starting default profile
#1=name of profile 1 (optional)
#2=name of profile 2 (optional)
#...
#(maximum of 5 profile!)
D=1
T=3
1=Standard
2=NAS
3=Test
#
# Rigid format.  Like this:
# Profile (opt.) | MinStartTime | MaxStartTime | StartDelay | BatchMode | RunOnTimerBoot | TAPFilename
0|00:00|24:00|0000|0|1|AutoPIN.tap
0|00:00|24:00|0000|0|1|SmartEPG_TMS.tap
[color=Red]1|00:00|24:00|0005|0|0|FastSkip.tap
1|00:00|24:00|0005|0|0|TMSArchive.tap
1|00:00|24:00|0090|0|1|WebControl.tap   [b]<======[/b]
1|00:00|24:00|0120|0|1|NiceDisplay.tap
1|00:00|24:00|0150|0|1|FastSkip.tap
1|00:00|24:00|0155|0|1|TMSArchive.tap
1|00:00|24:00|0160|0|1|WebControl.tap   [b]<======[/b]
1|00:00|24:00|0180|0|1|RebuildNAV.tap
1|00:00|24:00|0240|0|1|SmartDecrypter.tap
1|03:55|04:05|0100|0|1|Automove.tap
1|03:55|04:05|0300|0|1|SmartBackup.tap[/color]
2|00:00|24:00|0000|0|1|NASMount.tap
2|00:00|24:00|0001|0|1|FastSkip.tap
2|00:00|24:00|0001|0|1|TMSArchive.tap
2|00:00|24:00|0030|0|1|NiceDisplay.tap
2|00:00|24:00|0090|0|1|WebControl.tap
2|00:00|24:00|0180|0|1|RebuildNAV.tap
2|00:00|24:00|0240|0|1|SmartDecrypter.tap