New TAP to manage the PVR using HTML/CSS/JavaScript.

[jkIT]

[quote="Isarwolf"]Es ist der Topf![/quote]
Kannst Du bitte DMC das TMA1.Log aus dem Settings/TMA1/ Ordner zur Verfügung stellen.

@DMC: Isarwolf has freezes of his PVR when he uses the Inf+ module of the web interface. Maybe he can help you investigating with his log file.

[Isarwolf]

[quote="jkIT"]Kannst Du bitte DMC das TMA1.Log aus dem Settings/TMA1/ Ordner zur Verfügung stellen.

@DMC: Isarwolf has freezes of his PVR when he uses the Inf+ module of the web interface. Maybe he can help you investigating with his log file.[/quote]

There is something very strange. I have only a log of TMA1 044 from 22.02 until 27.02.2014.

I think this cannot help.

Gruß

Isarwolf

[Sirius]

Logs müssen in A060 über das TMA1-Config TAP erst eingeschaltet werden.

TMA1-Logos has been replaced by TMA1-Config. TMA1-Config also allows for the PVR to be given a name; to change the default TCP port for TMA1 and change the level of logging. Press the blue button to rebuild the logos file.

Für mein Problem hatte Log-Stufe 'Basic' genügt.

Change TMA1 logging to "Basic" and look at the log.

[DeltaMikeCharlie]

What version of INFplus are you using?

[Isarwolf]

[quote="DeltaMikeCharlie"]What version of INFplus are you using?[/quote]

INFplus 1.1 Alpha 5

And here the log. Now I get always "Checking disk"

Gruß

Isarwolf

[DeltaMikeCharlie]

The log file shows TMA1 sending the command to INFplus, but I can not see what happens after that.

Try version 1.1 Alpha 8 and see if that makes a difference.

If that version does not work:

1. When did this start happening?
2. Does the PVR crash immediately, or is there a delay?
3. Does the information for the recording you are trying to view via TMA1 work correctly with INFplus?
4. Does this happen on all recordings or only certain recordings?
5. Are the recordings local or on external media?
6. Have the recordings been "prepared for archive" or are they standard INFplus recordings?
7. Can you please enable detailed logging on INFplus and post both TMA1 & INFplus logs from when the crash occurs?

[DeltaMikeCharlie]

@Mucki - What version of INFplus are you running?

[Isarwolf]

[quote="DeltaMikeCharlie;990715
Try version 1.1 Alpha 8 and see if that makes a difference.[/quote]

With Version 1.1 Alpha 8 it works well.

Thanks

Isarwolf

[Mucki]

@Mucki - What version of INFplus are you running?

Hallo, i use the 1.1 Alpha 8 Version

[DeltaMikeCharlie]

[quote="Isarwolf"]With Version 1.1 Alpha 8 it works well.[/quote]

That's great to hear. Remember to set logging back to "None" again.

[DeltaMikeCharlie]

You can download the latest version from here.
There have been some minor changes to TMA1:

• 404 status responses are now handled correctly.
• PVR pre/post padding configuration values are now provided in the API-Config JSON response.

Changes to TMA1-Config:

• Updated to show the URL that is required to access TMA1. This is in preparation for when TMA1 is released via TAPtoDate where the users may not have enough technical knowledge to work out the URL to use.
• Fix a bug in the build logo function that caused some logos to be corrupt when extracted from the SmartEPG logo pack. You will now see the service name flash on the screen as the logos are created.
• Updated apitest.html to work correctly when no external drives are found.

On the web interface, jkIT has made some wonderful additions to the EPG module: :

• You can now create timers from the EPG info popup window.
• You can add manual padding to recordings that you create from the EPG window. Caution: This is currently in addition to any automatic padding that the PVR is configured to add.
• If you click on one of the timer bars (red lines) you can edit the timer.
• If you have a tablet, or want to delete a timer, select the timer icon in the top left hand corner of the EPG window. This will display icons below the timer bars that will allow you to perform extra actions on the timers.

Don't forget to rebuild your logos!

TAPtoDate - Although we are not ready for TAPtoDate yet, jkIT and I have done some early planning. Over the coming weeks, I may post an "Alpha" release to TAPtoDate so that members of this forum can test the installation process (password will be needed) and provide feedback. Some pre-release setup notes can be found here. They are only in English for now, but I plan to have them translated into German for release via TAPtoDate.

[dRdoS7]

Hi,

When I ran the config tap it displayed only part of the url eg. 192.168.10:8000 when it's actually http://192.168.1.105:8000/.

Also, there appears to be no way to move the cursor in the PVR name. Backspace only.

dRdoS7

[DeltaMikeCharlie]

When I ran the config tap it displayed only part of the url eg. 192.168.10:8000 when it's actually http://192.168.1.105:8000/.

Nothing like a bit of regression to spice things up. I had this bug during development and I thought that I had fixed it. Obviously not!

Also, there appears to be no way to move the cursor in the PVR name. Backspace only.

I would have to defer to FireBird on this one, I just borrowed his library. Have you tried it via TMSRemote and a keyboard?

[dRdoS7]

Hi,

[quote="DeltaMikeCharlie"]I would have to defer to FireBird on this one, I just borrowed his library. Have you tried it via TMSRemote and a keyboard?[/quote]

I just tried it. The << >> |<>| keys work: they just aren't displayed on screen as useable keys (like "Exit", etc.).

dRdoS7

[Isarwolf]

I have deleted this morning a radio recording and got this message:

Beim löschen der Datei ist ein Fehler aufgetreten.
mpg_status: 0
inf_status: 0
nav_status: -1

The system is waiting for a nav-file but radio recordings don't have nav-files.

Greetings

Isarwolf

[jkIT]

I have deleted this morning a radio recording and got this message:

Code: Alles auswählen

Beim löschen der Datei ist ein Fehler aufgetreten.
mpg_status: 0
inf_status: 0
nav_status: -1                      

The system is waiting for a nav-file but radio recordings don't have nav-files.

Greetings

Isarwolf

Thanks for the hint. The client system is always checking all three parameters. I will change that.

[DeltaMikeCharlie]

It's been a long time, but here is the next version of TMA1.

The TAP has had some minor stability improvements.

jkIT has added some features to the EPG module:

• The EPG now shows 7 days of events.
• Recurring reservations are shown for each future occurrence in a different colour.

Don't forget to rebuild your logo files.

[Töppi]

thanks!

[gerd.schmidt]

Habe heute auf die neue Version A063 upgedatet. Bekomme keine Verbindung mehr. Statt dessen kommt

Initialising ...
tma.logos OK
Time stamp goes here.
Record counter goes here.
Config info goes here.

Im log befindet sich folgender Eintrag:

Code: Alles auswählen

2014-06-13 10:35:54 error in tma.loadLogos()  error: OK  xhrReadyState: 4  xhrStatus: 404

Habe alle Dateien und Ordner 1:1 ersetzt. Woran kann's liegen?

Gerd

[jkIT]

Starte das Setup TAP TMA1-Config und erstelle mit der blauen Taste eine Datei für die Logos. Dann sollte es klappen.