EPG-Scan bricht ab

LAL · #61

VaniQ hat geschrieben:Na das ist doch die Hauptsache, hoffen wir mal, es bleibt so bestehen.

Heute morgen nach dem automatischen Scan sind alle EPG Daten da bis am nächsten Samstag. Es sieht gut aus. Und das autom. EPG-Update scheint nicht mehr zu stören.

Gruss
Luc

MrCooper · #62

VaniQ hat geschrieben:Mysteriös, habe schon mal irgendwo hier im Forum gelesen, dass SE gewisse Sender einfach auf igno stetzt , aber ka wo.

Das hängt mit einem altbekannten, aber leider immer noch ungelösten Problem zusammen: Wenn SE die Kanalliste mit der Topf-eigenen synchronisiert, ändern sich manchmal Channel IDs wie von Geisterhand (wenn ich mich richtig erinnere, schwanken sie zwischen den richtigen IDs und 0). Deshalb wird die Liste seit SE 0.9.5 nur noch synchronisiert, wenn man im SE Menü in die Kanalliste geht, vorher konnte das auch im normalen Betrieb auftreten.

makiao · #63

Seit der Aufschaltung der neuen Sender hab ich oft "Löcher" im EPG. Einfach Stundenlang nichts auf verschiedensten Sendern zu verschiedensten Zeiten. Nutze 2.9c mit Cablecom. Heute fehlt zum Beispiel der ganze Tag RTL bis 23.00 und SF1 der halbe Tag, sowie immer mal wieder Stundenweise auf verschiedensten Sendern.

Ein Manueller Scan hat nun scheinbar die Löcher gefüllt. Aber sollte schon nicht so sein oder?

Das die EPG Daten nun eher noch weniger zu gebrauchen sind als vor der Wahnsinnigen Umstellung ist auch Übel. Danke Cablecom.

Twilight · #64

1. wo ist das log?
2. wann scannst du?

twilight

makiao · #65

Guten Morgen, das ging ja flink. Der scan ist auf 7Uhr gesetzt. Und ist dieses Log gemeint?

Code: Alles auswählen

2012-06-17 07:00:00 It's SmartEPG scan time
2012-06-17 07:00:00 GUIMode stack: GM_TransponderScan - GM_Inactive - 
2012-06-17 07:00:00 isScanTimer flag = set
2012-06-17 07:00:00 TS_ScanModeInit
2012-06-17 07:00:00 SM_Standby
2012-06-17 07:00:00 Rebuildnav: Server not available
2012-06-17 07:00:00 # of transponders to be scanned = 1
2012-06-17 07:00:00 TS_ScanSetTransponder
2012-06-17 07:00:00 Scanner: switching to transponder 32784 (Info Channel)
2012-06-17 07:00:01 TS_ScanTransponder
2012-06-17 07:00:01 SM_Init
2012-06-17 07:00:01 SM_SetupEITDemux
2012-06-17 07:00:01 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:00:01 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:00:01 Scanner: launching EIT filter for table 0x50
2012-06-17 07:00:01 Scanner: launching EIT filter for table 0x60
2012-06-17 07:00:02 SM_Stabilize
2012-06-17 07:00:04 Scanner: launching EIT filter for table 0x61
2012-06-17 07:00:04 SM_WaitForEITData
2012-06-17 07:00:04 Scanner: launching EIT filter for table 0x51
2012-06-17 07:00:20 FlashTimerDebug: difference found @ 'Entry'
2012-06-17 07:00:20 ScanTimerMonitor: ScanTimer has been set to 2012-06-18 06:59
2012-06-17 07:00:29 Scanner: the version number of at least one data stream has changed (61: 13->14). Restarting scan for this transponder.
2012-06-17 07:00:29 SM_Restart
2012-06-17 07:00:30 SM_Init
2012-06-17 07:00:31 SM_SetupEITDemux
2012-06-17 07:00:31 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:00:31 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:00:31 Scanner: launching EIT filter for table 0x50
2012-06-17 07:00:31 Scanner: launching EIT filter for table 0x60
2012-06-17 07:00:31 SM_Stabilize
2012-06-17 07:00:33 SM_WaitForEITData
2012-06-17 07:00:41 Scanner: the version number of at least one data stream has changed (60: 11->12). Restarting scan for this transponder.
2012-06-17 07:00:41 SM_Restart
2012-06-17 07:00:42 SM_Init
2012-06-17 07:00:42 SM_SetupEITDemux
2012-06-17 07:00:42 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:00:42 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:00:42 Scanner: launching EIT filter for table 0x50
2012-06-17 07:00:42 Scanner: launching EIT filter for table 0x60
2012-06-17 07:00:42 SM_Stabilize
2012-06-17 07:00:44 SM_WaitForEITData
2012-06-17 07:00:54 Scanner: the version number of at least one data stream has changed (60: 16->17). Restarting scan for this transponder.
2012-06-17 07:00:54 SM_Restart
2012-06-17 07:00:54 SM_Init
2012-06-17 07:00:55 SM_SetupEITDemux
2012-06-17 07:00:55 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:00:55 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:00:55 Scanner: launching EIT filter for table 0x50
2012-06-17 07:00:55 Scanner: launching EIT filter for table 0x60
2012-06-17 07:00:55 SM_Stabilize
2012-06-17 07:00:57 SM_WaitForEITData
2012-06-17 07:01:04 Scanner: the version number of at least one data stream has changed (60: 20->21). Restarting scan for this transponder.
2012-06-17 07:01:04 SM_Restart
2012-06-17 07:01:04 SM_Init
2012-06-17 07:01:05 SM_SetupEITDemux
2012-06-17 07:01:05 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:01:05 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:01:05 Scanner: launching EIT filter for table 0x50
2012-06-17 07:01:05 Scanner: launching EIT filter for table 0x60
2012-06-17 07:01:05 SM_Stabilize
2012-06-17 07:01:07 SM_WaitForEITData
2012-06-17 07:01:11 Scanner: the version number of at least one data stream has changed (60: 26->27). Restarting scan for this transponder.
2012-06-17 07:01:11 SM_Restart
2012-06-17 07:01:11 SM_Init
2012-06-17 07:01:12 SM_SetupEITDemux
2012-06-17 07:01:12 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:01:12 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:01:12 Scanner: launching EIT filter for table 0x50
2012-06-17 07:01:12 Scanner: launching EIT filter for table 0x60
2012-06-17 07:01:12 SM_Stabilize
2012-06-17 07:01:14 SM_WaitForEITData
2012-06-17 07:01:30 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:01:30 SM_Restart
2012-06-17 07:01:31 SM_Init
2012-06-17 07:01:31 SM_SetupEITDemux
2012-06-17 07:01:31 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:01:31 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:01:31 Scanner: launching EIT filter for table 0x50
2012-06-17 07:01:31 Scanner: launching EIT filter for table 0x60
2012-06-17 07:01:31 SM_Stabilize
2012-06-17 07:01:33 SM_WaitForEITData
2012-06-17 07:01:38 Scanner: the version number of at least one data stream has changed (60: 11->12). Restarting scan for this transponder.
2012-06-17 07:01:38 SM_Restart
2012-06-17 07:01:38 SM_Init
2012-06-17 07:01:39 SM_SetupEITDemux
2012-06-17 07:01:39 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:01:39 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:01:39 Scanner: launching EIT filter for table 0x50
2012-06-17 07:01:39 Scanner: launching EIT filter for table 0x60
2012-06-17 07:01:39 SM_Stabilize
2012-06-17 07:01:41 SM_WaitForEITData
2012-06-17 07:01:45 Scanner: the version number of at least one data stream has changed (60: 17->18). Restarting scan for this transponder.
2012-06-17 07:01:45 SM_Restart
2012-06-17 07:01:45 SM_Init
2012-06-17 07:01:45 SM_SetupEITDemux
2012-06-17 07:01:45 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:01:45 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:01:45 Scanner: launching EIT filter for table 0x50
2012-06-17 07:01:45 Scanner: launching EIT filter for table 0x60
2012-06-17 07:01:46 SM_Stabilize
2012-06-17 07:01:48 SM_WaitForEITData
2012-06-17 07:01:55 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:01:55 SM_Restart
2012-06-17 07:01:56 SM_Init
2012-06-17 07:01:56 SM_SetupEITDemux
2012-06-17 07:01:56 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:01:56 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:01:56 Scanner: launching EIT filter for table 0x50
2012-06-17 07:01:56 Scanner: launching EIT filter for table 0x60
2012-06-17 07:01:56 SM_Stabilize
2012-06-17 07:01:58 SM_WaitForEITData
2012-06-17 07:02:10 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:02:10 SM_Restart
2012-06-17 07:02:10 SM_Init
2012-06-17 07:02:11 SM_SetupEITDemux
2012-06-17 07:02:11 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:02:11 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:02:11 Scanner: launching EIT filter for table 0x50
2012-06-17 07:02:11 Scanner: launching EIT filter for table 0x60
2012-06-17 07:02:11 SM_Stabilize
2012-06-17 07:02:13 SM_WaitForEITData
2012-06-17 07:02:21 Scanner: the version number of at least one data stream has changed (60: 16->17). Restarting scan for this transponder.
2012-06-17 07:02:21 SM_Restart
2012-06-17 07:02:22 SM_Init
2012-06-17 07:02:22 SM_SetupEITDemux
2012-06-17 07:02:22 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:02:22 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:02:22 Scanner: launching EIT filter for table 0x50
2012-06-17 07:02:22 Scanner: launching EIT filter for table 0x60
2012-06-17 07:02:22 SM_Stabilize
2012-06-17 07:02:24 SM_WaitForEITData
2012-06-17 07:02:35 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:02:35 SM_Restart
2012-06-17 07:02:36 SM_Init
2012-06-17 07:02:36 SM_SetupEITDemux
2012-06-17 07:02:36 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:02:36 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:02:36 Scanner: launching EIT filter for table 0x50
2012-06-17 07:02:36 Scanner: launching EIT filter for table 0x60
2012-06-17 07:02:36 SM_Stabilize
2012-06-17 07:02:38 SM_WaitForEITData
2012-06-17 07:02:44 Scanner: the version number of at least one data stream has changed (60: 16->17). Restarting scan for this transponder.
2012-06-17 07:02:44 SM_Restart
2012-06-17 07:02:44 SM_Init
2012-06-17 07:02:44 SM_SetupEITDemux
2012-06-17 07:02:44 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:02:44 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:02:44 Scanner: launching EIT filter for table 0x50
2012-06-17 07:02:44 Scanner: launching EIT filter for table 0x60
2012-06-17 07:02:45 SM_Stabilize
2012-06-17 07:02:47 SM_WaitForEITData
2012-06-17 07:02:55 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:02:55 SM_Restart
2012-06-17 07:02:55 SM_Init
2012-06-17 07:02:56 SM_SetupEITDemux
2012-06-17 07:02:56 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:02:56 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:02:56 Scanner: launching EIT filter for table 0x50
2012-06-17 07:02:56 Scanner: launching EIT filter for table 0x60
2012-06-17 07:02:56 SM_Stabilize
2012-06-17 07:02:58 SM_WaitForEITData
2012-06-17 07:03:09 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:03:09 SM_Restart
2012-06-17 07:03:10 SM_Init
2012-06-17 07:03:10 SM_SetupEITDemux
2012-06-17 07:03:10 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:03:10 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:03:10 Scanner: launching EIT filter for table 0x50
2012-06-17 07:03:10 Scanner: launching EIT filter for table 0x60
2012-06-17 07:03:10 SM_Stabilize
2012-06-17 07:03:12 SM_WaitForEITData
2012-06-17 07:03:20 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:03:20 SM_Restart
2012-06-17 07:03:21 SM_Init
2012-06-17 07:03:21 SM_SetupEITDemux
2012-06-17 07:03:21 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:03:21 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:03:21 Scanner: launching EIT filter for table 0x50
2012-06-17 07:03:21 Scanner: launching EIT filter for table 0x60
2012-06-17 07:03:21 SM_Stabilize
2012-06-17 07:03:23 SM_WaitForEITData
2012-06-17 07:03:38 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:03:38 SM_Restart
2012-06-17 07:03:39 SM_Init
2012-06-17 07:03:39 SM_SetupEITDemux
2012-06-17 07:03:39 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:03:39 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:03:39 Scanner: launching EIT filter for table 0x50
2012-06-17 07:03:39 Scanner: launching EIT filter for table 0x60
2012-06-17 07:03:39 SM_Stabilize
2012-06-17 07:03:41 SM_WaitForEITData
2012-06-17 07:03:48 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:03:48 SM_Restart
2012-06-17 07:03:49 SM_Init
2012-06-17 07:03:49 SM_SetupEITDemux
2012-06-17 07:03:49 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:03:49 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:03:49 Scanner: launching EIT filter for table 0x50
2012-06-17 07:03:49 Scanner: launching EIT filter for table 0x60
2012-06-17 07:03:49 SM_Stabilize
2012-06-17 07:03:51 SM_WaitForEITData
2012-06-17 07:03:58 Scanner: the version number of at least one data stream has changed (60: 14->15). Restarting scan for this transponder.
2012-06-17 07:03:58 SM_Restart
2012-06-17 07:03:59 SM_Init
2012-06-17 07:03:59 SM_SetupEITDemux
2012-06-17 07:03:59 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:03:59 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:03:59 Scanner: launching EIT filter for table 0x50
2012-06-17 07:03:59 Scanner: launching EIT filter for table 0x60
2012-06-17 07:03:59 SM_Stabilize
2012-06-17 07:04:01 SM_WaitForEITData
2012-06-17 07:04:11 Scanner: the version number of at least one data stream has changed (60: 14->15). Restarting scan for this transponder.
2012-06-17 07:04:11 SM_Restart
2012-06-17 07:04:11 SM_Init
2012-06-17 07:04:12 SM_SetupEITDemux
2012-06-17 07:04:12 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:04:12 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:04:12 Scanner: launching EIT filter for table 0x50
2012-06-17 07:04:12 Scanner: launching EIT filter for table 0x60
2012-06-17 07:04:12 SM_Stabilize
2012-06-17 07:04:14 SM_WaitForEITData
2012-06-17 07:04:25 Scanner: the version number of at least one data stream has changed (60: 15->16). Restarting scan for this transponder.
2012-06-17 07:04:25 SM_Restart
2012-06-17 07:04:25 SM_Init
2012-06-17 07:04:26 SM_SetupEITDemux
2012-06-17 07:04:26 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:04:26 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:04:26 Scanner: launching EIT filter for table 0x50
2012-06-17 07:04:26 Scanner: launching EIT filter for table 0x60
2012-06-17 07:04:26 SM_Stabilize
2012-06-17 07:04:28 SM_WaitForEITData
2012-06-17 07:04:39 Scanner: the version number of at least one data stream has changed (60: 13->14). Restarting scan for this transponder.
2012-06-17 07:04:39 SM_Restart
2012-06-17 07:04:40 SM_Init
2012-06-17 07:04:40 SM_SetupEITDemux
2012-06-17 07:04:40 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:04:40 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:04:40 Scanner: launching EIT filter for table 0x50
2012-06-17 07:04:40 Scanner: launching EIT filter for table 0x60
2012-06-17 07:04:40 SM_Stabilize
2012-06-17 07:04:42 SM_WaitForEITData
2012-06-17 07:04:47 Scanner: the version number of at least one data stream has changed (60: 13->14). Restarting scan for this transponder.
2012-06-17 07:04:47 SM_Restart
2012-06-17 07:04:48 SM_Init
2012-06-17 07:04:48 SM_SetupEITDemux
2012-06-17 07:04:48 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:04:48 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:04:48 Scanner: launching EIT filter for table 0x50
2012-06-17 07:04:48 Scanner: launching EIT filter for table 0x60
2012-06-17 07:04:48 SM_Stabilize
2012-06-17 07:04:50 SM_WaitForEITData
2012-06-17 07:05:01 Scanner: the version number of at least one data stream has changed (60: 14->15). Restarting scan for this transponder.
2012-06-17 07:05:01 SM_Restart
2012-06-17 07:05:01 SM_Init
2012-06-17 07:05:02 SM_SetupEITDemux
2012-06-17 07:05:02 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:05:02 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:05:02 Scanner: launching EIT filter for table 0x50
2012-06-17 07:05:02 Scanner: launching EIT filter for table 0x60
2012-06-17 07:05:02 SM_Stabilize
2012-06-17 07:05:04 SM_WaitForEITData
2012-06-17 07:05:15 Scanner: the version number of at least one data stream has changed (60: 15->16). Restarting scan for this transponder.
2012-06-17 07:05:15 SM_Restart
2012-06-17 07:05:16 SM_Init
2012-06-17 07:05:16 SM_SetupEITDemux
2012-06-17 07:05:16 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:05:16 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:05:16 Scanner: launching EIT filter for table 0x50
2012-06-17 07:05:16 Scanner: launching EIT filter for table 0x60
2012-06-17 07:05:16 SM_Stabilize
2012-06-17 07:05:18 SM_WaitForEITData
2012-06-17 07:05:29 Scanner: the version number of at least one data stream has changed (60: 13->14). Restarting scan for this transponder.
2012-06-17 07:05:29 SM_Restart
2012-06-17 07:05:30 SM_Init
2012-06-17 07:05:30 SM_SetupEITDemux
2012-06-17 07:05:30 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:05:30 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:05:30 Scanner: launching EIT filter for table 0x50
2012-06-17 07:05:30 Scanner: launching EIT filter for table 0x60
2012-06-17 07:05:30 SM_Stabilize
2012-06-17 07:05:32 SM_WaitForEITData
2012-06-17 07:05:44 Scanner: the version number of at least one data stream has changed (60: 14->15). Restarting scan for this transponder.
2012-06-17 07:05:44 SM_Restart
2012-06-17 07:05:44 SM_Init
2012-06-17 07:05:44 SM_SetupEITDemux
2012-06-17 07:05:44 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:05:44 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:05:44 Scanner: launching EIT filter for table 0x50
2012-06-17 07:05:44 Scanner: launching EIT filter for table 0x60
2012-06-17 07:05:45 SM_Stabilize
2012-06-17 07:05:47 SM_WaitForEITData
2012-06-17 07:06:00 Scanner: the version number of at least one data stream has changed (60: 15->16). Restarting scan for this transponder.
2012-06-17 07:06:00 SM_Restart
2012-06-17 07:06:01 SM_Init
2012-06-17 07:06:01 SM_SetupEITDemux
2012-06-17 07:06:01 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:06:01 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:06:01 Scanner: launching EIT filter for table 0x50
2012-06-17 07:06:01 Scanner: launching EIT filter for table 0x60
2012-06-17 07:06:01 SM_Stabilize
2012-06-17 07:06:04 SM_WaitForEITData
2012-06-17 07:06:24 Scanner: the version number of at least one data stream has changed (60: 16->17). Restarting scan for this transponder.
2012-06-17 07:06:24 SM_Restart
2012-06-17 07:06:24 SM_Init
2012-06-17 07:06:25 SM_SetupEITDemux
2012-06-17 07:06:25 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:06:25 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:06:25 Scanner: launching EIT filter for table 0x50
2012-06-17 07:06:25 Scanner: launching EIT filter for table 0x60
2012-06-17 07:06:25 SM_Stabilize
2012-06-17 07:06:27 SM_WaitForEITData
2012-06-17 07:06:40 Scanner: the version number of at least one data stream has changed (60: 16->17). Restarting scan for this transponder.
2012-06-17 07:06:40 SM_Restart
2012-06-17 07:06:40 SM_Init
2012-06-17 07:06:40 SM_SetupEITDemux
2012-06-17 07:06:40 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:06:40 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:06:40 Scanner: launching EIT filter for table 0x50
2012-06-17 07:06:40 Scanner: launching EIT filter for table 0x60
2012-06-17 07:06:41 SM_Stabilize
2012-06-17 07:06:43 SM_WaitForEITData
2012-06-17 07:06:56 Scanner: the version number of at least one data stream has changed (60: 12->13). Restarting scan for this transponder.
2012-06-17 07:06:56 SM_Restart
2012-06-17 07:06:57 SM_Init
2012-06-17 07:06:57 SM_SetupEITDemux
2012-06-17 07:06:57 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:06:57 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:06:57 Scanner: launching EIT filter for table 0x50
2012-06-17 07:06:57 Scanner: launching EIT filter for table 0x60
2012-06-17 07:06:57 SM_Stabilize
2012-06-17 07:06:59 SM_WaitForEITData
2012-06-17 07:07:07 Scanner: the version number of at least one data stream has changed (60: 15->16). Restarting scan for this transponder.
2012-06-17 07:07:07 SM_Restart
2012-06-17 07:07:07 SM_Init
2012-06-17 07:07:07 SM_SetupEITDemux
2012-06-17 07:07:07 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:07:07 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:07:07 Scanner: launching EIT filter for table 0x50
2012-06-17 07:07:07 Scanner: launching EIT filter for table 0x60
2012-06-17 07:07:07 SM_Stabilize
2012-06-17 07:07:09 SM_WaitForEITData
2012-06-17 07:07:18 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:07:18 SM_Restart
2012-06-17 07:07:18 SM_Init
2012-06-17 07:07:19 SM_SetupEITDemux
2012-06-17 07:07:19 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:07:19 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:07:19 Scanner: launching EIT filter for table 0x50
2012-06-17 07:07:19 Scanner: launching EIT filter for table 0x60
2012-06-17 07:07:19 SM_Stabilize
2012-06-17 07:07:21 SM_WaitForEITData
2012-06-17 07:07:27 Scanner: the version number of at least one data stream has changed (60: 16->17). Restarting scan for this transponder.
2012-06-17 07:07:28 SM_Restart
2012-06-17 07:07:28 SM_Init
2012-06-17 07:07:28 SM_SetupEITDemux
2012-06-17 07:07:28 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:07:28 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:07:28 Scanner: launching EIT filter for table 0x50
2012-06-17 07:07:28 Scanner: launching EIT filter for table 0x60
2012-06-17 07:07:28 SM_Stabilize
2012-06-17 07:07:30 SM_WaitForEITData
2012-06-17 07:07:39 Scanner: the version number of at least one data stream has changed (60: 16->17). Restarting scan for this transponder.
2012-06-17 07:07:39 SM_Restart
2012-06-17 07:07:39 SM_Init
2012-06-17 07:07:40 SM_SetupEITDemux
2012-06-17 07:07:40 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:07:40 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:07:40 Scanner: launching EIT filter for table 0x50
2012-06-17 07:07:40 Scanner: launching EIT filter for table 0x60
2012-06-17 07:07:40 SM_Stabilize
2012-06-17 07:07:42 SM_WaitForEITData
2012-06-17 07:07:56 Scanner: the version number of at least one data stream has changed (60: 13->14). Restarting scan for this transponder.
2012-06-17 07:07:56 SM_Restart
2012-06-17 07:07:57 SM_Init
2012-06-17 07:07:57 SM_SetupEITDemux
2012-06-17 07:07:57 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:07:57 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:07:57 Scanner: launching EIT filter for table 0x50
2012-06-17 07:07:57 Scanner: launching EIT filter for table 0x60
2012-06-17 07:07:57 SM_Stabilize
2012-06-17 07:08:00 SM_WaitForEITData
2012-06-17 07:08:02 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:08:02 SM_Restart
2012-06-17 07:08:03 SM_Init
2012-06-17 07:08:03 SM_SetupEITDemux
2012-06-17 07:08:03 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:08:03 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:08:03 Scanner: launching EIT filter for table 0x50
2012-06-17 07:08:03 Scanner: launching EIT filter for table 0x60
2012-06-17 07:08:03 SM_Stabilize
2012-06-17 07:08:05 SM_WaitForEITData
2012-06-17 07:08:16 Scanner: the version number of at least one data stream has changed (60: 11->12). Restarting scan for this transponder.
2012-06-17 07:08:16 SM_Restart
2012-06-17 07:08:16 SM_Init
2012-06-17 07:08:17 SM_SetupEITDemux
2012-06-17 07:08:17 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:08:17 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:08:17 Scanner: launching EIT filter for table 0x50
2012-06-17 07:08:17 Scanner: launching EIT filter for table 0x60
2012-06-17 07:08:17 SM_Stabilize
2012-06-17 07:08:19 SM_WaitForEITData
2012-06-17 07:08:33 Scanner: the version number of at least one data stream has changed (60: 12->13). Restarting scan for this transponder.
2012-06-17 07:08:33 SM_Restart
2012-06-17 07:08:33 SM_Init
2012-06-17 07:08:34 SM_SetupEITDemux
2012-06-17 07:08:34 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:08:34 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:08:34 Scanner: launching EIT filter for table 0x50
2012-06-17 07:08:34 Scanner: launching EIT filter for table 0x60
2012-06-17 07:08:34 SM_Stabilize
2012-06-17 07:08:36 SM_WaitForEITData
2012-06-17 07:08:44 Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.
2012-06-17 07:08:44 SM_Restart
2012-06-17 07:08:45 SM_Init
2012-06-17 07:08:45 SM_SetupEITDemux
2012-06-17 07:08:45 Scanner: launching EIT filter for table 0x4e
2012-06-17 07:08:45 Scanner: launching EIT filter for table 0x4f
2012-06-17 07:08:45 Scanner: launching EIT filter for table 0x50
2012-06-17 07:08:45 Scanner: launching EIT filter for table 0x60
2012-06-17 07:08:45 SM_Stabilize
2012-06-17 07:08:47 SM_WaitForEITData
2012-06-17 07:10:01 Scan of this transponder terminated because of a 10 minutes timeout. Got 82%
2012-06-17 07:10:01 SM_ExitAndSave
2012-06-17 07:10:12 Scanner: 9725 EIT packets received
2012-06-17 07:10:14 SM_MemStabilize
2012-06-17 07:10:16 TS_InterpretEITData
2012-06-17 07:10:16 SM_Standby
2012-06-17 07:10:16 EPGDB: Processing 1 eit files
2012-06-17 07:11:27 Scanner: Total events    =    39664
2012-06-17 07:11:27 Scanner: Filtered events =    12179
2012-06-17 07:11:27 Scanner: 12179 events found
2012-06-17 07:11:27 Performing EPG search
2012-06-17 07:11:27 SearchDB: number of search entries is 0
2012-06-17 07:11:27 TimerDB: deleting DB timer '00 'SmartEPG' (2012-06-17 07:00/2')'
2012-06-17 07:11:28 TS_Exit
2012-06-17 07:11:28 isScanTimer flag = cleared
2012-06-17 07:11:28 TS_Shutdown
2012-06-17 07:11:38 Shutting SE down, power down flag set
2012-06-17 07:11:38 Within scan period, therefore no scan timer setup
2012-06-17 07:11:38 SE shutdown finished
2012-06-17 07:11:39 GUIMode stack: GM_Inactive - 
2012-06-17 07:11:39 Shutting SE down, power down flag not set
2012-06-17 07:11:39 Within scan period, therefore no scan timer setup
2012-06-17 07:11:39 SE shutdown finished
2012-06-17 08:30:33 ===================================================
2012-06-17 08:30:33 SmartEPG_TMS  V2.9c
2012-06-17 08:30:33 SysID=42031(CRP-2401CI+), Firmware=0x0100, Rec=.rec
2012-06-17 08:30:33 TimeZone = 60 min (+DST)
2012-06-17 08:30:33 System type: TMS DVBc
2012-06-17 08:30:34 Process Recommendationlist
2012-06-17 08:30:34 Processing failed
2012-06-17 08:30:34 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2012-06-17 08:30:34 GUIMode stack: GM_Inactive - 
2012-06-17 08:30:34 isScanTimer flag = cleared
2012-06-17 08:30:34 ScanTimerMonitor: ScanTimer has been set to 2012-06-18 06:59
2012-06-17 08:30:35 LogoManager: 6273 cache records have been loaded
2012-06-17 08:30:35 IQTuner TAP is running
2012-06-17 08:30:35 TimerDB: DBTimer 'SmartEPG': start time has changed from '2012-06-17 07:00' to '2012-06-18 07:00'
2012-06-17 08:34:29 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 08:35:35 GUIMode stack: GM_Inactive - 
2012-06-17 08:37:57 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 08:37:59 GUIMode stack: GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 08:38:00 GUIMode stack: GM_Setup_ChannelsToScan - GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 08:38:28 GUIMode stack: GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 08:38:32 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 08:38:34 GUIMode stack: GM_Inactive - 
2012-06-17 08:38:35 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 08:38:44 GUIMode stack: GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 08:38:46 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 08:38:49 GUIMode stack: GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 08:38:57 GUIMode stack: GM_TransponderScan - GM_Grid - GM_Inactive - 
2012-06-17 08:38:57 TS_ScanModeInit
2012-06-17 08:38:57 SM_Standby
2012-06-17 08:38:57 Rebuildnav: Server not available
2012-06-17 08:38:58 # of transponders to be scanned = 1
2012-06-17 08:38:58 TS_ScanSetTransponder
2012-06-17 08:38:58 Scanner: switching to transponder 32784 (Info Channel)
2012-06-17 08:38:58 TS_ScanTransponder
2012-06-17 08:38:58 SM_Init
2012-06-17 08:38:59 SM_SetupEITDemux
2012-06-17 08:38:59 Scanner: launching EIT filter for table 0x4e
2012-06-17 08:38:59 Scanner: launching EIT filter for table 0x4f
2012-06-17 08:38:59 Scanner: launching EIT filter for table 0x50
2012-06-17 08:38:59 Scanner: launching EIT filter for table 0x60
2012-06-17 08:38:59 SM_Stabilize
2012-06-17 08:39:01 Scanner: launching EIT filter for table 0x61
2012-06-17 08:39:01 SM_WaitForEITData
2012-06-17 08:39:02 Scanner: launching EIT filter for table 0x51
2012-06-17 08:41:26 Scanner: 100% of 21785 EIT sections received
2012-06-17 08:41:26 SM_ExitAndSave
2012-06-17 08:41:49 Scanner: 21785 EIT packets received
2012-06-17 08:41:41 SM_MemStabilize
2012-06-17 08:41:44 TS_InterpretEITData
2012-06-17 08:41:44 SM_Standby
2012-06-17 08:41:44 EPGDB: Processing 1 eit files
2012-06-17 08:46:10 Scanner: Total events    =    91866
2012-06-17 08:46:10 Scanner: Filtered events =    28162
2012-06-17 08:46:10 Scanner: 28162 events found
2012-06-17 08:46:10 Performing EPG search
2012-06-17 08:46:10 SearchDB: number of search entries is 0
2012-06-17 08:46:11 TimerDB: deleting DB timer '00 'SmartEPG' (2012-06-18 07:00/2')'
2012-06-17 08:46:11 TS_Exit
2012-06-17 08:46:11 TimerDB: deleting DB timer '00 'SmartEPG' (2012-06-18 07:00/2')'
2012-06-17 08:46:11 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 08:47:17 GUIMode stack: GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 08:47:38 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 08:47:40 GUIMode stack: GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 08:47:41 GUIMode stack: GM_Setup_ChannelsToScan - GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 08:48:15 GUIMode stack: GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 08:48:19 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 08:48:30 GUIMode stack: GM_Inactive - 
2012-06-17 08:49:02 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2012-06-17 08:49:03 GUIMode stack: GM_Infobox - GM_Inactive - 
2012-06-17 08:49:03 Infobox: attaching to /mnt/hd/DataFiles/Navy CIS -  - 2012-06-10 20-15(DEC)-1.rec.inf
2012-06-17 08:49:03 InfoboxMode: IBDM_InfoAndPVR - IBM_Playback - IBPM_Rec
2012-06-17 08:49:07 InfoboxMode: IBDM_Hidden - IBM_Playback - IBPM_Rec
2012-06-17 08:49:07 GUIMode stack: GM_Inactive - 
2012-06-17 08:49:55 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 08:50:11 GUIMode stack: GM_Inactive - 
2012-06-17 08:50:42 InfoboxMode: IBDM_InfoAndPVR - IBM_Playback - IBPM_Rec
2012-06-17 08:50:42 GUIMode stack: GM_Infobox - GM_Inactive - 
2012-06-17 08:50:42 Infobox: attaching to /mnt/hd/DataFiles/Navy CIS -  - 2012-06-10 20-15(DEC)-1.rec.inf
2012-06-17 08:50:43 GUIMode stack: GM_ExtInfo - GM_Infobox - GM_Inactive - 
2012-06-17 08:51:10 InfoboxMode: IBDM_Hidden - IBM_Playback - IBPM_Rec
2012-06-17 08:51:10 GUIMode stack: GM_Inactive - 
2012-06-17 09:49:09 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 09:49:14 GUIMode stack: GM_Setup - GM_Grid - GM_Inactive - 
2012-06-17 09:49:51 GUIMode stack: GM_Grid - GM_Inactive - 
2012-06-17 09:49:53 GUIMode stack: GM_Inactive -

Twilight · #66

jedenfalls werken sie um 7:00 noch ganz schön an den epg daten:

Code: Alles auswählen

Scanner: the version number of at least one data stream has changed (60: 18->19). Restarting scan for this transponder.

und das, wie es scheint, bei jedem transponder. wobei mir das umschalten bzw. die senderdaten fehlen, wohin er schaltet

twilight

FireBird · #67

Twilight hat geschrieben:wobei mir das umschalten bzw. die senderdaten fehlen, wohin er schaltet

Es wird nur der InfoChannel gescannt.

Twilight · #68

aber es geht doch darum das umgestellt wurde

dann hat er doch den receiver noch falsch eingestellt.

twilight

makiao · #69

Ja ich Scanne nur den Info Channel mit "multichanel". Die Sender die ich sehen will auf "nur anzeigen" und alle andern auf ignorieren.

Twilight · #70

ich dachte es wurde jetzt so umgestellt das du die einzelnen sender auf scan setzen kannst und den infochannel auf anzeigen setzt...

aber ich bin kein kabel experte.

twilight

Töppi · #71

So hatte ich das auch verstanden.

makiao · #72

Ja das wurde doch von den Experten hier wieder dementiert?

VaniQ · #73

Das mit dem normalen Transponder Scan wurde dementiert. Es war eine Falsch-Aussagen von LAL, der hat sich btw. weiter oben bereits entschuldigt.

Zum Thema Lücken: Ich mach den EPG-Scan jeweils 16:30. Es hat Lücken, da gebe ich dir Recht. Doch sind die reltativ selten und meist nur auf den englischen Sendern zu finden.

Ich habe jedoch vermutet, da diese Lücken er seit der "Verschlimmbesserung" der neuen EPG-Daten existiert, dass diese Lücken von der Cablecom her kommen und leider absolut nix mit dem Topf/SE zu tun haben.

Gruss, VaniQ :ballon:

makiao · #74

Ist wohl schon ein Phenomen der ersten Tage nach der Umstellung gewesen, in den letzten Tagen ist mir keine Lücke mehr aufgefallen.

Hatte letztens mal wieder einen Rekorder der Cablecom in den Fingern, mein Gott ist das Ding lahm und unübersichtlich, und Lahm. ABER AUCH LAHM

Ich las letztens von jemandem, "...wenn ich Guide drücke dann geht die auf..." ich musste kichern und dachte mir, ja du drückst, gehst einkaufen und kochst das Abendessen, und nach dem Abwasch ist die Guide zwar offen, aber die Favoriten gelöscht und richtig durch die Seiten scrollen kannst auch nicht

Ich bin sooo Dankbar für den Topf! Und allen Entwicklern und Bastlern und allen die hier ständig Hilfe leisten! Merci, Grazie, Danke.

camello · #75

Hallo, die neueste SE-Version 3.0 behebt das Problem mit den abgebrochenen Multichannel-Scans bei Cablecom (Welcome-Kanal).
Einfach im SE-Menü die Scan-Methode "Datei" auswählen.

Ich habe von Alex eine Vorab-Beta mit dieser Funktion nun über eine Woche erfolgreich getestet. Vielen Dank an Alex für die super Arbeit!!!!

Gruss Matthias

ameise999 · #76

hallo,

heute morgen um ca. 9.00h lief der epg-scan imme noch.

ich hatte von api auf datei umgestellt. kann dies die ursache sein

nachdem ich auf api zurückgestellt habe ist der scan durchgelaufen.

hilfe wäre nett.

gruss

BluField62 · #77

meiner stand auf Datei und war nach der gewohnten Zeit fertig

ameise999 · #78

BluField62 hat geschrieben:meiner stand auf Datei und war nach der gewohnten Zeit fertig

hmm, betrifft die einstellung datei evtl. nur cable besitzer?

gruss

FireBird · #79

Nein, der funktioniert auch für Sat-User.

ameise999 · #80

dann werde ich smartepg mal deinstallieren und neu installieren.
vielleicht ist hier ja etwas schief gelaufen.

gruss

TTD Forum

EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab

AW: EPG-Scan bricht ab