SE und Scan bei Cablecom user

Antworten
Benutzeravatar
WarmRed
Kabelversteher
Kabelversteher
Beiträge: 455
Registriert: Mo 17. Jan 2011, 20:54
Receivertyp: CRP-2401ci+

SE und Scan bei Cablecom user

#1

Beitrag von WarmRed » So 28. Aug 2011, 14:46

[quote="FireBird"]aber wenn Cablecom der Meinung ist, x MB in einer einzigen Tabelle übertragen zu müssen, kann ich leider nicht ausschließen, dass es irgendwann leider „Pech gehabt“ heißen wird.[/quote]
Ist ja nicht so dass es vorher nicht lief das Problem macht sich bei mir erst seit dem letzten Update bemerkbar, vorher lief es rund.




Sent from my iPhone using Tapatalk
Nach oben
Benutzeravatar
FireBird
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Beiträge: 28923
Registriert: Fr 9. Dez 2005, 09:59
Receivertyp: SRP-2401CI+ TFIR
vu+ Duo 4k
Wohnort: Wien

AW: Kleinere Fehler bzw. ungereimtheiten

#2

Beitrag von FireBird » So 28. Aug 2011, 14:50

SE wächst aber auch und irgendwann wird der Speicher zu knapp.
Nach oben
Benutzeravatar
WarmRed
Kabelversteher
Kabelversteher
Beiträge: 455
Registriert: Mo 17. Jan 2011, 20:54
Receivertyp: CRP-2401ci+

#3

Beitrag von WarmRed » So 28. Aug 2011, 15:39

würde es was bringen wenn man IQ Tuner vom Topf wirft und die SE IQ Tuner Version benützt.


Sent from my iPhone using Tapatalk
Nach oben
Benutzeravatar
longtom
Vollzeit-Guru
Vollzeit-Guru
Beiträge: 2141
Registriert: Mi 26. Apr 2006, 15:06
Receivertyp: CRP-2401+ CONAX mit 2TB WD Green
Receiverfirmware: 1.05.00 vom 26.3.2015
Wohnort: KO, AT mit kabelplus

AW: Kleinere Fehler bzw. ungereimtheiten

#4

Beitrag von longtom » So 28. Aug 2011, 15:40

[quote="WarmRed"]würde es was bringen wenn man IQ Tuner vom Topf wirft und die SE IQ Tuner Version benützt.


Sent from my iPhone using Tapatalk[/quote]

IQtuner brauchst nicht wennst SmartEPG nimmst.
CRP-2401+ CONAX mit 2TB WD Green, LG OLED 55C7V, AppleTV4, iPhone X, iPad Air 2, Logitech Harmony 650
1_TimerDiags; 2_SmartEPG TMS; 3_FastS*ip; 4_Automove; 5_TMSArchive; 6_lost+found
Nach oben
Benutzeravatar
Twilight
Zauberküchencheflehrling mit extra Butter
Zauberküchencheflehrling mit extra Butter
Beiträge: 64898
Registriert: Fr 9. Dez 2005, 09:17
Receivertyp: 1 x SRP 2100(TMS) TFIR und .1 x SRP 2410 M
Wohnort: Wien Umgebung

AW: Kleinere Fehler bzw. ungereimtheiten

#5

Beitrag von Twilight » So 28. Aug 2011, 16:40

WarmRed hat geschrieben:würde es was bringen wenn man IQ Tuner vom Topf wirft und die SE IQ Tuner Version benützt.

andere frage: was bringt es es nicht zu tun :u:

twilight
Nach oben
Benutzeravatar
WarmRed
Kabelversteher
Kabelversteher
Beiträge: 455
Registriert: Mo 17. Jan 2011, 20:54
Receivertyp: CRP-2401ci+

AW: Kleinere Fehler bzw. ungereimtheiten

#6

Beitrag von WarmRed » So 28. Aug 2011, 17:16

[quote="longtom"]IQtuner brauchst nicht wennst SmartEPG nimmst.[/quote]

Die Frage ist, ob es weniger Speicherressourcen benötigt wenn man den Smart EPG eigenen IQ Tuner verwendet als den des eigenständigen TAPs.

Wäre es rein hypothetisch möglich von der Festplatte Speicherressourcen den TAPs zu Verfügung zu stellen? Bei den Dreamboxen ist das ja über die SWAP Dateien möglich. Ob die Rahmenbedienungen auf dem Topf dafür ebenfalls gegeben sind weiss ich natürlich nicht.
Nach oben
jutz
Benutzer
Benutzer
Beiträge: 70
Registriert: Do 21. Apr 2011, 14:14
Receivertyp: CRP2401CI+
Wohnort: Wildberg ZH

AW: Kleinere Fehler bzw. ungereimtheiten

#7

Beitrag von jutz » So 28. Aug 2011, 17:48

Kann man den automatischen Scan deaktivieren? Für mich wäre es o.k. von Zeit zu Zeit den manuellen Scan durchzuführen. So hab ich nicht jeweils eine leere EPG Datenbank und keine Meldung "die EPG Datenbank ist leer", damit ist meine Frau schon etwas überfordert.
Nach oben
Benutzeravatar
Twilight
Zauberküchencheflehrling mit extra Butter
Zauberküchencheflehrling mit extra Butter
Beiträge: 64898
Registriert: Fr 9. Dez 2005, 09:17
Receivertyp: 1 x SRP 2100(TMS) TFIR und .1 x SRP 2410 M
Wohnort: Wien Umgebung

AW: Kleinere Fehler bzw. ungereimtheiten

#8

Beitrag von Twilight » So 28. Aug 2011, 18:31

nein, man kann den automatischen scan nicht deaktivieren :thinker:

und da das tap in se drin ist, wird es auch speicher verbraten wenn es nicht gebraucht wird, weil es extra wo läuft.

twilight
Nach oben
Benutzeravatar
WarmRed
Kabelversteher
Kabelversteher
Beiträge: 455
Registriert: Mo 17. Jan 2011, 20:54
Receivertyp: CRP-2401ci+

#9

Beitrag von WarmRed » Mo 29. Aug 2011, 09:41

bei mir war die Box abgeschälten, jedoch ohne EPG Daten, Log folgt noch.


Sent from my iPhone using Tapatalk
Nach oben
Benutzeravatar
Isarwolf
Vielantworter
Vielantworter
Beiträge: 825
Registriert: Fr 8. Dez 2006, 17:19
Receivertyp: TF5200PVRC 08.12.2006
CRP 2401 C+ 21.05.2011
CRP 2401 C+ 24.02.2017
Receiverfirmware: TF5200 01.12.2006
CRP 2401 C+ 42031_2012Sept14
Wohnort: KDG Oberbayern

AW: Kleinere Fehler bzw. ungereimtheiten

#10

Beitrag von Isarwolf » Mo 29. Aug 2011, 14:55

Ich vermute, daß die Probleme im weitesten Sinne mit der IFA 2011 zu tun haben. Die Fernsehanstalten sind dabei irgendetwas bei den EPG-Daten umzustellen. Vielleicht im Zusammenhang mit HbbTV.
Ich komme auf diesen Verdacht, weil mein Zweitreceiver (TF 5200 mit iTina) neuerdings zwanzig statt acht Minuten für den Scan braucht.

Gruß

Hannes
CRP-2401CI+: Autostart: 'TimerDiags V3.4g' 'AutoExtender' 'SmartEPG_TMS V7.0e' 'Automove V2.1 Beta 3' 'BetterVideoText V0.33' 'FastSkip TMS 3.7' 'INFplus 1.2 Beta 3' 'Liza V1.6' 'QStart 1.2' 'RebuildNAV/RecCopy V5.3' 'SmartFiler_TMS 3.0' 'TMSDisplay V2.3a' 'TMSRemote V4.1' 'Webcontrol 2.0' 'lost+found V2.0'
TF5200: | iTina 1.04 L3 | Improbox t3 a.5 | Filer 2.30 |
Nach oben
Benutzeravatar
WarmRed
Kabelversteher
Kabelversteher
Beiträge: 455
Registriert: Mo 17. Jan 2011, 20:54
Receivertyp: CRP-2401ci+

AW: Kleinere Fehler bzw. ungereimtheiten

#11

Beitrag von WarmRed » Mo 29. Aug 2011, 17:04

so ich habe mal ein Log von mir:

Code: Alles auswählen

2011-08-29 04:19:57 ===================================================
2011-08-29 04:19:57 SmartEPG_TMS  V0.9.7e Beta
2011-08-29 04:19:57 SysID=42031(CRP-2401CI+), Firmware=0x0100
2011-08-29 04:19:57 TimeZone = 60 min (+DST)
2011-08-29 04:19:58 Network: Listening on TCP port 1417
2011-08-29 04:19:58 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-29 04:19:58 ScanTimerMonitor: ScanTimer has been set to 2011-08-29 04:59
2011-08-29 04:19:58 LogoManager: 5783 cache records have been loaded
2011-08-29 04:19:58 IQTuner TAP is running
2011-08-29 04:19:59 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'F'
2011-08-29 04:19:59 FileDB: failed to open 'FileDB: failed to open 'FileD'
2011-08-29 04:19:59 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: f'
2011-08-29 04:19:59 FileDB: failed to open 'FileDB: failed to open 'FileDB: fail'
2011-08-29 04:19:59 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: faile'
2011-08-29 04:20:50 Network: Shutdown event
2011-08-29 04:20:50 Network: Closing server socket
2011-08-29 04:20:50 TimerDB: deleting DB timer '00 'SmartEPG' (2011-08-29 05:00/2')'
2011-08-29 04:20:51 SE shutdown finished
2011-08-29 04:59:26 ===================================================
2011-08-29 04:59:26 SmartEPG_TMS  V0.9.7e Beta
2011-08-29 04:59:26 SysID=42031(CRP-2401CI+), Firmware=0x0100
2011-08-29 04:59:26 TimeZone = 60 min (+DST)
2011-08-29 04:59:27 Network: Listening on TCP port 1417
2011-08-29 04:59:27 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-29 04:59:27 ScanTimerMonitor: ScanTimer has been set to 2011-08-30 04:59
2011-08-29 04:59:27 LogoManager: 5783 cache records have been loaded
2011-08-29 04:59:27 TimerDB: DBTimer 'SmartEPG': start time has changed from '2011-08-29 05:00' to '2011-08-30 05:00'
2011-08-29 04:59:27 IQTuner TAP is running
2011-08-29 04:59:28 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'F'
2011-08-29 04:59:28 FileDB: failed to open 'FileDB: failed to open 'FileD'
2011-08-29 04:59:28 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: f'
2011-08-29 04:59:28 FileDB: failed to open 'FileDB: failed to open 'FileDB: fail'
2011-08-29 04:59:28 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: faile'
2011-08-29 16:03:38 ===================================================
2011-08-29 16:03:38 SmartEPG_TMS  V0.9.7e Beta
2011-08-29 16:03:38 SysID=42031(CRP-2401CI+), Firmware=0x0100
2011-08-29 16:03:38 TimeZone = 60 min (+DST)
2011-08-29 16:03:38 Network: Listening on TCP port 1417
2011-08-29 16:03:38 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-29 16:03:39 ScanTimerMonitor: ScanTimer has been set to 2011-08-30 04:59
2011-08-29 16:03:39 LogoManager: 5783 cache records have been loaded
2011-08-29 16:03:39 IQTuner TAP is running
2011-08-29 16:03:39 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'F'
2011-08-29 16:03:39 FileDB: failed to open 'FileDB: failed to open 'FileD'
2011-08-29 16:03:39 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: f'
2011-08-29 16:03:40 FileDB: failed to open 'FileDB: failed to open 'FileDB: fail'
2011-08-29 16:03:40 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: faile'
2011-08-29 16:10:27 Network: Shutdown event
2011-08-29 16:10:27 Network: Closing server socket
2011-08-29 16:10:27 TimerDB: deleting DB timer '00 'SmartEPG' (2011-08-30 05:00/2')'
2011-08-29 16:10:28 SE shutdown finished
2011-08-29 16:11:05 ===================================================
2011-08-29 16:11:05 SmartEPG_TMS  V0.9.7e Beta
2011-08-29 16:11:05 SysID=42031(CRP-2401CI+), Firmware=0x0100
2011-08-29 16:11:05 TimeZone = 60 min (+DST)
2011-08-29 16:11:06 Network: Listening on TCP port 1417
2011-08-29 16:11:06 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-29 16:11:06 ScanTimerMonitor: ScanTimer has been set to 2011-08-30 04:59
2011-08-29 16:11:06 LogoManager: 5783 cache records have been loaded
2011-08-29 16:11:06 IQTuner TAP is running
2011-08-29 16:11:07 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'F'
2011-08-29 16:11:07 FileDB: failed to open 'FileDB: failed to open 'FileD'
2011-08-29 16:11:07 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: f'
2011-08-29 16:11:07 FileDB: failed to open 'FileDB: failed to open 'FileDB: fail'
2011-08-29 16:11:07 FileDB: failed to open 'FileDB: failed to open 'FileDB: failed to open 'FileDB: faile'
2011-08-29 16:11:57 # of transponders to be scanned = 1
2011-08-29 16:11:57 Scanner: switching to transponder 32884 (Welcome)
2011-08-29 16:11:57 Scanner: launching EIT filter for table 0x4e
2011-08-29 16:11:57 Scanner: launching EIT filter for table 0x4f
2011-08-29 16:11:57 Scanner: launching EIT filter for table 0x50
2011-08-29 16:11:57 Scanner: launching EIT filter for table 0x60
2011-08-29 16:11:59 Scanner: available memory = 29832kB
2011-08-29 16:11:59 Scanner: launching EIT filter for table 0x61
2011-08-29 16:12:00 Scanner: reserved memory = 128 kB
2011-08-29 16:12:00 Scanner: available memory = 29694kB
2011-08-29 16:12:00 Scanner: launching EIT filter for table 0x51
2011-08-29 16:12:01 Scanner: reserved memory = 256 kB
2011-08-29 16:12:01 Scanner: reserved memory = 385 kB
2011-08-29 16:12:02 Scanner: reserved memory = 512 kB
2011-08-29 16:12:03 Scanner: reserved memory = 640 kB
2011-08-29 16:12:03 Scanner: reserved memory = 768 kB
2011-08-29 16:12:04 Scanner: reserved memory = 897 kB
2011-08-29 16:12:04 Scanner: reserved memory = 1024 kB
2011-08-29 16:12:05 Scanner: available memory = 28670kB
2011-08-29 16:12:05 Scanner: reserved memory = 1152 kB
2011-08-29 16:12:06 Scanner: reserved memory = 1282 kB
2011-08-29 16:12:06 Scanner: reserved memory = 1408 kB
2011-08-29 16:12:07 Scanner: reserved memory = 1537 kB
2011-08-29 16:12:08 Scanner: reserved memory = 1664 kB
2011-08-29 16:12:08 Scanner: reserved memory = 1792 kB
2011-08-29 16:12:09 Scanner: reserved memory = 1921 kB
2011-08-29 16:12:09 Scanner: reserved memory = 2048 kB
2011-08-29 16:12:10 Scanner: available memory = 27646kB
2011-08-29 16:12:10 Scanner: reserved memory = 2178 kB
2011-08-29 16:12:11 Scanner: reserved memory = 2305 kB
2011-08-29 16:12:11 Scanner: reserved memory = 2432 kB
2011-08-29 16:12:12 Scanner: reserved memory = 2561 kB
2011-08-29 16:12:13 Scanner: reserved memory = 2689 kB
2011-08-29 16:12:14 Scanner: reserved memory = 2816 kB
2011-08-29 16:12:14 Scanner: reserved memory = 2944 kB
2011-08-29 16:12:15 Scanner: reserved memory = 3072 kB
2011-08-29 16:12:15 Scanner: available memory = 26621kB
2011-08-29 16:12:16 Scanner: reserved memory = 3201 kB
2011-08-29 16:12:16 Scanner: reserved memory = 3328 kB
2011-08-29 16:12:17 Scanner: reserved memory = 3456 kB
2011-08-29 16:12:18 Scanner: reserved memory = 3585 kB
2011-08-29 16:12:18 Scanner: reserved memory = 3712 kB
2011-08-29 16:12:19 Scanner: reserved memory = 3840 kB
2011-08-29 16:12:20 Scanner: reserved memory = 3968 kB
2011-08-29 16:12:20 Scanner: reserved memory = 4096 kB
2011-08-29 16:12:21 Scanner: available memory = 25599kB
2011-08-29 16:12:21 Scanner: available memory = 25600kB
2011-08-29 16:12:21 Scanner: available memory = 25598kB
2011-08-29 16:12:21 Scanner: reserved memory = 4226 kB
2011-08-29 16:12:22 Scanner: reserved memory = 4353 kB
2011-08-29 16:12:23 Scanner: reserved memory = 4480 kB
2011-08-29 16:12:23 Scanner: reserved memory = 4608 kB
2011-08-29 16:12:24 Scanner: reserved memory = 4736 kB
2011-08-29 16:12:25 Scanner: reserved memory = 4865 kB
2011-08-29 16:12:25 Scanner: reserved memory = 4992 kB
2011-08-29 16:12:26 Scanner: available memory = 24573kB
2011-08-29 16:12:26 Scanner: reserved memory = 5120 kB
2011-08-29 16:12:27 Scanner: reserved memory = 5249 kB
2011-08-29 16:12:27 Scanner: reserved memory = 5377 kB
2011-08-29 16:12:28 Scanner: reserved memory = 5504 kB
2011-08-29 16:12:29 Scanner: reserved memory = 5632 kB
2011-08-29 16:12:29 Scanner: reserved memory = 5760 kB
2011-08-29 16:12:30 Scanner: reserved memory = 5888 kB
2011-08-29 16:12:31 Scanner: reserved memory = 6017 kB
2011-08-29 16:12:31 Scanner: available memory = 23551kB
2011-08-29 16:12:31 Scanner: reserved memory = 6144 kB
2011-08-29 16:12:32 Scanner: reserved memory = 6272 kB
2011-08-29 16:12:33 Scanner: reserved memory = 6400 kB
2011-08-29 16:12:34 Scanner: reserved memory = 6529 kB
2011-08-29 16:12:34 Scanner: reserved memory = 6656 kB
2011-08-29 16:12:35 Scanner: reserved memory = 6786 kB
2011-08-29 16:12:36 Scanner: reserved memory = 6912 kB
2011-08-29 16:12:36 Scanner: reserved memory = 7040 kB
2011-08-29 16:12:37 Scanner: available memory = 22524kB
2011-08-29 16:12:37 Scanner: reserved memory = 7168 kB
2011-08-29 16:12:38 Scanner: reserved memory = 7296 kB
2011-08-29 16:12:38 Scanner: reserved memory = 7426 kB
2011-08-29 16:12:39 Scanner: reserved memory = 7552 kB
2011-08-29 16:12:40 Scanner: reserved memory = 7681 kB
2011-08-29 16:12:41 Scanner: reserved memory = 7809 kB
2011-08-29 16:12:41 Scanner: reserved memory = 7936 kB
2011-08-29 16:12:42 Scanner: reserved memory = 8064 kB
2011-08-29 16:12:42 Scanner: available memory = 21503kB
2011-08-29 16:12:43 Scanner: reserved memory = 8192 kB
2011-08-29 16:12:43 Scanner: reserved memory = 8322 kB
2011-08-29 16:12:44 Scanner: reserved memory = 8450 kB
2011-08-29 16:12:45 Scanner: reserved memory = 8576 kB
2011-08-29 16:12:45 Scanner: reserved memory = 8704 kB
2011-08-29 16:12:46 Scanner: reserved memory = 8832 kB
2011-08-29 16:12:47 Scanner: reserved memory = 8960 kB
2011-08-29 16:12:47 Scanner: reserved memory = 9088 kB
2011-08-29 16:12:47 Scanner: available memory = 20479kB
2011-08-29 16:12:48 Scanner: reserved memory = 9217 kB
2011-08-29 16:12:49 Scanner: reserved memory = 9344 kB
2011-08-29 16:12:50 Scanner: reserved memory = 9472 kB
2011-08-29 16:12:50 Scanner: reserved memory = 9601 kB
2011-08-29 16:12:51 Scanner: reserved memory = 9728 kB
2011-08-29 16:12:52 Scanner: reserved memory = 9856 kB
2011-08-29 16:12:52 Scanner: reserved memory = 9984 kB
2011-08-29 16:12:53 Scanner: available memory = 19455kB
2011-08-29 16:12:53 Scanner: reserved memory = 10113 kB
2011-08-29 16:12:54 Scanner: reserved memory = 10240 kB
2011-08-29 16:12:54 Scanner: reserved memory = 10368 kB
2011-08-29 16:12:55 Scanner: reserved memory = 10496 kB
2011-08-29 16:12:56 Scanner: reserved memory = 10624 kB
2011-08-29 16:12:57 Scanner: reserved memory = 10752 kB
2011-08-29 16:12:57 Scanner: reserved memory = 10880 kB
2011-08-29 16:12:58 Scanner: available memory = 18431kB
2011-08-29 16:12:58 Scanner: reserved memory = 11008 kB
2011-08-29 16:12:59 Scanner: reserved memory = 11136 kB
2011-08-29 16:13:00 Scanner: reserved memory = 11264 kB
2011-08-29 16:13:01 Scanner: reserved memory = 11394 kB
2011-08-29 16:13:02 Scanner: reserved memory = 11521 kB
2011-08-29 16:13:03 Scanner: reserved memory = 11649 kB
2011-08-29 16:13:03 Scanner: reserved memory = 11777 kB
2011-08-29 16:13:04 Scanner: available memory = 17407kB
2011-08-29 16:13:04 Scanner: reserved memory = 11904 kB
2011-08-29 16:13:05 Scanner: reserved memory = 12032 kB
2011-08-29 16:13:06 Scanner: reserved memory = 12160 kB
2011-08-29 16:13:07 Scanner: reserved memory = 12288 kB
2011-08-29 16:13:07 Scanner: reserved memory = 12416 kB
2011-08-29 16:13:08 Scanner: reserved memory = 12544 kB
2011-08-29 16:13:09 Scanner: reserved memory = 12672 kB
2011-08-29 16:13:10 Scanner: reserved memory = 12801 kB
2011-08-29 16:13:10 Scanner: available memory = 16382kB
2011-08-29 16:13:11 Scanner: reserved memory = 12928 kB
2011-08-29 16:13:11 Scanner: reserved memory = 13056 kB
2011-08-29 16:13:12 Scanner: reserved memory = 13185 kB
2011-08-29 16:13:13 Scanner: reserved memory = 13313 kB
2011-08-29 16:13:14 Scanner: reserved memory = 13441 kB
2011-08-29 16:13:15 Scanner: reserved memory = 13568 kB
2011-08-29 16:13:16 Scanner: reserved memory = 13699 kB
2011-08-29 16:13:16 Scanner: reserved memory = 13826 kB
2011-08-29 16:13:17 Scanner: available memory = 15359kB
2011-08-29 16:13:17 Scanner: reserved memory = 13952 kB
2011-08-29 16:13:18 Scanner: reserved memory = 14080 kB
2011-08-29 16:13:19 Scanner: reserved memory = 14210 kB
2011-08-29 16:13:20 Scanner: reserved memory = 14336 kB
2011-08-29 16:13:21 Scanner: reserved memory = 14464 kB
2011-08-29 16:13:22 Scanner: reserved memory = 14592 kB
2011-08-29 16:13:23 Scanner: reserved memory = 14721 kB
2011-08-29 16:13:24 Scanner: reserved memory = 14850 kB
2011-08-29 16:13:24 Scanner: available memory = 14335kB
2011-08-29 16:13:24 Scanner: reserved memory = 14977 kB
2011-08-29 16:13:25 Scanner: reserved memory = 15105 kB
2011-08-29 16:13:26 Scanner: reserved memory = 15233 kB
2011-08-29 16:13:27 Scanner: reserved memory = 15360 kB
2011-08-29 16:13:28 Scanner: reserved memory = 15489 kB
2011-08-29 16:13:29 Scanner: reserved memory = 15617 kB
2011-08-29 16:13:30 Scanner: reserved memory = 15744 kB
2011-08-29 16:13:31 Scanner: available memory = 13311kB
2011-08-29 16:13:31 Scanner: reserved memory = 15873 kB
2011-08-29 16:13:33 Scanner: reserved memory = 16000 kB
2011-08-29 16:13:35 Scanner: reserved memory = 16131 kB
2011-08-29 16:13:38 Scanner: reserved memory = 16256 kB
2011-08-29 16:13:40 Scanner: reserved memory = 16385 kB
2011-08-29 16:13:42 Scanner: reserved memory = 16514 kB
2011-08-29 16:13:45 Scanner: reserved memory = 16641 kB
2011-08-29 16:13:47 Scanner: reserved memory = 16768 kB
2011-08-29 16:13:49 Scanner: available memory = 12287kB
2011-08-29 16:13:49 Scanner: available memory = 12288kB
2011-08-29 16:13:49 Scanner: available memory = 12287kB
2011-08-29 16:13:49 Scanner: available memory = 12290kB
2011-08-29 16:13:49 Scanner: available memory = 12287kB
2011-08-29 16:13:50 Scanner: reserved memory = 16896 kB
2011-08-29 16:13:52 Scanner: reserved memory = 17024 kB
2011-08-29 16:13:55 Scanner: reserved memory = 17153 kB
2011-08-29 16:13:57 Scanner: reserved memory = 17280 kB
2011-08-29 16:14:00 Scanner: reserved memory = 17408 kB
2011-08-29 16:14:02 Scanner: reserved memory = 17536 kB
2011-08-29 16:14:05 Scanner: reserved memory = 17664 kB
2011-08-29 16:14:08 Scanner: reserved memory = 17792 kB
2011-08-29 16:14:10 Scanner: available memory = 11263kB
2011-08-29 16:14:11 Scanner: reserved memory = 17921 kB
2011-08-29 16:14:14 Scanner: reserved memory = 18048 kB
2011-08-29 16:14:16 Scanner: reserved memory = 18177 kB
2011-08-29 16:14:26 Scanner: still expecting 2487 of 20544 sections. Waiting for 1 minute
2011-08-29 16:14:48 Scanner: reserved memory = 18304 kB
2011-08-29 16:14:57 Scanner: reserved memory = 18432 kB
2011-08-29 16:15:11 Scanner: still expecting 2127 of 20544 sections. Waiting for 1 minute
2011-08-29 16:15:26 Scanner: reserved memory = 18560 kB
2011-08-29 16:15:41 Scanner: reserved memory = 18689 kB
2011-08-29 16:15:54 Scanner: reserved memory = 18816 kB
2011-08-29 16:15:56 Scanner: available memory = 10239kB
2011-08-29 16:15:56 Scanner: available memory = 10240kB
2011-08-29 16:15:56 Scanner: available memory = 10238kB
2011-08-29 16:15:56 Scanner: available memory = 10240kB
2011-08-29 16:15:56 Scanner: available memory = 10238kB
2011-08-29 16:15:58 Scanner: available memory = 10240kB
2011-08-29 16:15:59 Scanner: available memory = 10239kB
2011-08-29 16:15:59 Scanner: available memory = 10240kB
2011-08-29 16:15:59 Scanner: available memory = 10238kB
2011-08-29 16:16:06 Scanner: reserved memory = 18945 kB
2011-08-29 16:16:14 Scanner: reserved memory = 19072 kB
2011-08-29 16:16:22 Scanner: reserved memory = 19200 kB
2011-08-29 16:16:29 Scanner: reserved memory = 19328 kB
2011-08-29 16:16:41 Scanner: still expecting 1118 of 20544 sections. Waiting for 1 minute
2011-08-29 16:18:01 Scanner: reserved memory = 19457 kB
2011-08-29 16:18:35 Scanner: reserved memory = 19584 kB
2011-08-29 16:18:56 Scanner: still expecting 725 of 20544 sections. Waiting for 1 minute
2011-08-29 16:19:40 Scanner: still expecting 681 of 20544 sections. Waiting for 1 minute
2011-08-29 16:20:18 Scanner: reserved memory = 19713 kB
2011-08-29 16:20:57 Scanner: available memory = 9215kB
2011-08-29 16:20:57 Scanner: available memory = 9216kB
2011-08-29 16:20:57 Scanner: available memory = 9215kB
2011-08-29 16:20:57 Scanner: available memory = 9216kB
2011-08-29 16:20:57 Scanner: available memory = 9212kB
2011-08-29 16:20:57 Scanner: available memory = 9218kB
2011-08-29 16:20:57 Scanner: available memory = 9214kB
2011-08-29 16:20:57 Scanner: available memory = 9217kB
2011-08-29 16:20:57 Scanner: available memory = 9215kB
2011-08-29 16:20:57 Scanner: available memory = 9219kB
2011-08-29 16:20:57 Scanner: available memory = 9214kB
2011-08-29 16:20:57 Scanner: available memory = 9216kB
2011-08-29 16:20:58 Scanner: available memory = 9214kB
2011-08-29 16:20:58 Scanner: available memory = 9216kB
2011-08-29 16:20:58 Scanner: available memory = 9214kB
2011-08-29 16:20:58 Scanner: available memory = 9217kB
2011-08-29 16:20:58 Scanner: available memory = 9214kB
2011-08-29 16:20:58 Scanner: available memory = 9217kB
2011-08-29 16:20:58 Scanner: available memory = 9215kB
2011-08-29 16:20:58 Scanner: available memory = 9216kB
2011-08-29 16:20:58 Scanner: available memory = 9212kB
2011-08-29 16:21:00 Scanner: reserved memory = 19841 kB
2011-08-29 16:21:06 Scanner: available memory = 9216kB
2011-08-29 16:21:06 Scanner: available memory = 9215kB
2011-08-29 16:21:06 Scanner: available memory = 9216kB
2011-08-29 16:21:06 Scanner: available memory = 9215kB
2011-08-29 16:21:06 Scanner: available memory = 9216kB
2011-08-29 16:21:06 Scanner: available memory = 9215kB
2011-08-29 16:21:06 Scanner: available memory = 9216kB
2011-08-29 16:21:07 Scanner: available memory = 9215kB
2011-08-29 16:21:07 Scanner: available memory = 9216kB
2011-08-29 16:21:07 Scanner: available memory = 9213kB
2011-08-29 16:21:07 Scanner: available memory = 9218kB
2011-08-29 16:21:07 Scanner: available memory = 9214kB
2011-08-29 16:21:07 Scanner: available memory = 9217kB
2011-08-29 16:21:07 Scanner: available memory = 9214kB
2011-08-29 16:21:07 Scanner: available memory = 9217kB
2011-08-29 16:21:07 Scanner: available memory = 9215kB
2011-08-29 16:21:07 Scanner: available memory = 9216kB
2011-08-29 16:21:07 Scanner: available memory = 9213kB
2011-08-29 16:21:11 Scanner: still expecting 440 of 20544 sections. Waiting for 1 minute
2011-08-29 16:21:13 Scanner: available memory = 9216kB
2011-08-29 16:21:13 Scanner: available memory = 9215kB
2011-08-29 16:21:13 Scanner: available memory = 9216kB
2011-08-29 16:21:13 Scanner: available memory = 9215kB
2011-08-29 16:21:13 Scanner: available memory = 9216kB
2011-08-29 16:21:13 Scanner: available memory = 9214kB
2011-08-29 16:21:13 Scanner: available memory = 9216kB
2011-08-29 16:21:14 Scanner: available memory = 9214kB
2011-08-29 16:21:14 Scanner: available memory = 9216kB
2011-08-29 16:21:14 Scanner: available memory = 9215kB
2011-08-29 16:21:14 Scanner: available memory = 9216kB
2011-08-29 16:21:15 Scanner: available memory = 9215kB
2011-08-29 16:21:15 Scanner: available memory = 9217kB
2011-08-29 16:21:15 Scanner: available memory = 9213kB
2011-08-29 16:21:15 Scanner: available memory = 9216kB
2011-08-29 16:21:15 Scanner: available memory = 9215kB
2011-08-29 16:21:15 Scanner: available memory = 9216kB
2011-08-29 16:21:15 Scanner: available memory = 9212kB
2011-08-29 16:21:16 Scanner: available memory = 9217kB
2011-08-29 16:21:17 Scanner: available memory = 9215kB
2011-08-29 16:21:17 Scanner: available memory = 9216kB
2011-08-29 16:21:17 Scanner: available memory = 9215kB
2011-08-29 16:21:17 Scanner: available memory = 9216kB
2011-08-29 16:21:17 Scanner: available memory = 9215kB
2011-08-29 16:21:17 Scanner: available memory = 9217kB
2011-08-29 16:21:17 Scanner: available memory = 9215kB
2011-08-29 16:21:17 Scanner: available memory = 9216kB
2011-08-29 16:21:18 Scanner: available memory = 9215kB
2011-08-29 16:21:20 Scanner: available memory = 9216kB
2011-08-29 16:21:20 Scanner: available memory = 9215kB
2011-08-29 16:21:21 Scanner: available memory = 9216kB
2011-08-29 16:21:21 Scanner: available memory = 9214kB
2011-08-29 16:21:21 Scanner: available memory = 9216kB
2011-08-29 16:21:21 Scanner: available memory = 9213kB
2011-08-29 16:21:21 Scanner: available memory = 9216kB
2011-08-29 16:21:21 Scanner: available memory = 9215kB
2011-08-29 16:21:22 Scanner: available memory = 9217kB
2011-08-29 16:21:22 Scanner: available memory = 9215kB
2011-08-29 16:21:24 Scanner: available memory = 9217kB
2011-08-29 16:21:24 Scanner: available memory = 9215kB
2011-08-29 16:21:24 Scanner: available memory = 9216kB
2011-08-29 16:21:24 Scanner: available memory = 9215kB
2011-08-29 16:21:24 Scanner: available memory = 9216kB
2011-08-29 16:21:24 Scanner: available memory = 9213kB
2011-08-29 16:21:25 Scanner: available memory = 9216kB
2011-08-29 16:21:25 Scanner: available memory = 9212kB
2011-08-29 16:21:25 Scanner: available memory = 9217kB
2011-08-29 16:21:25 Scanner: available memory = 9215kB
2011-08-29 16:21:25 Scanner: available memory = 9216kB
2011-08-29 16:21:25 Scanner: available memory = 9215kB
2011-08-29 16:21:25 Scanner: available memory = 9216kB
2011-08-29 16:21:26 Scanner: available memory = 9214kB
2011-08-29 16:21:26 Scanner: available memory = 9216kB
2011-08-29 16:21:26 Scanner: available memory = 9215kB
2011-08-29 16:21:26 Scanner: available memory = 9216kB
2011-08-29 16:21:26 Scanner: available memory = 9215kB
2011-08-29 16:21:26 Scanner: available memory = 9216kB
2011-08-29 16:21:27 Scanner: available memory = 9215kB
2011-08-29 16:21:27 Scanner: available memory = 9216kB
2011-08-29 16:21:27 Scanner: available memory = 9215kB
2011-08-29 16:21:27 Scanner: available memory = 9216kB
2011-08-29 16:21:27 Scanner: available memory = 9213kB
2011-08-29 16:21:29 Scanner: available memory = 9217kB
2011-08-29 16:21:29 Scanner: available memory = 9214kB
2011-08-29 16:21:29 Scanner: available memory = 9217kB
2011-08-29 16:21:30 Scanner: available memory = 9213kB
2011-08-29 16:21:33 Scanner: available memory = 9217kB
2011-08-29 16:21:33 Scanner: available memory = 9213kB
2011-08-29 16:21:37 Scanner: available memory = 9216kB
2011-08-29 16:21:39 Scanner: available memory = 9215kB
2011-08-29 16:21:40 Scanner: available memory = 9217kB
2011-08-29 16:21:40 Scanner: available memory = 9215kB
2011-08-29 16:21:40 Scanner: available memory = 9217kB
2011-08-29 16:21:40 Scanner: available memory = 9215kB
2011-08-29 16:21:40 Scanner: available memory = 9219kB
2011-08-29 16:21:41 Scanner: available memory = 9215kB
2011-08-29 16:21:41 Scanner: available memory = 9217kB
2011-08-29 16:21:41 Scanner: available memory = 9214kB
2011-08-29 16:21:41 Scanner: available memory = 9216kB
2011-08-29 16:21:41 Scanner: available memory = 9212kB
2011-08-29 16:21:41 Scanner: available memory = 9216kB
2011-08-29 16:21:42 Scanner: available memory = 9214kB
2011-08-29 16:21:42 Scanner: available memory = 9216kB
2011-08-29 16:21:42 Scanner: available memory = 9213kB
2011-08-29 16:21:43 Scanner: available memory = 9216kB
2011-08-29 16:21:43 Scanner: available memory = 9213kB
2011-08-29 16:21:55 Scanner: available memory = 9216kB
2011-08-29 16:21:55 Scanner: available memory = 9215kB
2011-08-29 16:21:56 Scanner: available memory = 9217kB
2011-08-29 16:21:56 Scanner: available memory = 9215kB
2011-08-29 16:21:56 Scanner: available memory = 9216kB
2011-08-29 16:21:57 Scanner: available memory = 9214kB
2011-08-29 16:21:57 Scanner: available memory = 9216kB
2011-08-29 16:21:57 Scanner: available memory = 9212kB
2011-08-29 16:21:57 Scanner: available memory = 9216kB
2011-08-29 16:21:57 Scanner: available memory = 9214kB
2011-08-29 16:21:57 Scanner: available memory = 9216kB
2011-08-29 16:21:57 Scanner: available memory = 9215kB
2011-08-29 16:21:57 Scanner: available memory = 9217kB
2011-08-29 16:21:57 Scanner: available memory = 9214kB
2011-08-29 16:21:57 Scanner: available memory = 9216kB
2011-08-29 16:21:57 Scanner: available memory = 9215kB
2011-08-29 16:21:57 Scan of this transponder terminated because of a 10 minutes timeout. Got 97%
2011-08-29 16:22:09 Scanner: 20104 EIT packets received
2011-08-29 16:22:31 Processing 1 eit files
2011-08-29 16:29:27 Scanner: Total events    =    87865
2011-08-29 16:29:27 Scanner: Filtered events =    41309
2011-08-29 16:29:28 Scanner: 41309 events found
2011-08-29 16:29:28 Performing EPG search
2011-08-29 16:29:28 TimerDB: deleting DB timer '00 'SmartEPG' (2011-08-30 05:00/2')'
2011-08-29 16:29:28 TimerDB: deleting DB timer '00 'SmartEPG' (2011-08-30 05:00/2')'
2011-08-29 16:23:29 ===================================================
2011-08-29 16:23:29 SmartEPG_TMS  V0.9.7e Beta
2011-08-29 16:23:29 SysID=42031(CRP-2401CI+), Firmware=0x0100
2011-08-29 16:23:29 TimeZone = 60 min (+DST)
2011-08-29 16:23:29 Network: Listening on TCP port 1417
2011-08-29 16:23:29 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-29 16:23:29 ScanTimerMonitor: ScanTimer has been set to 2011-08-30 04:59
2011-08-29 16:23:30 LogoManager: 5783 cache records have been loaded
2011-08-29 16:23:30 TimerDB: Flash timer 'SmartEPG.rec' has an ID but no corresponding DB timer
2011-08-29 16:23:30 TimerDB: Timer '01 'SmartEPG' (2011-08-30 04:59/3')' has been added to the db
2011-08-29 16:23:30 TimerDB: DBTimer '00 'SmartEPG' (2011-08-30 05:00/2')' not found in the flash, refreshing flash
2011-08-29 16:23:30 TimerDB: deleting DB timer '00 'SmartEPG' (2011-08-30 04:59/3')'
2011-08-29 16:23:30 TimerDB: deleting DB timer '01 'SmartEPG' (2011-08-30 05:00/2')'
2011-08-29 16:23:30 IQTuner TAP is running
2011-08-29 16:32:44 Processing 1 eit files
2011-08-29 16:39:49 Scanner: Total events    =    87865
2011-08-29 16:39:49 Scanner: Filtered events =    41309
2011-08-29 16:39:50 41309 events found
Zuletzt geändert von WarmRed am Mo 29. Aug 2011, 17:07, insgesamt 1-mal geändert.
Nach oben
Benutzeravatar
FireBird
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Beiträge: 28923
Registriert: Fr 9. Dez 2005, 09:59
Receivertyp: SRP-2401CI+ TFIR
vu+ Duo 4k
Wohnort: Wien

AW: Kleinere Fehler bzw. ungereimtheiten

#12

Beitrag von FireBird » Mo 29. Aug 2011, 17:16

Sieht für mich gut aus. Für Dich auch?
Nach oben
Benutzeravatar
WarmRed
Kabelversteher
Kabelversteher
Beiträge: 455
Registriert: Mo 17. Jan 2011, 20:54
Receivertyp: CRP-2401ci+

AW: Kleinere Fehler bzw. ungereimtheiten

#13

Beitrag von WarmRed » Mo 29. Aug 2011, 17:26

Heute morgen war der EPG leer. Ich habe nun, nachdem ich mal alles aus dem Autostart geschmissen habe was ich nicht wirklich täglich brauche, nochmals manuelle gescant um den EPG wieder zu füllen. Ich habe somit nur noch TapToDate, TMSmount, SmartEPG, IQ Tuner und RebuildNAV/Rec im Autostart. Mal schauen ob nun die EPG Daten über die Nacht immer noch verloren gehen.
Zuletzt geändert von WarmRed am Mo 29. Aug 2011, 17:32, insgesamt 3-mal geändert.
Nach oben
Benutzeravatar
FireBird
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Suspekter verdächtiger Zauberküchenchef, TAP & Firmware-Guru
Beiträge: 28923
Registriert: Fr 9. Dez 2005, 09:59
Receivertyp: SRP-2401CI+ TFIR
vu+ Duo 4k
Wohnort: Wien

AW: Kleinere Fehler bzw. ungereimtheiten

#14

Beitrag von FireBird » Mo 29. Aug 2011, 17:29

Er hat in der Früh auch gar nicht gescannt. Man sieht aber auch keine Events zwischen 04:59 und 16:03. War er aus?
Nach oben
Benutzeravatar
WarmRed
Kabelversteher
Kabelversteher
Beiträge: 455
Registriert: Mo 17. Jan 2011, 20:54
Receivertyp: CRP-2401ci+

AW: Kleinere Fehler bzw. ungereimtheiten

#15

Beitrag von WarmRed » Mo 29. Aug 2011, 17:36

Ja der Topf war aus als ich schlafen ging. Seit dem vorletzten Update war er am Morgen jeweils an, er hat sich also nicht wie zuvor selber abgeschaltet. Ich habe darum nun in den Settings bei "nach scan immer aus" auf ja gestellt. In der Hoffnung das er sich nun wieder selber abschaltet.
Viellicht liegt es ja auch daran dass ich das Update noch installiert habe zuvor und kein scan gemacht habe.
Zuletzt geändert von WarmRed am Mo 29. Aug 2011, 17:38, insgesamt 1-mal geändert.
Nach oben
Benutzeravatar
MrCooper
Erfahrener Benutzer
Erfahrener Benutzer
Beiträge: 217
Registriert: Di 3. Mai 2011, 20:01
Receivertyp: CRP-2401 CI+
Wohnort: Bern, Schweiz

AW: Kleinere Fehler bzw. ungereimtheiten

#16

Beitrag von MrCooper » Mo 29. Aug 2011, 18:26

Für Cablecom User habe ich in viewtopic.php?p=829815#p829815 einen möglichen Workaround beschrieben, mit dem man zumindest für 24h EPG Daten haben sollte.

Habe mit 0.9.7e erst einen manuellen Scan gemacht, dabei ist das Problem wieder aufgetreten. Mal sehen, wie's morgen beim automatischen Scan aussieht...

Interessanterweise funktionierte das Erzeugen der kompletten EPG Datenbank einige Minuten später, ohne dass ich dazwischen den Topf neu gestartet oder ein TAP beendet hätte. Also war eigentlich doch genügend Speicher verfügbar?

Unten Auszüge aus dem Log für beide oben beschriebenen Ereignisse.

P.S. Bei mir hatte der Scan wie bei WarmRed nach dem 10 Minuten Timeout noch nicht alle Daten. Vielleicht frisst die Anzeige des verfügbaren Speichers wieder Leistung für den Scan?

Code: Alles auswählen

2011-08-29 13:56:09 # of transponders to be scanned = 1
2011-08-29 13:56:09 Scanner: switching to transponder 32784 (Welcome)
2011-08-29 13:56:09 Scanner: launching EIT filter for table 0x4e
2011-08-29 13:56:09 Scanner: launching EIT filter for table 0x4f
2011-08-29 13:56:09 Scanner: launching EIT filter for table 0x50
2011-08-29 13:56:09 Scanner: launching EIT filter for table 0x60
2011-08-29 13:56:11 Scanner: launching EIT filter for table 0x61
2011-08-29 13:56:11 Scanner: available memory = 29576kB
2011-08-29 13:56:12 Scanner: reserved memory = 128 kB
2011-08-29 13:56:12 Scanner: launching EIT filter for table 0x51
2011-08-29 13:56:12 Scanner: reserved memory = 256 kB
2011-08-29 13:56:13 Scanner: reserved memory = 384 kB
2011-08-29 13:56:14 Scanner: reserved memory = 512 kB
2011-08-29 13:56:14 Scanner: reserved memory = 640 kB
2011-08-29 13:56:15 Scanner: reserved memory = 768 kB
2011-08-29 13:56:15 Scanner: available memory = 28671kB
2011-08-29 13:56:16 Scanner: reserved memory = 896 kB
2011-08-29 13:56:16 Scanner: reserved memory = 1024 kB
2011-08-29 13:56:17 Scanner: reserved memory = 1152 kB
2011-08-29 13:56:17 Scanner: reserved memory = 1281 kB
2011-08-29 13:56:18 Scanner: reserved memory = 1408 kB
2011-08-29 13:56:19 Scanner: reserved memory = 1536 kB
2011-08-29 13:56:19 Scanner: reserved memory = 1664 kB
2011-08-29 13:56:20 Scanner: reserved memory = 1792 kB
2011-08-29 13:56:20 Scanner: available memory = 27647kB
2011-08-29 13:56:21 Scanner: reserved memory = 1920 kB
2011-08-29 13:56:21 Scanner: reserved memory = 2048 kB
2011-08-29 13:56:22 Scanner: reserved memory = 2176 kB
2011-08-29 13:56:23 Scanner: reserved memory = 2305 kB
2011-08-29 13:56:23 Scanner: reserved memory = 2433 kB
2011-08-29 13:56:24 Scanner: reserved memory = 2560 kB
2011-08-29 13:56:25 Scanner: reserved memory = 2688 kB
2011-08-29 13:56:25 Scanner: reserved memory = 2819 kB
2011-08-29 13:56:26 Scanner: available memory = 26623kB
2011-08-29 13:56:26 Scanner: reserved memory = 2945 kB
2011-08-29 13:56:27 Scanner: reserved memory = 3072 kB
2011-08-29 13:56:27 Scanner: reserved memory = 3200 kB
2011-08-29 13:56:28 Scanner: reserved memory = 3328 kB
2011-08-29 13:56:29 Scanner: reserved memory = 3456 kB
2011-08-29 13:56:29 Scanner: reserved memory = 3584 kB
2011-08-29 13:56:30 Scanner: reserved memory = 3712 kB
2011-08-29 13:56:31 Scanner: reserved memory = 3840 kB
2011-08-29 13:56:31 Scanner: available memory = 25598kB
2011-08-29 13:56:32 Scanner: reserved memory = 3969 kB
2011-08-29 13:56:32 Scanner: reserved memory = 4096 kB
2011-08-29 13:56:33 Scanner: reserved memory = 4224 kB
2011-08-29 13:56:34 Scanner: reserved memory = 4353 kB
2011-08-29 13:56:34 Scanner: reserved memory = 4480 kB
2011-08-29 13:56:35 Scanner: reserved memory = 4609 kB
2011-08-29 13:56:36 Scanner: reserved memory = 4736 kB
2011-08-29 13:56:36 Scanner: available memory = 24574kB
2011-08-29 13:56:36 Scanner: reserved memory = 4864 kB
2011-08-29 13:56:37 Scanner: reserved memory = 4992 kB
2011-08-29 13:56:38 Scanner: reserved memory = 5120 kB
2011-08-29 13:56:39 Scanner: reserved memory = 5248 kB
2011-08-29 13:56:39 Scanner: reserved memory = 5376 kB
2011-08-29 13:56:40 Scanner: reserved memory = 5504 kB
2011-08-29 13:56:41 Scanner: reserved memory = 5633 kB
2011-08-29 13:56:41 Scanner: reserved memory = 5760 kB
2011-08-29 13:56:42 Scanner: available memory = 23550kB
2011-08-29 13:56:42 Scanner: reserved memory = 5888 kB
2011-08-29 13:56:43 Scanner: reserved memory = 6016 kB
2011-08-29 13:56:43 Scanner: reserved memory = 6144 kB
2011-08-29 13:56:44 Scanner: reserved memory = 6273 kB
2011-08-29 13:56:45 Scanner: reserved memory = 6400 kB
2011-08-29 13:56:45 Scanner: reserved memory = 6529 kB
2011-08-29 13:56:46 Scanner: reserved memory = 6657 kB
2011-08-29 13:56:47 Scanner: reserved memory = 6784 kB
2011-08-29 13:56:47 Scanner: available memory = 22527kB
2011-08-29 13:56:48 Scanner: reserved memory = 6912 kB
2011-08-29 13:56:48 Scanner: reserved memory = 7041 kB
2011-08-29 13:56:49 Scanner: reserved memory = 7168 kB
2011-08-29 13:56:50 Scanner: reserved memory = 7296 kB
2011-08-29 13:56:50 Scanner: reserved memory = 7424 kB
2011-08-29 13:56:51 Scanner: reserved memory = 7552 kB
2011-08-29 13:56:52 Scanner: reserved memory = 7681 kB
2011-08-29 13:56:52 Scanner: reserved memory = 7808 kB
2011-08-29 13:56:52 Scanner: available memory = 21503kB
2011-08-29 13:56:53 Scanner: reserved memory = 7937 kB
2011-08-29 13:56:54 Scanner: reserved memory = 8064 kB
2011-08-29 13:56:55 Scanner: reserved memory = 8192 kB
2011-08-29 13:56:55 Scanner: reserved memory = 8320 kB
2011-08-29 13:56:56 Scanner: reserved memory = 8449 kB
2011-08-29 13:56:57 Scanner: reserved memory = 8577 kB
2011-08-29 13:56:58 Scanner: reserved memory = 8704 kB
2011-08-29 13:56:58 Scanner: available memory = 20479kB
2011-08-29 13:56:58 Scanner: reserved memory = 8832 kB
2011-08-29 13:56:59 Scanner: reserved memory = 8960 kB
2011-08-29 13:57:00 Scanner: reserved memory = 9088 kB
2011-08-29 13:57:01 Scanner: reserved memory = 9216 kB
2011-08-29 13:57:02 Scanner: reserved memory = 9345 kB
2011-08-29 13:57:03 Scanner: reserved memory = 9473 kB
2011-08-29 13:57:04 Scanner: reserved memory = 9600 kB
2011-08-29 13:57:04 Scanner: available memory = 19455kB
2011-08-29 13:57:04 Scanner: reserved memory = 9728 kB
2011-08-29 13:57:05 Scanner: reserved memory = 9856 kB
2011-08-29 13:57:06 Scanner: reserved memory = 9984 kB
2011-08-29 13:57:07 Scanner: reserved memory = 10112 kB
2011-08-29 13:57:08 Scanner: reserved memory = 10240 kB
2011-08-29 13:57:09 Scanner: reserved memory = 10368 kB
2011-08-29 13:57:10 Scanner: reserved memory = 10496 kB
2011-08-29 13:57:11 Scanner: reserved memory = 10625 kB
2011-08-29 13:57:11 Scanner: available memory = 18431kB
2011-08-29 13:57:11 Scanner: reserved memory = 10752 kB
2011-08-29 13:57:13 Scanner: reserved memory = 10881 kB
2011-08-29 13:57:13 Scanner: reserved memory = 11008 kB
2011-08-29 13:57:14 Scanner: reserved memory = 11136 kB
2011-08-29 13:57:15 Scanner: reserved memory = 11264 kB
2011-08-29 13:57:16 Scanner: reserved memory = 11392 kB
2011-08-29 13:57:17 Scanner: reserved memory = 11522 kB
2011-08-29 13:57:18 Scanner: available memory = 17405kB
2011-08-29 13:57:18 Scanner: reserved memory = 11649 kB
2011-08-29 13:57:19 Scanner: reserved memory = 11776 kB
2011-08-29 13:57:20 Scanner: reserved memory = 11904 kB
2011-08-29 13:57:21 Scanner: reserved memory = 12033 kB
2011-08-29 13:57:22 Scanner: reserved memory = 12161 kB
2011-08-29 13:57:23 Scanner: reserved memory = 12288 kB
2011-08-29 13:57:24 Scanner: reserved memory = 12416 kB
2011-08-29 13:57:25 Scanner: reserved memory = 12544 kB
2011-08-29 13:57:25 Scanner: available memory = 16383kB
2011-08-29 13:57:26 Scanner: reserved memory = 12674 kB
2011-08-29 13:57:27 Scanner: reserved memory = 12800 kB
2011-08-29 13:57:28 Scanner: reserved memory = 12929 kB
2011-08-29 13:57:29 Scanner: reserved memory = 13056 kB
2011-08-29 13:57:30 Scanner: reserved memory = 13184 kB
2011-08-29 13:57:31 Scanner: reserved memory = 13312 kB
2011-08-29 13:57:32 Scanner: reserved memory = 13441 kB
2011-08-29 13:57:33 Scanner: reserved memory = 13568 kB
2011-08-29 13:57:33 Scanner: available memory = 15358kB
2011-08-29 13:57:34 Scanner: reserved memory = 13696 kB
2011-08-29 13:57:35 Scanner: reserved memory = 13824 kB
2011-08-29 13:57:36 Scanner: reserved memory = 13952 kB
2011-08-29 13:57:37 Scanner: reserved memory = 14080 kB
2011-08-29 13:57:38 Scanner: reserved memory = 14209 kB
2011-08-29 13:57:39 Scanner: reserved memory = 14336 kB
2011-08-29 13:57:40 Scanner: reserved memory = 14464 kB
2011-08-29 13:57:41 Scanner: reserved memory = 14592 kB
2011-08-29 13:57:42 Scanner: available memory = 14335kB
2011-08-29 13:57:43 Scanner: reserved memory = 14720 kB
2011-08-29 13:57:45 Scanner: reserved memory = 14848 kB
2011-08-29 13:57:48 Scanner: reserved memory = 14976 kB
2011-08-29 13:57:51 Scanner: reserved memory = 15104 kB
2011-08-29 13:57:53 Scanner: reserved memory = 15232 kB
2011-08-29 13:57:56 Scanner: reserved memory = 15361 kB
2011-08-29 13:57:59 Scanner: reserved memory = 15488 kB
2011-08-29 13:58:01 Scanner: available memory = 13310kB
2011-08-29 13:58:02 Scanner: reserved memory = 15616 kB
2011-08-29 13:58:04 Scanner: reserved memory = 15744 kB
2011-08-29 13:58:07 Scanner: reserved memory = 15872 kB
2011-08-29 13:58:10 Scanner: reserved memory = 16002 kB
2011-08-29 13:58:13 Scanner: reserved memory = 16128 kB
2011-08-29 13:58:16 Scanner: reserved memory = 16256 kB
2011-08-29 13:58:19 Scanner: reserved memory = 16384 kB
2011-08-29 13:58:22 Scanner: reserved memory = 16513 kB
2011-08-29 13:58:23 Scanner: available memory = 12286kB
2011-08-29 13:58:23 Scanner: available memory = 12288kB
2011-08-29 13:58:23 Scanner: available memory = 12287kB
2011-08-29 13:58:23 Scanner: available memory = 12288kB
2011-08-29 13:58:23 Scanner: available memory = 12287kB
2011-08-29 13:58:24 Scanner: available memory = 12288kB
2011-08-29 13:58:24 Scanner: available memory = 12286kB
2011-08-29 13:58:25 Scanner: reserved memory = 16640 kB
2011-08-29 13:58:28 Scanner: reserved memory = 16769 kB
2011-08-29 13:58:43 Scanner: reserved memory = 16896 kB
2011-08-29 13:58:52 Scanner: reserved memory = 17025 kB
2011-08-29 13:58:59 Scanner: reserved memory = 17152 kB
2011-08-29 13:59:06 Scanner: reserved memory = 17280 kB
2011-08-29 13:59:12 Scanner: reserved memory = 17408 kB
2011-08-29 13:59:30 Scanner: reserved memory = 17536 kB
2011-08-29 13:59:36 Scanner: available memory = 11263kB
2011-08-29 13:59:36 Scanner: available memory = 11265kB
2011-08-29 13:59:36 Scanner: available memory = 11262kB
2011-08-29 13:59:36 Scanner: available memory = 11264kB
2011-08-29 13:59:36 Scanner: available memory = 11263kB
2011-08-29 13:59:37 Scanner: available memory = 11264kB
2011-08-29 13:59:37 Scanner: available memory = 11262kB
2011-08-29 13:59:37 Scanner: available memory = 11264kB
2011-08-29 13:59:37 Scanner: available memory = 11262kB
2011-08-29 13:59:37 Scanner: available memory = 11265kB
2011-08-29 13:59:38 Scanner: available memory = 11263kB
2011-08-29 13:59:42 Scanner: reserved memory = 17666 kB
2011-08-29 13:59:52 Scanner: reserved memory = 17792 kB
2011-08-29 14:00:00 Scanner: reserved memory = 17921 kB
2011-08-29 14:00:09 Scanner: reserved memory = 18049 kB
2011-08-29 14:00:16 Scanner: reserved memory = 18177 kB
2011-08-29 14:00:23 Scanner: reserved memory = 18304 kB
2011-08-29 14:00:31 Scanner: reserved memory = 18432 kB
2011-08-29 14:00:37 Scanner: reserved memory = 18560 kB
2011-08-29 14:00:54 Scanner: still expecting 1944 of 20543 sections. Waiting for 1 minute
2011-08-29 14:01:38 Scanner: reserved memory = 18688 kB
2011-08-29 14:01:41 Scanner: available memory = 10239kB
2011-08-29 14:01:41 Scanner: available memory = 10240kB
2011-08-29 14:01:41 Scanner: available memory = 10238kB
2011-08-29 14:02:01 Scanner: reserved memory = 18816 kB
2011-08-29 14:02:17 Scanner: reserved memory = 18944 kB
2011-08-29 14:02:43 Scanner: reserved memory = 19072 kB
2011-08-29 14:03:10 Scanner: reserved memory = 19200 kB
2011-08-29 14:04:13 Scanner: reserved memory = 19328 kB
2011-08-29 14:04:54 Scanner: reserved memory = 19457 kB
2011-08-29 14:05:24 Scanner: still expecting 899 of 20544 sections. Waiting for 1 minute
2011-08-29 14:06:09 Scan of this transponder terminated because of a 10 minutes timeout. Got 95%
2011-08-29 14:06:21 Scanner: 19659 EIT packets received
2011-08-29 14:06:43 Processing 2 eit files
2011-08-29 14:06:43 EPGDB: failed to reserve memory for the EITData buffer
2011-08-29 14:06:57 Scanner: Total events    =    12134
2011-08-29 14:06:57 Scanner: Filtered events =     4920
2011-08-29 14:06:57 Scanner: 4920 events found

[...]

2011-08-29 14:20:27 Processing 2 eit files
2011-08-29 14:26:23 Scanner: Total events    =    98496
2011-08-29 14:26:23 Scanner: Filtered events =    36454
2011-08-29 14:26:23 36454 events found
Nach oben
Benutzeravatar
WarmRed
Kabelversteher
Kabelversteher
Beiträge: 455
Registriert: Mo 17. Jan 2011, 20:54
Receivertyp: CRP-2401ci+

AW: SE und Scan bei Cablecom user

#17

Beitrag von WarmRed » Di 30. Aug 2011, 05:35

Heute Morgen war der EPG noch da :hello: . Ich hoffe nun dass es so bleibt -ha- . Das einzige was ich geändert habe zu gestern ist, dass ich den Autostart Ordner aufgeräumt habe und nur das Wichtigste drin gelassen habe.
Nach oben
Capobon
Topfazubi
Topfazubi
Beiträge: 43
Registriert: Do 21. Apr 2011, 07:24

#18

Beitrag von Capobon » Di 30. Aug 2011, 08:39

Bei mir funktioniert es jetzt auch nach mehrmaligem Neustart nicht mehr. Im Autostart habe ich nur Quickstart.

Ob ein komplettes Neuaufsetzen von SE helfen würde ?
Nach oben
Benutzeravatar
Twilight
Zauberküchencheflehrling mit extra Butter
Zauberküchencheflehrling mit extra Butter
Beiträge: 64898
Registriert: Fr 9. Dez 2005, 09:17
Receivertyp: 1 x SRP 2100(TMS) TFIR und .1 x SRP 2410 M
Wohnort: Wien Umgebung

AW: SE und Scan bei Cablecom user

#19

Beitrag von Twilight » Di 30. Aug 2011, 08:47

was heißt "nur" quickstart....was startet denn das tap alles "nur"....

twilight
Nach oben
Benutzeravatar
xyzzyx
TAPPortierer
TAP<font color=DarkRed>Portierer</font>
Beiträge: 2099
Registriert: Sa 6. Jun 2009, 18:35
Receivertyp: SRP-2100 (TMS), **** Duo²
Receiverfirmware: verschiedene
Kontaktdaten:
Kontaktdaten von xyzzyx

AW: SE und Scan bei Cablecom user

#20

Beitrag von xyzzyx » Di 30. Aug 2011, 09:05

Ich denke er meint Quickplay, oder?
MfG,
xyzzyx

Die Liste meiner portierten und meiner eigenen TAPs findet man hier

:bounce: Download: Homepage :bounce: Installieren: TAPtoDate :bounce: Beschreibungen: Topfield TAP-Seite :bounce:
Nach oben
Antworten

Zurück zu „SmartEPG TMS“