Firmware via OTA

Alle Fragen und Anliegen zum TF4000PVR bitte hier posten.
pilucchetta
Vielfrager
Vielfrager
Beiträge: 10
Registriert: Di 19. Dez 2006, 23:25

Firmware via OTA

#1

Beitrag von pilucchetta » Di 19. Dez 2006, 23:34

Hellò to all in this board :D :
Hi, I'm Italian friend and excuse me if I post here.
I would want to know if it is possible to modernize firmware of the decoder via satellite. They could make on astra 19 east or on hotbird 13 east? Thanks :wink:
Pilucchetta

Benutzeravatar
Bonni
Guru in perpetuum
Guru in perpetuum
Beiträge: 8211
Registriert: Fr 9. Dez 2005, 18:37
Wohnort: Hamm (Westf.)
Receivertyp: SRP-2401 CI+ eco / VU+ Ultimo 4k
Receiverfirmware: TF-BPCE 1.03.00
Wohnort: Hamm (Westf.)

AW: Firmware via OTA

#2

Beitrag von Bonni » Di 19. Dez 2006, 23:53

Ciao! No excuse necessary, that's what we're here for... :wink:

Well, yes, it is possible, but you cannot be sure to find the newest firmware on sat. So updating the firmware over the serial port is better - know ow that works?

Anyway, you can give the ota update a try, here are the frequencies:

Astra 19,2°:
  • Frequenc: 12603 MHz
  • Symbolrate: 22000 Ks/s
  • Polarisation: Horizontal
  • PID: 347
Hotbird 13°:
  • Frequency : 12.673MHz
  • Symbolrate : 27500 Ks/s
  • Polarisation : Vertical
  • PID: 730
Gruß Bonni


90cm-Schüssel + 2 Quattro LNB + TELEKA SAM 2294N Multiswitch 9:4 (seit 08/1998!)
VU+ Ultimo 4k (seit 05/2020) mit 2x DVB-S2X FBC Twin Tuner, 1x DVB-T2 Dual Tuner, SmartEPGvu+, PlutoTV, uvm.
SRP-2401 CI+ Eco (seit 10/2017) mit SmartEPG_TMS, TAPtoDate, WebControl, uvm. - läuft noch hier und da im "Kinderzimmer"
TF5000PVR (seit 09/2003) mit USB Accelerator, ImproBox, PowerRestore, iTiNa - im September 2024 voll funktionstüchtig vom Strom getrennt.
TF5000CI (seit 06/2005) - früher im Kinderzimmer, jetzt ausgemustert im Keller, bald Elektroschrott

pilucchetta
Vielfrager
Vielfrager
Beiträge: 10
Registriert: Di 19. Dez 2006, 23:25

AW: Firmware via OTA

#3

Beitrag von pilucchetta » Mi 20. Dez 2006, 00:22

Thanks for replay :wink: . I can't make with serial port because it's break :cry:
Now i will try with this frequency.....
Theh i will write here :wink: By
Pilucchetta

pilucchetta
Vielfrager
Vielfrager
Beiträge: 10
Registriert: Di 19. Dez 2006, 23:25

AW: Firmware via OTA

#4

Beitrag von pilucchetta » Mi 20. Dez 2006, 18:49

Bonni, frequence doesn't go :cry:
I think that this frequence is the some is in faq of http://www.topfield co/kr. I know they, but doesn't go!
other ideas? :wink:
Pilucchetta

Benutzeravatar
Bonni
Guru in perpetuum
Guru in perpetuum
Beiträge: 8211
Registriert: Fr 9. Dez 2005, 18:37
Wohnort: Hamm (Westf.)
Receivertyp: SRP-2401 CI+ eco / VU+ Ultimo 4k
Receiverfirmware: TF-BPCE 1.03.00
Wohnort: Hamm (Westf.)

AW: Firmware via OTA

#5

Beitrag von Bonni » Mi 20. Dez 2006, 19:53

Well, Pilucchetta, the frequencies are correct - according to my own Topfield's update menu.

So what does "frequency doesn't go" mean? The Topfield tells you, that you've got the newest software?

That's what I said: not always the newest on sat. And if your serial port is broken, I think there is no chance to update the software now.

Is there any special need to update it? Which version (by date) do you currently have?
Gruß Bonni


90cm-Schüssel + 2 Quattro LNB + TELEKA SAM 2294N Multiswitch 9:4 (seit 08/1998!)
VU+ Ultimo 4k (seit 05/2020) mit 2x DVB-S2X FBC Twin Tuner, 1x DVB-T2 Dual Tuner, SmartEPGvu+, PlutoTV, uvm.
SRP-2401 CI+ Eco (seit 10/2017) mit SmartEPG_TMS, TAPtoDate, WebControl, uvm. - läuft noch hier und da im "Kinderzimmer"
TF5000PVR (seit 09/2003) mit USB Accelerator, ImproBox, PowerRestore, iTiNa - im September 2024 voll funktionstüchtig vom Strom getrennt.
TF5000CI (seit 06/2005) - früher im Kinderzimmer, jetzt ausgemustert im Keller, bald Elektroschrott

pilucchetta
Vielfrager
Vielfrager
Beiträge: 10
Registriert: Di 19. Dez 2006, 23:25

AW: Firmware via OTA

#6

Beitrag von pilucchetta » Mi 20. Dez 2006, 23:14

sorry for my imperfect english :oops:
In this frequences it does not happen nothing
I have the penultimate firmware:
TF4000PVR Firmware (206) 2006-09-18
But there is some problem with audio
You sayd that firmware via OTA doesn't available always on the satellite?
Thanks :wink:
Pilucchetta

Benutzeravatar
Bonni
Guru in perpetuum
Guru in perpetuum
Beiträge: 8211
Registriert: Fr 9. Dez 2005, 18:37
Wohnort: Hamm (Westf.)
Receivertyp: SRP-2401 CI+ eco / VU+ Ultimo 4k
Receiverfirmware: TF-BPCE 1.03.00
Wohnort: Hamm (Westf.)

AW: Firmware via OTA

#7

Beitrag von Bonni » Mi 20. Dez 2006, 23:24

Well, yes, according to the Topfield homepage the newest firmwarm is 2006-10-11. Should be ota soon. Just give it a try here and then...
Gruß Bonni


90cm-Schüssel + 2 Quattro LNB + TELEKA SAM 2294N Multiswitch 9:4 (seit 08/1998!)
VU+ Ultimo 4k (seit 05/2020) mit 2x DVB-S2X FBC Twin Tuner, 1x DVB-T2 Dual Tuner, SmartEPGvu+, PlutoTV, uvm.
SRP-2401 CI+ Eco (seit 10/2017) mit SmartEPG_TMS, TAPtoDate, WebControl, uvm. - läuft noch hier und da im "Kinderzimmer"
TF5000PVR (seit 09/2003) mit USB Accelerator, ImproBox, PowerRestore, iTiNa - im September 2024 voll funktionstüchtig vom Strom getrennt.
TF5000CI (seit 06/2005) - früher im Kinderzimmer, jetzt ausgemustert im Keller, bald Elektroschrott

Benutzeravatar
Twilight
Zauberküchencheflehrling mit extra Butter
Zauberküchencheflehrling mit extra Butter
Beiträge: 64913
Registriert: Fr 9. Dez 2005, 09:17
Receivertyp: 1 x SRP 2100(TMS) TFIR und .1 x SRP 2410 M
Wohnort: Wien Umgebung

AW: Firmware via OTA

#8

Beitrag von Twilight » Do 21. Dez 2006, 09:05

In this frequences it does not happen nothing
how old is your 4000?
which bootloader has your 4000?
it depends on the bootloader if your 4000 can uptade the firmware by sat.

normaly the 4000 must say "there is no new firmware on sat" (something like that ;) )

twilight

Benutzeravatar
Bonni
Guru in perpetuum
Guru in perpetuum
Beiträge: 8211
Registriert: Fr 9. Dez 2005, 18:37
Wohnort: Hamm (Westf.)
Receivertyp: SRP-2401 CI+ eco / VU+ Ultimo 4k
Receiverfirmware: TF-BPCE 1.03.00
Wohnort: Hamm (Westf.)

AW: Firmware via OTA

#9

Beitrag von Bonni » Do 21. Dez 2006, 12:18

Oops, I did not know, that there are TF4000 with bootloaders that are not able to perform an OTA update.

Well, that's twilight's 4000 experience I do not have... :?
Gruß Bonni


90cm-Schüssel + 2 Quattro LNB + TELEKA SAM 2294N Multiswitch 9:4 (seit 08/1998!)
VU+ Ultimo 4k (seit 05/2020) mit 2x DVB-S2X FBC Twin Tuner, 1x DVB-T2 Dual Tuner, SmartEPGvu+, PlutoTV, uvm.
SRP-2401 CI+ Eco (seit 10/2017) mit SmartEPG_TMS, TAPtoDate, WebControl, uvm. - läuft noch hier und da im "Kinderzimmer"
TF5000PVR (seit 09/2003) mit USB Accelerator, ImproBox, PowerRestore, iTiNa - im September 2024 voll funktionstüchtig vom Strom getrennt.
TF5000CI (seit 06/2005) - früher im Kinderzimmer, jetzt ausgemustert im Keller, bald Elektroschrott

Benutzeravatar
Twilight
Zauberküchencheflehrling mit extra Butter
Zauberküchencheflehrling mit extra Butter
Beiträge: 64913
Registriert: Fr 9. Dez 2005, 09:17
Receivertyp: 1 x SRP 2100(TMS) TFIR und .1 x SRP 2410 M
Wohnort: Wien Umgebung

AW: Firmware via OTA

#10

Beitrag von Twilight » Do 21. Dez 2006, 14:29

[quote=""Bonni""]
Well, that's twilight's 4000 experience I do not have... :? [/quote]

thank you for the flowers, bonni ;)

twilight

pilucchetta
Vielfrager
Vielfrager
Beiträge: 10
Registriert: Di 19. Dez 2006, 23:25

AW: Firmware via OTA

#11

Beitrag von pilucchetta » Do 21. Dez 2006, 17:58

[quote=""Twilight""]how old is your 4000?
which bootloader has your 4000?
it depends on the bootloader if your 4000 can uptade the firmware by sat.

normaly the 4000 must say "there is no new firmware on sat" (something like that ;) )

twilight[/quote]
Ok, how I will have any time I tell you. :wink:
See you....
Pilucchetta

Benutzeravatar
ragtime
Quelle des Wissens
Quelle des Wissens
Beiträge: 1295
Registriert: Do 10. Aug 2006, 17:24
Receivertyp: TF4000PVR
Receiverfirmware: TF-JPC 4.59.01

AW: Firmware via OTA

#12

Beitrag von ragtime » So 24. Dez 2006, 14:12

[quote=""pilucchetta""]sorry for my imperfect english :oops:
In this frequences it does not happen nothing
I have the penultimate firmware:
TF4000PVR Firmware (206) 2006-09-18
But there is some problem with audio
You sayd that firmware via OTA doesn't available always on the satellite?
Thanks :wink:
Pilucchetta[/quote]

It's always sent some FW OTA but NOT always the newest one... ;-)

And you have already nearly the newest BETA firmware on your receiver, which should cause no Audio-Problems (on the satellite is a older one from April which definitely has some Audio-Problems... at least with german TV stations).

AFAIK, there's only a known Problem with Tele-Text and encoding of encrypted channels with your current FW. The newer official FW from 11.10.2006 solves this problems, but introduces a few other, so I'm not sure if this version will make it on the satellite...

BTW,... if your serial connection is broken, how did it happen that a BETA Firmware is on your receiver?

pilucchetta
Vielfrager
Vielfrager
Beiträge: 10
Registriert: Di 19. Dez 2006, 23:25

AW: Firmware via OTA

#13

Beitrag von pilucchetta » Mi 24. Jan 2007, 00:30

The serial cable was broken than I download last firmware :wink:
Do you know if Topfield will leave a new firmware on air next month? Or 400pvr will die?
Thanks :wink:
Pilucchetta

Benutzeravatar
Bonni
Guru in perpetuum
Guru in perpetuum
Beiträge: 8211
Registriert: Fr 9. Dez 2005, 18:37
Wohnort: Hamm (Westf.)
Receivertyp: SRP-2401 CI+ eco / VU+ Ultimo 4k
Receiverfirmware: TF-BPCE 1.03.00
Wohnort: Hamm (Westf.)

AW: Firmware via OTA

#14

Beitrag von Bonni » Mi 24. Jan 2007, 09:14

[quote=""pilucchetta""]Do you know if Topfield will leave a new firmware on air next month? Or 400pvr will die?[/quote]
Well, Topfield does not talk about release dates any longer, so nobody knows when a new firmware will arrive.

And I don't think the 4000 will die, but it seems, Topfield concentrates more on newer models. As every company does...
Gruß Bonni


90cm-Schüssel + 2 Quattro LNB + TELEKA SAM 2294N Multiswitch 9:4 (seit 08/1998!)
VU+ Ultimo 4k (seit 05/2020) mit 2x DVB-S2X FBC Twin Tuner, 1x DVB-T2 Dual Tuner, SmartEPGvu+, PlutoTV, uvm.
SRP-2401 CI+ Eco (seit 10/2017) mit SmartEPG_TMS, TAPtoDate, WebControl, uvm. - läuft noch hier und da im "Kinderzimmer"
TF5000PVR (seit 09/2003) mit USB Accelerator, ImproBox, PowerRestore, iTiNa - im September 2024 voll funktionstüchtig vom Strom getrennt.
TF5000CI (seit 06/2005) - früher im Kinderzimmer, jetzt ausgemustert im Keller, bald Elektroschrott

pilucchetta
Vielfrager
Vielfrager
Beiträge: 10
Registriert: Di 19. Dez 2006, 23:25

AW: Firmware via OTA

#15

Beitrag von pilucchetta » Mi 24. Jan 2007, 16:33

[quote=""Bonni""]Well, Topfield does not talk about release dates any longer, so nobody knows when a new firmware will arrive.

And I don't think the 4000 will die, but it seems, Topfield concentrates more on newer models. As every company does...[/quote]

Thanks :wink:
Pilucchetta

Antworten

Zurück zu „TF4000PVR Allgemeines“