Nach update

[dannyvdm]

I read many problems from users
I wait fot topfield comes with official firmware

1.07 will not work for me
Keep goining on and off when I select europaort of hd history channel
Very irritating to watch

[dannyvdm]

Just tested now i can watch hd history with old firmware with out on-off
Soooo 1.07 sucks!!!
There is something not good with 1.07

[Twilight]

which taps do you use? is it the same when you start without loading taps (press 0 after power on, while receiver is started fully)

twilight

[Sirius]

... and did you really made a factory reset like Twilight said?

MENU ---> Installation ---> System Recovery ---> Factory Setting
.

[dannyvdm]

Yessss

[dannyvdm]

With all the new channels
And on hd history same problem

Receiver automaticly on off

[Twilight]

without taps?

twilight

[dannyvdm]

With and without tap same problem

I did a new firmware update thru netwerk firmw 1.07
Sytemid 22130

New channel list and suddenly not possible to watch hd history
Receiver going on and off automaticly!!!!!

Did it with and without taps
As you told me
Same problem!!!!!!!!!!


So 1.07 firmware is something wrong with it

Now half day with the old october 2011 version working fine and can watch hd history
I am happy

[Twilight]

is this channel on astra?

twilight

[dannyvdm]

Astra 3 and astra 1

[Twilight]

that is something buko should test
is it a scambled channel? from which provider?

twilight

[dannyvdm]

Canaal digitaal
Niederlande

Scrambled yes

[stprc]

I have the same problems as dannyvdm with hd history, but the same problems I have with eurosport HD dut--> on off on off.

Another strange thing that I have with the new firmware is that een HD (belgium cahnnel) does not have sound.

I did go back to the oct 2011 version firmware and everythings works fine.

How can I place the taptodate with a USB stick on my topf?
The problem is the my Deutch is nicht so gut that I exactly understand what has to be done , can some one explane me this?

[stprc]

I do have the same problems as dannyvdm with the new firmware that the receiver is when HD History channel is selected and after a few seconds the problem occurs, going on off on off ..... The same problem I do have with Eurosport HD Dut and another strange thing is that I do not have sound on the "een HD" (belgium channel).

So I did reload the 11okt 2011 firmware and everything is runnning as it should be.

By the way Everyone is mentioning the 11okt2011 version 1.06 but this is a 1.05 and the same for the 27aug2011 version this is not 1.07 but 1.06, at least that is what my receiver preseting when I do callup the info on the receiver.

My receiver is a 2401CI+.

[Gerti]

Hello!

I need detailed information about the channels which make the receiver rebooting.
Please tell me about Satellite, Frequency, Symbolrate, etc. and the CAM and SmartCard you are using.

We try to reproduce the issue with History HD on Astra 3 but didn't experience any reboot issue.

Best regards,
Michael

[stprc]

Michael,

The following channels did give the problems:
Astra 23.5, History HD, 11798 hor 27500 3/4
Astra 23.5, Eurosport HD Dut, 11797 hor 27500 3/4
My:
CAM: Aston 2.1700
Smartcard: Canal Digital
SRP2401CI+ System ID 22120

René

[Gerti]

Hi!

Can you give me some more detailed information about the CAM?
Maybe a photo of front and back of the CAM?

With our CI+ Modul from CanaalDigital we can't reproduce such issue.

Best regards,
Michael

[stprc]

CAM is an Aston crypt
DVB-CI modules
DVB number 2557

[unimatrix]

[quote="stprc"]CAM is an Aston crypt
DVB-CI modules
DVB number 2557[/quote]

Heb je de zenders opnieuw gezocht met 8PSK ipv QPSK?

MfG,

[stprc]

Unimatrix it has nothing to do with the frequencies and configuration of the transponders, it was always restarting on certain channels. After that I did received a special firmware version it was restarting on all channels. After that I did removed the harddisk the receiver was stable. Placed the HD back and the same probloem did appear. Finally did connect the HD to the computer en erased everything on that HD. Reinstalled and formated the HD in the receiver and everything was ok. installed all TAP's I did used, evrything still OK. Probably one of the TAP's did cause the problem in combination with the new firmware. Downgraded the firmware to the 27aug2012 version and again I did had problems with continuos restarting. Removed HD, erased HD on PC, formated the HD in receiver, loaded all TAP's needed and everything is now OK.

And indeed 2 day ago I had to change a transponder configuration, I Believe on Atra3 11865 for NED1, RTL4, RTL8 etc. to get back a good signal. But this did not cause restarting only bath signals.