EPG erstellung bricht ab, reboot

[makiao]

Hallo allerseits,

heute morgen stellte ich fest, dass der Topf ungewöhnlicher weise lief. Merkte dann schnell, dass bei der EPG Erstellung wohl was schief läuft.

Beim erstellen der EPG Datenbank Bootet er neu, etwa in der Hälfte während oben "Erzeuge EPG-Datenbank" steht.

Was kann ich dagegen unternehmen?

Der Scann beginnt bei jedem Neustart. Danke

[Twilight]

hast du das reboot tap installiert?

twilight

[makiao]

Oh schon eine antwort.
Nein hab ich wohl leider nicht.

[Twilight]

lade mal das SE log hier hoch, zumindest vom ganzen tag heute

twilight

[makiao]

Sowas?

Code: Alles auswählen

2014-05-07 22:35:35 ===================================================
2014-05-07 22:35:35 SmartEPG_TMS  V6.1b
2014-05-07 22:35:35 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-07 22:35:35 TimeZone = 60 min (+DST)
2014-05-07 22:35:35 System type: TMS DVBc
2014-05-07 22:35:43 CamState: APPL_STATE_CiPlus = 0x18
2014-05-07 22:35:43 CamState: using CIPlus mode
2014-05-07 22:35:44 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-07 22:35:44 ScanTimerMonitor: ScanTimer has been set to 2014-05-08 06:59
2014-05-07 22:35:44 LogoManager: 9107 cache records have been loaded
2014-05-07 22:35:44 IQTuner TAP is running
2014-05-07 22:37:56 EIT MON: 0 start times, 0 durations, 0 names, 0 descriptions, 51 ext. descriptions, 0 events added, 0 timer changed
2014-05-07 22:43:57 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2014-05-07 22:43:59 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-07 22:44:04 InfoboxMode: IBDM_TAPCOM - IBM_TV - IBPM_Rec
2014-05-07 22:44:04 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-07 22:45:07 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2014-05-07 22:45:09 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-07 22:47:21 EIT MON: 1 start times, 0 durations, 0 names, 0 descriptions, 117 ext. descriptions, 0 events added, 0 timer changed
2014-05-07 22:50:29 EIT MON: 1 start times, 0 durations, 0 names, 0 descriptions, 0 ext. descriptions, 0 events added, 0 timer changed
2014-05-07 23:03:06 EIT MON: 0 start times, 0 durations, 0 names, 0 descriptions, 10 ext. descriptions, 0 events added, 0 timer changed
2014-05-07 23:03:51 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2014-05-07 23:03:52 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-07 23:05:05 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2014-05-07 23:05:07 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-07 23:06:00 EIT MON: 0 start times, 0 durations, 0 names, 0 descriptions, 76 ext. descriptions, 0 events added, 0 timer changed
2014-05-07 23:41:34 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2014-05-07 23:41:37 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-07 23:42:16 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2014-05-07 23:42:46 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-07 23:42:53 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2014-05-07 23:42:57 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 00:17:34 EIT MON: 1 start times, 0 durations, 0 names, 0 descriptions, 0 ext. descriptions, 0 events added, 0 timer changed
2014-05-08 00:20:42 EIT MON: 1 start times, 0 durations, 0 names, 0 descriptions, 0 ext. descriptions, 0 events added, 0 timer changed
2014-05-08 00:30:09 EIT MON: 1 start times, 3 durations, 0 names, 0 descriptions, 0 ext. descriptions, 0 events added, 0 timer changed
2014-05-08 00:52:10 EIT MON: 1 start times, 0 durations, 0 names, 0 descriptions, 0 ext. descriptions, 0 events added, 0 timer changed
2014-05-08 00:55:18 EIT MON: 1 start times, 0 durations, 0 names, 0 descriptions, 0 ext. descriptions, 0 events added, 0 timer changed
2014-05-08 01:17:18 EIT MON: 1 start times, 0 durations, 0 names, 0 descriptions, 0 ext. descriptions, 0 events added, 0 timer changed
2014-05-08 01:20:26 EIT MON: 1 start times, 0 durations, 0 names, 0 descriptions, 0 ext. descriptions, 0 events added, 0 timer changed
2014-05-08 01:59:50 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2014-05-08 01:59:58 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 02:04:23 EIT MON: 4 start times, 0 durations, 0 names, 0 descriptions, 9 ext. descriptions, 0 events added, 0 timer changed
2014-05-08 02:07:31 EIT MON: 1 start times, 0 durations, 0 names, 0 descriptions, 0 ext. descriptions, 0 events added, 0 timer changed
2014-05-08 02:08:06 ScanTimer: last successful scan  @ 2014-05-07 07:03
2014-05-08 02:08:06 ScanTimer: next start slot       @ 2014-05-08 07:00
2014-05-08 02:08:06 TimerDB: deleting DB timer '00 'SmartEPG' (2014-05-08 07:00/2') (R=fedc, V=0000)'
2014-05-08 02:08:07 ScanTimer: slot needs to be      @ 20 minutes
2014-05-08 02:08:07 ScanTimer: timer has been set to @ 2014-05-08 07:00
2014-05-08 02:08:07 SE shutdown finished
2014-05-08 06:59:23 ===================================================
2014-05-08 06:59:23 SmartEPG_TMS  V6.1b
2014-05-08 06:59:23 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 06:59:23 TimeZone = 60 min (+DST)
2014-05-08 06:59:23 System type: TMS DVBc
2014-05-08 06:59:32 FlashTimerDebug: difference found @ 'Entry'
2014-05-08 06:59:32 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 06:59:32 CamState: using CIPlus mode
2014-05-08 06:59:32 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 06:59:32 ScanTimerMonitor: ScanTimer has been set to 2014-05-09 06:59
2014-05-08 06:59:32 LogoManager: 9107 cache records have been loaded
2014-05-08 06:59:32 IQTuner TAP is running
2014-05-08 06:59:32 TimerDB: DBTimer 'SmartEPG': start time has changed from '2014-05-08 07:00' to '2014-05-09 07:00'
2014-05-08 07:00:00 It's SmartEPG scan time
2014-05-08 07:00:10 Rebuildnav: Server not available
2014-05-08 07:00:10 # of transponders to be scanned = 1
2014-05-08 07:00:10 Scan mode is Rec
2014-05-08 07:00:10 Scanner: switching to transponder 32784 (Info Channel)
2014-05-08 07:00:10 FlashTimerDebug: difference found @ 'Entry (recursive)'
2014-05-08 07:00:13 FlashTimerDebug: difference found @ 'Entry (recursive)'
2014-05-08 07:03:07 Scanner: 26759 EIT sections received
2014-05-08 07:03:46 EPG main language = ger
2014-05-08 07:03:46 EPGDB: Processing 1 eit files
2014-05-08 07:05:33 ===================================================
2014-05-08 07:05:33 SmartEPG_TMS  V6.1b
2014-05-08 07:05:33 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:05:33 TimeZone = 60 min (+DST)
2014-05-08 07:05:33 System type: TMS DVBc
2014-05-08 07:05:42 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:05:42 CamState: using CIPlus mode
2014-05-08 07:05:42 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:05:42 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:06:07 EPG main language = ger
2014-05-08 07:06:07 EPGDB: Processing 1 eit files
2014-05-08 07:07:09 ===================================================
2014-05-08 07:07:09 SmartEPG_TMS  V6.1b
2014-05-08 07:07:09 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:07:09 TimeZone = 60 min (+DST)
2014-05-08 07:07:09 System type: TMS DVBc
2014-05-08 07:07:17 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:07:17 CamState: using CIPlus mode
2014-05-08 07:07:17 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:07:17 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:08:29 EPG main language = ger
2014-05-08 07:08:30 EPGDB: Processing 1 eit files
2014-05-08 07:10:21 ===================================================
2014-05-08 07:10:21 SmartEPG_TMS  V6.1b
2014-05-08 07:10:21 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:10:21 TimeZone = 60 min (+DST)
2014-05-08 07:10:21 System type: TMS DVBc
2014-05-08 07:10:30 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:10:30 CamState: using CIPlus mode
2014-05-08 07:10:30 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:10:30 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:10:54 EPG main language = ger
2014-05-08 07:10:54 EPGDB: Processing 1 eit files
2014-05-08 07:12:45 ===================================================
2014-05-08 07:12:45 SmartEPG_TMS  V6.1b
2014-05-08 07:12:45 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:12:45 TimeZone = 60 min (+DST)
2014-05-08 07:12:45 System type: TMS DVBc
2014-05-08 07:12:54 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:12:54 CamState: using CIPlus mode
2014-05-08 07:12:54 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:12:54 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:13:18 EPG main language = ger
2014-05-08 07:13:18 EPGDB: Processing 1 eit files
2014-05-08 07:15:08 ===================================================
2014-05-08 07:15:08 SmartEPG_TMS  V6.1b
2014-05-08 07:15:08 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:15:08 TimeZone = 60 min (+DST)
2014-05-08 07:15:08 System type: TMS DVBc
2014-05-08 07:15:17 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:15:17 CamState: using CIPlus mode
2014-05-08 07:15:17 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:15:17 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:15:42 EPG main language = ger
2014-05-08 07:15:42 EPGDB: Processing 1 eit files
2014-05-08 07:17:32 ===================================================
2014-05-08 07:17:32 SmartEPG_TMS  V6.1b
2014-05-08 07:17:32 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:17:32 TimeZone = 60 min (+DST)
2014-05-08 07:17:32 System type: TMS DVBc
2014-05-08 07:17:41 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:17:41 CamState: using CIPlus mode
2014-05-08 07:17:41 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:17:41 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:18:06 EPG main language = ger
2014-05-08 07:18:06 EPGDB: Processing 1 eit files
2014-05-08 07:19:57 ===================================================
2014-05-08 07:19:57 SmartEPG_TMS  V6.1b
2014-05-08 07:19:57 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:19:57 TimeZone = 60 min (+DST)
2014-05-08 07:19:57 System type: TMS DVBc
2014-05-08 07:20:06 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:20:06 CamState: using CIPlus mode
2014-05-08 07:20:06 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:20:06 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:20:30 EPG main language = ger
2014-05-08 07:20:31 EPGDB: Processing 1 eit files
2014-05-08 07:22:21 ===================================================
2014-05-08 07:22:21 SmartEPG_TMS  V6.1b
2014-05-08 07:22:21 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:22:21 TimeZone = 60 min (+DST)
2014-05-08 07:22:21 System type: TMS DVBc
2014-05-08 07:22:30 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:22:30 CamState: using CIPlus mode
2014-05-08 07:22:30 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:22:30 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:22:54 EPG main language = ger
2014-05-08 07:22:55 EPGDB: Processing 1 eit files
2014-05-08 07:24:45 ===================================================
2014-05-08 07:24:45 SmartEPG_TMS  V6.1b
2014-05-08 07:24:45 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:24:45 TimeZone = 60 min (+DST)
2014-05-08 07:24:45 System type: TMS DVBc
2014-05-08 07:24:54 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:24:54 CamState: using CIPlus mode
2014-05-08 07:24:54 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:24:54 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:25:19 EPG main language = ger
2014-05-08 07:25:19 EPGDB: Processing 1 eit files
2014-05-08 07:26:29 ===================================================
2014-05-08 07:26:29 SmartEPG_TMS  V6.1b
2014-05-08 07:26:29 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:26:29 TimeZone = 60 min (+DST)
2014-05-08 07:26:29 System type: TMS DVBc
2014-05-08 07:26:38 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:26:38 CamState: using CIPlus mode
2014-05-08 07:26:38 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:26:38 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:27:36 EPG main language = ger
2014-05-08 07:27:36 EPGDB: Processing 1 eit files
2014-05-08 07:29:26 ===================================================
2014-05-08 07:29:26 SmartEPG_TMS  V6.1b
2014-05-08 07:29:26 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:29:26 TimeZone = 60 min (+DST)
2014-05-08 07:29:26 System type: TMS DVBc
2014-05-08 07:29:35 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:29:35 CamState: using CIPlus mode
2014-05-08 07:29:35 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:29:35 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:30:09 EPG main language = ger
2014-05-08 07:30:09 EPGDB: Processing 1 eit files
2014-05-08 07:32:00 ===================================================
2014-05-08 07:32:00 SmartEPG_TMS  V6.1b
2014-05-08 07:32:00 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:32:00 TimeZone = 60 min (+DST)
2014-05-08 07:32:00 System type: TMS DVBc
2014-05-08 07:32:09 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:32:09 CamState: using CIPlus mode
2014-05-08 07:32:09 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:32:09 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:32:34 EPG main language = ger
2014-05-08 07:32:34 EPGDB: Processing 1 eit files
2014-05-08 07:34:25 ===================================================
2014-05-08 07:34:25 SmartEPG_TMS  V6.1b
2014-05-08 07:34:25 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:34:25 TimeZone = 60 min (+DST)
2014-05-08 07:34:25 System type: TMS DVBc
2014-05-08 07:34:34 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:34:34 CamState: using CIPlus mode
2014-05-08 07:34:34 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:34:34 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:34:59 EPG main language = ger
2014-05-08 07:34:59 EPGDB: Processing 1 eit files
2014-05-08 07:36:09 ===================================================
2014-05-08 07:36:09 SmartEPG_TMS  V6.1b
2014-05-08 07:36:09 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:36:09 TimeZone = 60 min (+DST)
2014-05-08 07:36:09 System type: TMS DVBc
2014-05-08 07:36:18 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:36:18 CamState: using CIPlus mode
2014-05-08 07:36:18 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:36:18 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:37:16 EPG main language = ger
2014-05-08 07:37:17 EPGDB: Processing 1 eit files
2014-05-08 07:38:29 ===================================================
2014-05-08 07:38:29 SmartEPG_TMS  V6.1b
2014-05-08 07:38:29 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:38:29 TimeZone = 60 min (+DST)
2014-05-08 07:38:29 System type: TMS DVBc
2014-05-08 07:38:38 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:38:38 CamState: using CIPlus mode
2014-05-08 07:38:38 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:38:38 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:39:03 EPG main language = ger
2014-05-08 07:39:03 EPGDB: Processing 1 eit files
2014-05-08 07:40:53 ===================================================
2014-05-08 07:40:53 SmartEPG_TMS  V6.1b
2014-05-08 07:40:53 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:40:53 TimeZone = 60 min (+DST)
2014-05-08 07:40:53 System type: TMS DVBc
2014-05-08 07:41:02 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:41:02 CamState: using CIPlus mode
2014-05-08 07:41:02 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:41:02 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:42:15 EPG main language = ger
2014-05-08 07:42:15 EPGDB: Processing 1 eit files
2014-05-08 07:44:06 ===================================================
2014-05-08 07:44:06 SmartEPG_TMS  V6.1b
2014-05-08 07:44:06 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:44:06 TimeZone = 60 min (+DST)
2014-05-08 07:44:06 System type: TMS DVBc
2014-05-08 07:44:15 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:44:15 CamState: using CIPlus mode
2014-05-08 07:44:15 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:44:15 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:44:40 EPG main language = ger
2014-05-08 07:44:40 EPGDB: Processing 1 eit files
2014-05-08 07:46:30 ===================================================
2014-05-08 07:46:30 SmartEPG_TMS  V6.1b
2014-05-08 07:46:30 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:46:30 TimeZone = 60 min (+DST)
2014-05-08 07:46:30 System type: TMS DVBc
2014-05-08 07:46:39 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:46:39 CamState: using CIPlus mode
2014-05-08 07:46:39 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:46:39 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:47:04 EPG main language = ger
2014-05-08 07:47:04 EPGDB: Processing 1 eit files
2014-05-08 07:48:20 ===================================================
2014-05-08 07:48:20 SmartEPG_TMS  V6.1b
2014-05-08 07:48:20 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:48:20 TimeZone = 60 min (+DST)
2014-05-08 07:48:20 System type: TMS DVBc
2014-05-08 07:48:29 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:48:29 CamState: using CIPlus mode
2014-05-08 07:48:29 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:48:29 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:49:29 EPG main language = ger
2014-05-08 07:49:30 EPGDB: Processing 1 eit files
2014-05-08 07:51:19 ===================================================
2014-05-08 07:51:19 SmartEPG_TMS  V6.1b
2014-05-08 07:51:19 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:51:19 TimeZone = 60 min (+DST)
2014-05-08 07:51:19 System type: TMS DVBc
2014-05-08 07:51:28 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:51:28 CamState: using CIPlus mode
2014-05-08 07:51:28 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:51:28 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:51:53 EPG main language = ger
2014-05-08 07:51:53 EPGDB: Processing 1 eit files
2014-05-08 07:53:42 ===================================================
2014-05-08 07:53:42 SmartEPG_TMS  V6.1b
2014-05-08 07:53:42 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:53:42 TimeZone = 60 min (+DST)
2014-05-08 07:53:42 System type: TMS DVBc
2014-05-08 07:53:51 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:53:51 CamState: using CIPlus mode
2014-05-08 07:53:51 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:53:51 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:54:16 EPG main language = ger
2014-05-08 07:54:16 EPGDB: Processing 1 eit files
2014-05-08 07:55:20 ===================================================
2014-05-08 07:55:20 SmartEPG_TMS  V6.1b
2014-05-08 07:55:20 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:55:20 TimeZone = 60 min (+DST)
2014-05-08 07:55:20 System type: TMS DVBc
2014-05-08 07:55:29 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:55:29 CamState: using CIPlus mode
2014-05-08 07:55:29 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:55:29 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:56:30 EPG main language = ger
2014-05-08 07:56:30 EPGDB: Processing 1 eit files
2014-05-08 07:58:21 ===================================================
2014-05-08 07:58:21 SmartEPG_TMS  V6.1b
2014-05-08 07:58:21 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 07:58:21 TimeZone = 60 min (+DST)
2014-05-08 07:58:21 System type: TMS DVBc
2014-05-08 07:58:30 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 07:58:30 CamState: using CIPlus mode
2014-05-08 07:58:30 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 07:58:30 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 07:58:55 EPG main language = ger
2014-05-08 07:58:55 EPGDB: Processing 1 eit files
2014-05-08 08:00:46 ===================================================
2014-05-08 08:00:46 SmartEPG_TMS  V6.1b
2014-05-08 08:00:46 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:00:46 TimeZone = 60 min (+DST)
2014-05-08 08:00:46 System type: TMS DVBc
2014-05-08 08:00:55 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:00:55 CamState: using CIPlus mode
2014-05-08 08:00:55 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:00:55 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:01:20 EPG main language = ger
2014-05-08 08:01:20 EPGDB: Processing 1 eit files
2014-05-08 08:03:11 ===================================================
2014-05-08 08:03:11 SmartEPG_TMS  V6.1b
2014-05-08 08:03:11 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:03:11 TimeZone = 60 min (+DST)
2014-05-08 08:03:11 System type: TMS DVBc
2014-05-08 08:03:20 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:03:20 CamState: using CIPlus mode
2014-05-08 08:03:20 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:03:20 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:03:46 EPG main language = ger
2014-05-08 08:03:46 EPGDB: Processing 1 eit files
2014-05-08 08:05:00 ===================================================
2014-05-08 08:05:00 SmartEPG_TMS  V6.1b
2014-05-08 08:05:00 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:05:00 TimeZone = 60 min (+DST)
2014-05-08 08:05:00 System type: TMS DVBc
2014-05-08 08:05:09 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:05:09 CamState: using CIPlus mode
2014-05-08 08:05:09 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:05:09 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:06:17 EPG main language = ger
2014-05-08 08:06:17 EPGDB: Processing 1 eit files
2014-05-08 08:07:41 ===================================================
2014-05-08 08:07:41 SmartEPG_TMS  V6.1b
2014-05-08 08:07:41 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:07:41 TimeZone = 60 min (+DST)
2014-05-08 08:07:41 System type: TMS DVBc
2014-05-08 08:07:50 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:07:50 CamState: using CIPlus mode
2014-05-08 08:07:50 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:07:50 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:08:16 EPG main language = ger
2014-05-08 08:08:16 EPGDB: Processing 1 eit files
2014-05-08 08:10:06 ===================================================
2014-05-08 08:10:06 SmartEPG_TMS  V6.1b
2014-05-08 08:10:06 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:10:06 TimeZone = 60 min (+DST)
2014-05-08 08:10:06 System type: TMS DVBc
2014-05-08 08:10:15 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:10:15 CamState: using CIPlus mode
2014-05-08 08:10:15 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:10:15 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:11:15 EPG main language = ger
2014-05-08 08:11:15 EPGDB: Processing 1 eit files
2014-05-08 08:13:03 ===================================================
2014-05-08 08:13:03 SmartEPG_TMS  V6.1b
2014-05-08 08:13:03 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:13:03 TimeZone = 60 min (+DST)
2014-05-08 08:13:03 System type: TMS DVBc
2014-05-08 08:13:12 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:13:12 CamState: using CIPlus mode
2014-05-08 08:13:12 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:13:12 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:13:37 EPG main language = ger
2014-05-08 08:13:37 EPGDB: Processing 1 eit files
2014-05-08 08:15:26 ===================================================
2014-05-08 08:15:26 SmartEPG_TMS  V6.1b
2014-05-08 08:15:26 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:15:26 TimeZone = 60 min (+DST)
2014-05-08 08:15:26 System type: TMS DVBc
2014-05-08 08:15:35 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:15:35 CamState: using CIPlus mode
2014-05-08 08:15:35 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:15:35 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:16:00 EPG main language = ger
2014-05-08 08:16:00 EPGDB: Processing 1 eit files
2014-05-08 08:17:09 ===================================================
2014-05-08 08:17:09 SmartEPG_TMS  V6.1b
2014-05-08 08:17:09 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:17:09 TimeZone = 60 min (+DST)
2014-05-08 08:17:09 System type: TMS DVBc
2014-05-08 08:17:18 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:17:18 CamState: using CIPlus mode
2014-05-08 08:17:18 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:17:18 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:17:43 EPG main language = ger
2014-05-08 08:17:43 EPGDB: Processing 1 eit files
2014-05-08 08:20:12 ===================================================
2014-05-08 08:20:12 SmartEPG_TMS  V6.1b
2014-05-08 08:20:12 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:20:12 TimeZone = 60 min (+DST)
2014-05-08 08:20:12 System type: TMS DVBc
2014-05-08 08:20:21 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:20:21 CamState: using CIPlus mode
2014-05-08 08:20:21 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:20:21 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:20:47 EPG main language = ger
2014-05-08 08:20:47 EPGDB: Processing 1 eit files
2014-05-08 08:22:38 ===================================================
2014-05-08 08:22:38 SmartEPG_TMS  V6.1b
2014-05-08 08:22:38 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:22:38 TimeZone = 60 min (+DST)
2014-05-08 08:22:38 System type: TMS DVBc
2014-05-08 08:22:47 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:22:47 CamState: using CIPlus mode
2014-05-08 08:22:47 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:22:47 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:23:12 EPG main language = ger
2014-05-08 08:23:12 EPGDB: Processing 1 eit files
2014-05-08 08:24:29 ===================================================
2014-05-08 08:24:29 SmartEPG_TMS  V6.1b
2014-05-08 08:24:29 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:24:29 TimeZone = 60 min (+DST)
2014-05-08 08:24:29 System type: TMS DVBc
2014-05-08 08:24:38 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:24:38 CamState: using CIPlus mode
2014-05-08 08:24:38 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:24:38 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:25:36 EPG main language = ger
2014-05-08 08:25:36 EPGDB: Processing 1 eit files
2014-05-08 08:27:25 ===================================================
2014-05-08 08:27:25 SmartEPG_TMS  V6.1b
2014-05-08 08:27:25 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:27:25 TimeZone = 60 min (+DST)
2014-05-08 08:27:25 System type: TMS DVBc
2014-05-08 08:27:34 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:27:34 CamState: using CIPlus mode
2014-05-08 08:27:34 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:27:34 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:27:59 EPG main language = ger
2014-05-08 08:27:59 EPGDB: Processing 1 eit files
2014-05-08 08:29:49 ===================================================
2014-05-08 08:29:49 SmartEPG_TMS  V6.1b
2014-05-08 08:29:49 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:29:49 TimeZone = 60 min (+DST)
2014-05-08 08:29:49 System type: TMS DVBc
2014-05-08 08:29:58 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:29:58 CamState: using CIPlus mode
2014-05-08 08:29:58 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:29:58 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:30:22 EPG main language = ger
2014-05-08 08:30:22 EPGDB: Processing 1 eit files
2014-05-08 08:32:14 ===================================================
2014-05-08 08:32:14 SmartEPG_TMS  V6.1b
2014-05-08 08:32:14 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:32:14 TimeZone = 60 min (+DST)
2014-05-08 08:32:14 System type: TMS DVBc
2014-05-08 08:32:23 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:32:23 CamState: using CIPlus mode
2014-05-08 08:32:23 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:32:23 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:32:48 EPG main language = ger
2014-05-08 08:32:48 EPGDB: Processing 1 eit files
2014-05-08 08:34:38 ===================================================
2014-05-08 08:34:38 SmartEPG_TMS  V6.1b
2014-05-08 08:34:38 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:34:38 TimeZone = 60 min (+DST)
2014-05-08 08:34:38 System type: TMS DVBc
2014-05-08 08:34:47 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:34:47 CamState: using CIPlus mode
2014-05-08 08:34:47 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:34:47 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:35:11 EPG main language = ger
2014-05-08 08:35:11 EPGDB: Processing 1 eit files
2014-05-08 08:36:28 ===================================================
2014-05-08 08:36:28 SmartEPG_TMS  V6.1b
2014-05-08 08:36:28 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:36:28 TimeZone = 60 min (+DST)
2014-05-08 08:36:28 System type: TMS DVBc
2014-05-08 08:36:37 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:36:37 CamState: using CIPlus mode
2014-05-08 08:36:37 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:36:37 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:37:36 EPG main language = ger
2014-05-08 08:37:36 EPGDB: Processing 1 eit files
2014-05-08 08:39:25 ===================================================
2014-05-08 08:39:25 SmartEPG_TMS  V6.1b
2014-05-08 08:39:25 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:39:25 TimeZone = 60 min (+DST)
2014-05-08 08:39:25 System type: TMS DVBc
2014-05-08 08:39:34 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:39:34 CamState: using CIPlus mode
2014-05-08 08:39:34 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:39:34 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:40:09 EPG main language = ger
2014-05-08 08:40:09 EPGDB: Processing 1 eit files
2014-05-08 08:41:57 ===================================================
2014-05-08 08:41:57 SmartEPG_TMS  V6.1b
2014-05-08 08:41:57 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:41:57 TimeZone = 60 min (+DST)
2014-05-08 08:41:57 System type: TMS DVBc
2014-05-08 08:42:06 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:42:06 CamState: using CIPlus mode
2014-05-08 08:42:06 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:42:06 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:42:31 EPG main language = ger
2014-05-08 08:42:31 EPGDB: Processing 1 eit files
2014-05-08 08:44:21 ===================================================
2014-05-08 08:44:21 SmartEPG_TMS  V6.1b
2014-05-08 08:44:21 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:44:21 TimeZone = 60 min (+DST)
2014-05-08 08:44:21 System type: TMS DVBc
2014-05-08 08:44:30 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:44:30 CamState: using CIPlus mode
2014-05-08 08:44:30 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:44:30 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:44:55 EPG main language = ger
2014-05-08 08:44:55 EPGDB: Processing 1 eit files
2014-05-08 08:46:00 ===================================================
2014-05-08 08:46:00 SmartEPG_TMS  V6.1b
2014-05-08 08:46:00 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:46:00 TimeZone = 60 min (+DST)
2014-05-08 08:46:00 System type: TMS DVBc
2014-05-08 08:46:09 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:46:09 CamState: using CIPlus mode
2014-05-08 08:46:09 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:46:09 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 08:47:10 EPG main language = ger
2014-05-08 08:47:10 EPGDB: Processing 1 eit files
2014-05-08 08:47:28 InfoboxMode: IBDM_TAPCOM - IBM_TV - IBPM_Rec
2014-05-08 08:47:31 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:47:47 Scanner: Total events    =    13400
2014-05-08 08:47:47 Scanner: Filtered events =     7225
2014-05-08 08:55:56 ===================================================
2014-05-08 08:55:56 SmartEPG_TMS  V6.1b
2014-05-08 08:55:56 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:55:56 TimeZone = 60 min (+DST)
2014-05-08 08:55:56 System type: TMS DVBc
2014-05-08 08:56:05 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:56:05 CamState: using CIPlus mode
2014-05-08 08:56:05 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:56:05 ScanTimerMonitor: ScanTimer has been set to 2014-05-09 06:59
2014-05-08 08:56:05 LogoManager: 9107 cache records have been loaded
2014-05-08 08:56:05 IQTuner TAP is running
2014-05-08 08:58:30 ScanTimer: last successful scan  @ 2014-05-08 07:03
2014-05-08 08:58:30 ScanTimer: next start slot       @ 2014-05-09 07:00
2014-05-08 08:58:30 TimerDB: deleting DB timer '00 'SmartEPG' (2014-05-09 07:00/2') (R=fedc, V=0000)'
2014-05-08 08:58:30 ScanTimer: slot needs to be      @ 20 minutes
2014-05-08 08:58:30 ScanTimer: timer has been set to @ 2014-05-09 07:00
2014-05-08 08:58:30 SE shutdown finished
2014-05-08 08:58:34 ===================================================
2014-05-08 08:58:34 SmartEPG_TMS  V6.2
2014-05-08 08:58:34 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 08:58:34 TimeZone = 60 min (+DST)
2014-05-08 08:58:34 System type: TMS DVBc
2014-05-08 08:58:34 RemoteType: 5000
2014-05-08 08:58:35 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 08:58:35 CamState: using CIPlus mode
2014-05-08 08:58:35 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 08:58:35 ScanTimerMonitor: ScanTimer has been set to 2014-05-09 06:59
2014-05-08 08:58:35 LogoManager: found a logo package. Uncompressing.
2014-05-08 08:58:35 LogoManager: cache rebuild initialized
2014-05-08 08:58:37 LogoManager: 9107 logo files found
2014-05-08 09:00:05 LogoManager: cache rebuild finished
2014-05-08 09:00:05 LogoManager: 9107 cache records have been loaded
2014-05-08 09:00:05 IQTuner TAP is running
2014-05-08 09:00:35 Rebuildnav: Finished
2014-05-08 09:00:35 # of transponders to be scanned = 1
2014-05-08 09:00:35 Scan mode is Rec
2014-05-08 09:00:35 Scanner: switching to transponder 32784 (Info Channel)
2014-05-08 09:00:36 FlashTimerDebug: difference found @ 'Entry (recursive)'
2014-05-08 09:00:39 FlashTimerDebug: difference found @ 'Entry (recursive)'
2014-05-08 09:03:30 Scanner: 26759 EIT sections received
2014-05-08 09:04:08 EPG main language = ger
2014-05-08 09:04:08 EPGDB: Processing 1 eit files
2014-05-08 09:05:46 ===================================================
2014-05-08 09:05:46 SmartEPG_TMS  V6.2
2014-05-08 09:05:46 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 09:05:46 TimeZone = 60 min (+DST)
2014-05-08 09:05:46 System type: TMS DVBc
2014-05-08 09:05:46 RemoteType: 5000
2014-05-08 09:05:55 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 09:05:55 CamState: using CIPlus mode
2014-05-08 09:05:55 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 09:05:55 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 09:06:20 EPG main language = ger
2014-05-08 09:06:20 EPGDB: Processing 1 eit files
2014-05-08 10:06:34 ===================================================
2014-05-08 10:06:34 SmartEPG_TMS  V6.2
2014-05-08 10:06:34 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:06:34 TimeZone = 60 min (+DST)
2014-05-08 10:06:34 System type: TMS DVBc
2014-05-08 10:06:34 RemoteType: 5000
2014-05-08 10:06:43 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:06:43 CamState: using CIPlus mode
2014-05-08 10:06:43 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:06:43 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:07:16 EPG main language = ger
2014-05-08 10:07:16 EPGDB: Processing 1 eit files
2014-05-08 10:08:55 ===================================================
2014-05-08 10:08:55 SmartEPG_TMS  V6.2
2014-05-08 10:08:55 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:08:55 TimeZone = 60 min (+DST)
2014-05-08 10:08:55 System type: TMS DVBc
2014-05-08 10:08:55 RemoteType: 5000
2014-05-08 10:09:04 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:09:04 CamState: using CIPlus mode
2014-05-08 10:09:04 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:09:04 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:09:28 EPG main language = ger
2014-05-08 10:09:28 EPGDB: Processing 1 eit files
2014-05-08 10:09:40 InfoboxMode: IBDM_InfoAndPVR - IBM_TV - IBPM_Rec
2014-05-08 10:09:41 InfoboxMode: IBDM_TAPCOM - IBM_TV - IBPM_Rec
2014-05-08 10:09:45 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:09:47 Stop-Key pressed - check for ending Recording...
2014-05-08 10:11:11 ===================================================
2014-05-08 10:11:11 SmartEPG_TMS  V6.2
2014-05-08 10:11:11 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:11:11 TimeZone = 60 min (+DST)
2014-05-08 10:11:11 System type: TMS DVBc
2014-05-08 10:11:11 RemoteType: 5000
2014-05-08 10:11:20 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:11:20 CamState: using CIPlus mode
2014-05-08 10:11:20 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:11:20 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:11:40 InfoboxMode: IBDM_TAPCOM - IBM_TV - IBPM_Rec
2014-05-08 10:11:45 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:11:46 EPG main language = ger
2014-05-08 10:11:46 EPGDB: Processing 1 eit files
2014-05-08 10:11:50 Stop-Key pressed - check for ending Recording...
2014-05-08 10:14:25 ===================================================
2014-05-08 10:14:25 SmartEPG_TMS  V6.2
2014-05-08 10:14:25 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:14:25 TimeZone = 60 min (+DST)
2014-05-08 10:14:25 System type: TMS DVBc
2014-05-08 10:14:25 RemoteType: 5000
2014-05-08 10:14:34 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:14:34 CamState: using CIPlus mode
2014-05-08 10:14:34 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:14:34 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:14:41 EPG main language = ger
2014-05-08 10:14:41 EPGDB: Processing 1 eit files
2014-05-08 10:16:39 ===================================================
2014-05-08 10:16:39 SmartEPG_TMS  V6.2
2014-05-08 10:16:39 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:16:39 TimeZone = 60 min (+DST)
2014-05-08 10:16:39 System type: TMS DVBc
2014-05-08 10:16:39 RemoteType: 5000
2014-05-08 10:16:48 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:16:48 CamState: using CIPlus mode
2014-05-08 10:16:48 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:16:48 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:24:15 ===================================================
2014-05-08 10:24:15 SmartEPG_TMS  V6.2
2014-05-08 10:24:15 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:24:15 TimeZone = 60 min (+DST)
2014-05-08 10:24:15 System type: TMS DVBc
2014-05-08 10:24:15 RemoteType: 5000
2014-05-08 10:24:24 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:24:24 CamState: using CIPlus mode
2014-05-08 10:24:24 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:24:31 EPG main language = ger
2014-05-08 10:24:31 EPGDB: Processing 1 eit files
2014-05-08 10:26:54 ===================================================
2014-05-08 10:26:54 SmartEPG_TMS  V6.2
2014-05-08 10:26:54 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:26:54 TimeZone = 60 min (+DST)
2014-05-08 10:26:54 System type: TMS DVBc
2014-05-08 10:26:54 RemoteType: 5000
2014-05-08 10:27:02 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:27:02 CamState: using CIPlus mode
2014-05-08 10:27:03 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:27:03 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:27:26 EPG main language = ger
2014-05-08 10:27:27 EPGDB: Processing 1 eit files
2014-05-08 10:27:57 Stop-Key pressed - check for ending Recording...
2014-05-08 10:28:09 Scanner: Total events    =    27328
2014-05-08 10:28:09 Scanner: Filtered events =     8909
2014-05-08 10:30:27 ===================================================
2014-05-08 10:30:27 SmartEPG_TMS  V6.2
2014-05-08 10:30:27 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:30:27 TimeZone = 60 min (+DST)
2014-05-08 10:30:27 System type: TMS DVBc
2014-05-08 10:30:27 RemoteType: 5000
2014-05-08 10:30:36 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:30:36 CamState: using CIPlus mode
2014-05-08 10:30:36 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:30:36 ScanTimerMonitor: ScanTimer has been set to 2014-05-09 06:59
2014-05-08 10:30:36 LogoManager: 9107 cache records have been loaded
2014-05-08 10:30:36 IQTuner TAP is running
2014-05-08 10:30:58 IQTuner TAP is not running
2014-05-08 10:30:58 Load IQTuner Settings
2014-05-08 10:30:58 Startreason: Manual
2014-05-08 10:30:59 Check if channel lists of Tuner 1 and Tuner 2 are matching
2014-05-08 10:30:59 Checking channel list for 358 TV-Channels
2014-05-08 10:30:59 Checking channel list for 299 Radio-Channels
2014-05-08 10:30:59 Channel lists of Tuner 1 and Tuner 2 are matching
2014-05-08 10:30:59 Searching for RebuildNAV/RecCopy
2014-05-08 10:30:59 RbN found at '/ProgramFiles/AutoStart/RebuildNAV.tap'
2014-05-08 10:33:03 ===================================================
2014-05-08 10:33:03 SmartEPG_TMS  V6.2
2014-05-08 10:33:03 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:33:03 TimeZone = 60 min (+DST)
2014-05-08 10:33:03 System type: TMS DVBc
2014-05-08 10:33:03 RemoteType: 5000
2014-05-08 10:33:12 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:33:12 CamState: using CIPlus mode
2014-05-08 10:33:12 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:33:12 ScanTimerMonitor: ScanTimer has been set to 2014-05-09 06:59
2014-05-08 10:33:12 LogoManager: 9107 cache records have been loaded
2014-05-08 10:33:12 IQTuner TAP is running
2014-05-08 10:35:16 Rebuildnav: Finished
2014-05-08 10:35:16 # of transponders to be scanned = 1
2014-05-08 10:35:16 Scan mode is Rec
2014-05-08 10:35:16 Scanner: switching to transponder 32784 (Info Channel)
2014-05-08 10:35:17 FlashTimerDebug: difference found @ 'Entry (recursive)'
2014-05-08 10:35:21 FlashTimerDebug: difference found @ 'Entry (recursive)'
2014-05-08 10:38:15 Scanner: 26759 EIT sections received
2014-05-08 10:38:58 EPG main language = ger
2014-05-08 10:38:58 EPGDB: Processing 1 eit files
2014-05-08 10:41:10 ===================================================
2014-05-08 10:41:10 SmartEPG_TMS  V6.2
2014-05-08 10:41:10 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:41:10 TimeZone = 60 min (+DST)
2014-05-08 10:41:10 System type: TMS DVBc
2014-05-08 10:41:10 RemoteType: 5000
2014-05-08 10:41:19 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:41:19 CamState: using CIPlus mode
2014-05-08 10:41:19 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:41:19 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:41:44 EPG main language = ger
2014-05-08 10:41:44 EPGDB: Processing 1 eit files
2014-05-08 10:43:55 ===================================================
2014-05-08 10:43:55 SmartEPG_TMS  V6.2
2014-05-08 10:43:55 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:43:55 TimeZone = 60 min (+DST)
2014-05-08 10:43:55 System type: TMS DVBc
2014-05-08 10:43:55 RemoteType: 5000
2014-05-08 10:44:04 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:44:04 CamState: using CIPlus mode
2014-05-08 10:44:04 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:44:04 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:44:29 EPG main language = ger
2014-05-08 10:44:29 EPGDB: Processing 1 eit files
2014-05-08 10:47:36 ===================================================
2014-05-08 10:47:36 SmartEPG_TMS  V6.2
2014-05-08 10:47:36 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:47:36 TimeZone = 60 min (+DST)
2014-05-08 10:47:36 System type: TMS DVBc
2014-05-08 10:47:36 RemoteType: 5000
2014-05-08 10:47:45 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:47:45 CamState: using CIPlus mode
2014-05-08 10:47:45 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:47:45 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:48:10 EPG main language = ger
2014-05-08 10:48:10 EPGDB: Processing 1 eit files
2014-05-08 10:50:23 ===================================================
2014-05-08 10:50:23 SmartEPG_TMS  V6.2
2014-05-08 10:50:23 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:50:23 TimeZone = 60 min (+DST)
2014-05-08 10:50:23 System type: TMS DVBc
2014-05-08 10:50:23 RemoteType: 5000
2014-05-08 10:50:31 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:50:31 CamState: using CIPlus mode
2014-05-08 10:50:32 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:50:32 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:50:39 EPG main language = ger
2014-05-08 10:50:39 EPGDB: Processing 0 eit files
2014-05-08 10:50:39 Scanner: Total events    =        0
2014-05-08 10:50:39 Scanner: Filtered events =        0
2014-05-08 10:50:39 ScanTimerMonitor: ScanTimer has been set to 2014-05-09 06:59
2014-05-08 10:50:39 LogoManager: 9107 cache records have been loaded
2014-05-08 10:50:39 IQTuner TAP is running
2014-05-08 10:51:47 ScanTimer: last successful scan  @ 2014-05-08 10:38
2014-05-08 10:51:47 ScanTimer: next start slot       @ 2014-05-09 07:00
2014-05-08 10:51:47 TimerDB: deleting DB timer '00 'SmartEPG' (2014-05-09 07:00/2') (R=fedc, V=0000)'
2014-05-08 10:51:47 ScanTimer: slot needs to be      @ 20 minutes
2014-05-08 10:51:47 ScanTimer: timer has been set to @ 2014-05-09 07:00
2014-05-08 10:51:47 SE shutdown finished
2014-05-08 10:52:24 ===================================================
2014-05-08 10:52:24 SmartEPG_TMS  V6.2
2014-05-08 10:52:24 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:52:24 TimeZone = 60 min (+DST)
2014-05-08 10:52:24 System type: TMS DVBc
2014-05-08 10:52:24 RemoteType: 5000
2014-05-08 10:52:32 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:52:32 CamState: using CIPlus mode
2014-05-08 10:52:33 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:52:33 ScanTimerMonitor: ScanTimer has been set to 2014-05-09 06:59
2014-05-08 10:52:33 LogoManager: 9107 cache records have been loaded
2014-05-08 10:52:33 IQTuner TAP is running
2014-05-08 10:53:44 Rebuildnav: Server not available
2014-05-08 10:53:44 # of transponders to be scanned = 1
2014-05-08 10:53:44 Scan mode is Rec
2014-05-08 10:53:44 Scanner: switching to transponder 32784 (Info Channel)
2014-05-08 10:53:44 FlashTimerDebug: difference found @ 'Entry (recursive)'
2014-05-08 10:53:48 FlashTimerDebug: difference found @ 'Entry (recursive)'
2014-05-08 10:56:40 Scanner: 26759 EIT sections received
2014-05-08 10:56:32 EPG main language = ger
2014-05-08 10:56:32 EPGDB: Processing 1 eit files
2014-05-08 10:59:15 ===================================================
2014-05-08 10:59:15 SmartEPG_TMS  V6.2
2014-05-08 10:59:15 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 10:59:15 TimeZone = 60 min (+DST)
2014-05-08 10:59:15 System type: TMS DVBc
2014-05-08 10:59:15 RemoteType: 5000
2014-05-08 10:59:24 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 10:59:24 CamState: using CIPlus mode
2014-05-08 10:59:24 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 10:59:24 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 10:59:49 EPG main language = ger
2014-05-08 10:59:49 EPGDB: Processing 1 eit files
2014-05-08 11:01:46 ===================================================
2014-05-08 11:01:46 SmartEPG_TMS  V6.2
2014-05-08 11:01:46 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 11:01:46 TimeZone = 60 min (+DST)
2014-05-08 11:01:46 System type: TMS DVBc
2014-05-08 11:01:46 RemoteType: 5000
2014-05-08 11:01:55 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 11:01:55 CamState: using CIPlus mode
2014-05-08 11:01:55 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 11:01:55 EPGDB: the DB check has found an inconsistency and has deleted the files
2014-05-08 11:04:58 ===================================================
2014-05-08 11:04:58 SmartEPG_TMS  V6.2
2014-05-08 11:04:58 SysID=42031(CRP-2401CI+), Firmware=TF-BCPCE 1.00.05 (Mar  9 2011) (0x0100), Rec=.rec
2014-05-08 11:04:58 TimeZone = 60 min (+DST)
2014-05-08 11:04:58 System type: TMS DVBc
2014-05-08 11:04:58 RemoteType: 5000
2014-05-08 11:05:07 CamState: APPL_STATE_CiPlus = 0x18
2014-05-08 11:05:07 CamState: using CIPlus mode
2014-05-08 11:05:07 InfoboxMode: IBDM_Hidden - IBM_TV - IBPM_Rec
2014-05-08 11:05:14 EPG main language = ger
2014-05-08 11:05:14 EPGDB: Processing 0 eit files
2014-05-08 11:05:14 Scanner: Total events    =        0
2014-05-08 11:05:14 Scanner: Filtered events =        0
2014-05-08 11:05:15 ScanTimerMonitor: ScanTimer has been set to 2014-05-09 06:59
2014-05-08 11:05:15 LogoManager: 9107 cache records have been loaded
2014-05-08 11:05:15 IQTuner TAP is running

[Twilight]

lösche mal bitte alle *.eit files und dann scanne neu

twilight

[makiao]

Hab ich schon Probiert (war gar nicht einfach, da ja immer auf diese eit zugegriffen wurde)
Bricht immer wieder früher oder später ab.
Kann es sein, dass UPC Cablecom Daten liefert, die zu diesem Verhalten führen? Eigentlich nicht, oder?

Ich habe auch mal smart epg deinstaliert (einstellungen behalten) und 6.1x neu installiert.

Ich hab auch einige Aufnahmen gelöscht um Platz zu schaffen, in der hoffnung, dass falls was an der Platte ist, die eit an einem anderen ort gespeichert wird.

[FireBird]

Auszuschließen ist es nicht, aber dann erwarte ich ähnliche Meldungen von mehreren Usern.

[makiao]

Ich versuch mal was passiert wenn ich ohne die CI+ Karte starte.

edit: Hat auch nichts gebracht, echt kurios.

[makiao]

Das sind die HDD Werte:

Code: Alles auswählen

HDDModel : ST31000322CS
HDDSerial: 

Attr                                        Description Value Worst  Thr       Raw   Flags
0x01                                     Lesefehlerrate  114   99    6  63551616  0x000f     wpr_o_
0x03                                         Anlaufzeit   95   93  ---         0  0x0003     w___o_
0x04                                  Start/Stop Zähler   95   95   20      5668  0x0032     ___cos
0x05                           Verbrauchte Reservesekt.  100  100   36         0  0x0033     w__cos
0x07                                    Such-Fehlerrate   84   60   30 272266622  0x000f     wpr_o_
0x09                                    Betriebsstunden   85   85  ---     13429  0x0032     ___cos
0x0a                                     Anlaufversuche  100  100   97         0  0x0013     w__co_
0x0c                                  Power Cycle Count   98   98   20      2833  0x0032     ___cos
0xb8                                   End-to-End Error  100  100   99         0  0x0032     ___cos
0xbb                      Reported Uncorrectable Errors   96   96  ---         4  0x0032     ___cos
0xbc                                    Command Timeout  100  100  ---     65537  0x0032     ___cos
0xbd                                    High Fly Writes   99   99  ---         1  0x003a     __rcos
0xbe                                Luftstromtemperatur   56   47   45        44  0x0022     ____os
0xc2                                         Temperatur   44   53  ---        44  0x0022     ____os
0xc3                             Hardware ECC Recovered   45   36  ---  63551616  0x001a     __rco_
0xc5                                  Unsicherer Sektor  100  100  ---         0  0x0012     ___co_
0xc6                       Unkorrigierbare Sektorenzahl  100  100  ---         0  0x0010     ___c__
0xc7                              UDMA CRC Fehleranzahl  200  200  ---         0  0x003e     _prcos

[makiao]

So ich habe ein restore von gestern aufgespielt, nun habe ich mal wieder epg und kann ihn normal benutzen, nun versuch ich mal ein scan anzustossen, und hoff das es klappt.

[dam]

Hallo

Ich habe seit heute genau das selbe Verhalten.

Bei mir wurde gestern Abend eine Meldung angezeigt, dass eine neue Software verfügbar sei. Die war aber für das CI+ Modul (Cablecom). Ich habe mit OK bestätigt und er angefangen, die Software runter zu laden. Aber irgendwie schien mir das nicht ganz reibungslos geklappt zu haben. Es wurde ca. 2 Min. 05% angezeigt und ging nicht mehr weiter, dann plötzlich war der Update fertig. Es wurden jedoch keine verschlüsselten Sender mehr gezeigt. Also Topf aus- und wieder eingeschaltet, dann war wieder alles ok, bis ein paar Minuten später wieder die Anzeige kam, dass eine neue Software verfügbar sei. Habe das ganze Spielchen drei, vier mal gemacht und dann aufgegeben.

Wie auch immer, habe heute morgen dann das Verhalten bez. EPG Scan festgestellt (vermutlich, nachdem um 5:00 Uhr der automatische, tägliche EPG Scan gelauften ist). Hat das vielleicht einen Zusammenhang mit dem CI+ Modul Update?

Im Moment habe ich SE mal aus dem Autostart genommen, somit bootet der Topf zumindest wieder problemlos. Halt einfach ohne SE-Funkionlalität.

Falls weitere Log-Files oder sonstige Infos vom Topf gewünscht sind, kann ich die heute abend beisteuern.

[Twilight]

jedenfalls hat deine festplatte einen schaden bzw .ist am sterben...und sonst: lies die bitte beitrag # 12 durch...(hab ich jetzt erst freigeschalten)

twilight

[c-h-b]

Hatte gestern genau das gleiche Phänomen (Scan bis zu einem bestimmten Punkt - Crash - Reboot - Scan - Crash - Reboot - etc.).

Habe dann ohne TAPs gestartet (Drücken von "0" während Startvorgang) und SmartEPG_Restore mit Stand vom 05.05. durchgeführt. Nachher ist der Scan zweimal ohne Crash durchgelaufen, hat allerdings (gefühlt...) länger gebraucht als sonst.
Ob der Scan heute zum programmierten Zeitpunkt funktioniert hat, weiss ich noch nicht...

PS: hab ebenfalls UPC Cablecom mit Digicard.


Edith meint: Das CI+ Modul-Update wurde schon vor einigen Tagen durchgeführt.

[makiao]

Bist du sicher Twilight, mit der Platte, die soll ja angeblich die Hohen werte anzeigen, aber trotzdem nicht kapputt sein. Soll ein fehlverhalten sein. (Falls nicht, was muss ich beachten beim wechsel? Das wär ja eine kleinigkeit)

Das Update für das ci modul habe ich nicht angenommen, und wie gesagt hab auch einen scann ganz ohne ci+ modul versucht.

[FireBird]

Code: Alles auswählen

0xbb                      Reported Uncorrectable Errors   4

Ist ein eindeutiges Indiz dafür, denn es gibt 4 nicht mehr lesbare Sektoren. Behalte diesen Wert im Auge, aber wenn er sich weiter erhöht, ist handeln angesagt.

[makiao]

Am 23.11.2012 waren es noch 0
Am 11.01.2014 waren es 3
Vielleicht wäre es nicht verkehrt da vorsorglich was zu machen.

Was muss ich beachten? Ist ja kaum so einfach wie: Alte raus, neue rein?
Und welche hdd ist zu empfehlen? Sparsam? Grösse? Anschluss? Wäre eine 2,5" sinnvoll oder gar ssd (ssd wohl kaum?)
Danke danke.

Und dann scheint das mit dem scan doch irgendwie mit upc cablecom zusammen zu hängen?!?

[FireBird]

Ist ja kaum so einfach wie: Alte raus, neue rein?

Naja, wenn man sich die Probleme hier so durchliest?

Und welche hdd ist zu empfehlen?

Da gibt es im Forum einige Empfehlungen. Siehe auch oben.

Und dann scheint das mit dem scan doch irgendwie mit upc cablecom zusammen zu hängen?!?

Sieht so aus. Mach einmal bitte ein komplettes Backup und schicke es mir per email zu. Die Adresse steht in meinem Profil.

[makiao]

Ich hatte gerade ein restore vom 5.5. gemacht und noch nicht neu gescannt (hat vorher auch in dem Fehler geendet) und hab den epg scan vorerst deaktiviert. Hilft dir ein backup davon?

Und theoretisch müsste doch auch eine 2,5" gehen, wäre bestimt sparsamer und leiser? Oder spricht da was dagegen? Merci

[FireBird]

Ein Backup hilft mir nur, wenn Daten drinnen sind, die zu einem Absturz führen.

Ich wüsste nicht, was technisch gegen eine 2,5" sprechen würde.